• 제목/요약/키워드: Condition of isolation

검색결과 425건 처리시간 0.027초

퍼지 로직 시스템을 이용한 항공기 가스터빈 엔진 오류 검출에 대한 연구 (Fault Diagnosis in Gas Turbine Engine Using Fuzzy Inference Logic)

  • 모은종;지민석;김진수;이강웅
    • 제어로봇시스템학회논문지
    • /
    • 제14권1호
    • /
    • pp.49-53
    • /
    • 2008
  • A fuzzy inference logic system is proposed for gas turbine engine fault isolation. The gas path measurements used for fault isolation are exhaust gas temperature, low and high rotor speed, and fuel flow. The fuzzy inference logic uses rules developed from a model of performance influence coefficients to isolate engine faults while accounting for uncertainty in gas path measurements. Inputs to the fuzzy inference logic system are measurement deviations of gas path parameters which are transferred directly from the ECM(Engine Control Monitoring) program and outputs are engine module faults. The proposed fuzzy inference logic system is tested using simulated data developed from the ECM trend plot reports and the results show that the proposed fuzzy inference logic system isolates module faults with high accuracy rate in the environment of high level of uncertainty.

노인요양시설 방역을 위한 시설 개선 방안 (Architectural Improvement plans in a quarantine system for Senior facilities)

  • 강지은;권순정;이현진
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제27권3호
    • /
    • pp.61-69
    • /
    • 2021
  • Purpose: Senior long-term care facilities are vulnerable to a cluster infection because of frequent physical contact, large group dining, communal living, and room sharing. This study aims to provide architectural improvement plans for a quarantine system in the facilities. Methods: Actual quarantine action data, guidelines from governments and institutes, in-depth interviews with facility staff are analyzed. Results: To prevent a cluster infection in the senior facilities, it is necessary to provide an architectural plan focusing on increasing the number of single rooms and isolation rooms, providing isolation rooms for staff, separation of a soiled room from a clean room, planing an entry vestibule and a visitor's room. Implications: It is important to analyze the existing condition of facilities that had been going through cohort isolation and provide the architectural solution to strengthen infection control.

공동주택 리모델링 현장의 바닥충격음 저감대책 (Reduction Method for Floor Impact Noise on APT Remodeling)

  • 박철용;홍구표;이중원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.524-525
    • /
    • 2009
  • Heavy-weight impact noise(HN) is the most irritating noise in Korean apartment houses. It has been proclaimed standard floor system of 210mm thick slab with isolation material in the wall type structure. But this regulation is applied only new construction field and is not considered remodeling field. In general, the LN can be reduced by using isolation material but HN is known as relating with stiffness, strength & boundary condition of slab. Therefore it is difficulty in improving the HN on remodeling field. In this study, We conducted the reinforcement of concrete slab using C.F.S.(carbon fiber sheet), steel plate and steel beam after on-dol with isolation material on the remodeling field. As the test results, It appeared using C.F.S was no improved but using steel plate & steel beam were a little improved on HN.

  • PDF

Mechanism and Application of NMOS Leakage with Intra-Well Isolation Breakdown by Voltage Contrast Detection

  • Chen, Hunglin;Fan, Rongwei;Lou, Hsiaochi;Kuo, Mingsheng;Huang, Yiping
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권4호
    • /
    • pp.402-409
    • /
    • 2013
  • An innovative application of voltage-contrast (VC) inspection allowed inline detection of NMOS leakage in dense SRAM cells is presented. Cell sizes of SRAM are continual to do the shrinkage with bit density promotion as semiconductor technology advanced, but the resulting challenges include not only development of smaller-scale devices, but also intra-devices isolation. The NMOS leakage caused by the underneath n+/P-well shorted to the adjacent PMOS/N-well was inspected by the proposed electron-beam (e-beam) scan in which VC images were compared during the in-line process step of post contact tungsten (W) CMP (Chemical Mechanical Planarization) instead of end-of-line electrical test, which has a long response time. A series of experiments based on the mechanism for improving the intra-well isolation was performed and verified by the inline VC inspection. An optimal process-integration condition involved to the tradeoff between the implant dosage and photo CD was carried out.

Isolation of New Strain of Cordyceps militaris HB8 and Optimal Condition for Production of Adenosine and Cordycepin in Fruit Body

  • Li, Jin Feng;Hoang, Van An;Ahn, Jong Chan;Yang, Dong Uk;Lee, Dong Wook;Yang, Deok Chun
    • 한국자원식물학회지
    • /
    • 제33권6호
    • /
    • pp.696-706
    • /
    • 2020
  • Cordyceps has been used in traditional Chinese medicine more than 2000 year ago. In this study, the new Cordyceps militaris was founded and isolated from O-dae mountain in Korea, and was identified its genetic characteristics. The newly isolation strain HB8 was most closet to Cordyceps militaris W141449 (99.82%), Cordyceps militaris JLCY-LI819 (99.82%) and Cordyceps militaris 4642 (99.81%), respectively. the genotypic result was show that train HB8 was belonging to the Cordyceps militaris genus, therefore, Cordycep militaris HB8 proposed with accession number MT835161. This study we find the optimal condition for production of cordycepin from Cordyceps militaris HB8 was 8 mg/g (200 g of pupa, 1 g of KH2PO4, 0.5 g of K2HPO4, 20 g of glucose, 1 g of MgSO4, 0.05 g of vitamin B1, and 1 mg of NAA per liter; light condition 300-700 Lux and day/night was 14 h/10 h) and the optimum condition for the production of adenosine was 2.6 mg/g (15 g of skim milk powder, 1 g of KH2PO4, 0.5 g of K2HPO4, 20 g of glucose, 1 g of MgSO4, 0.05 g of vitamin B1, and 1 mg of NAA per liter; light condition 300-700 Lux and day/night was 14 h/10 h).

Sodium polyanethol sulfonate의 혈액배양에서의 Salmonella typhi 분리에 대한 영향 (Effect of sodium polyanethol sulfonate on the isolation of Salmonella typhi from blood culture)

  • 정윤섭
    • 대한미생물학회지
    • /
    • 제9권1호
    • /
    • pp.13-18
    • /
    • 1974
  • Blood is one of the most important clinical specimens for the isolation of bacteria. A rapid isolation and a high isolation rate of bacteria are very important in blood culture because bacteremic patients are mostly in grave condition. Various blood culture media which support growth of most fastidious bacteria are available commercially. However, growth of bacteria are frequently delayed because of antibacterial activity of blood. Sodium polyanethol sulfonate(Liquoid) has been reported to inactivate the antibacterial substance and disrupt phagocytic cells. The beneficial effect of SPS is well recognized in the isolation of gram-positive bacteria. However, the effect does not seem to be prominent for gram-negative bacilli isolation mainly due to the rapidity of their growth. It has been experienced with Sal. typhi that the growth is much slower than that of other gram-negative bacilli. For the rapid growth of the organism, use of bile broth has been recommended. Although Sal. typhi is the most frequently isolated organism at present, about one half of total isolates are other organisms and, in case bile broth is used, other media which support growth of these organisms should be used together. Fluid thioglycollate medium(FTM) which is always used in blood culture to isolate anaerobes is inferior to brain heart infusion(BHI) for the isolation of aerobes. This study was done to determine the effect of SPS on the isolation of Sal. typhi from blood. During the Sep. 1973 to Sep. 1974 study period, 2460 blood cultures were made from the Severance hospital patients: BHI and FTM sets 1431 specimens, BHI with SPS(0.05%) and FTM sets 396 specimens, BHI and FTM with SPS sets 359 specimens, BHI and BHI with SPS sets 274 specimens. Mean incubation time required for the macroscopic detection of growth of Sal. typhi were 3.5 days on BHI and 2.7 days on BHI with SPS. The 0.8 day difference was statistically significant. On FTM the mean incubation time was 3.8 days while it was 2.9 days on FTM with SPS. The 0.9 day difference was statistically significant. The result on BHI with and without SPS sets showed faster growth on BRI with SPS in 7 specimens and slower growth in one specimen and the remaining 12 showed growth at the same time. These specimens had mean incubation time of 3.2 days on BHI and 2.3 days on BHI with SPS. The 0.9 day difference was statistically significant. This study indicates beneficial effect of SPS for the rapid isolation of Sal. typhi from clinical blood specimens.

  • PDF

수질사고 예방형 상수도 관망 밸브 시스템 설계 (A new approach to design isolation valve system to prevent unexpected water quality failures)

  • 박경진;신금채;이승엽
    • 한국수자원학회논문집
    • /
    • 제55권spc1호
    • /
    • pp.1211-1222
    • /
    • 2022
  • 상수도 관망 운영 단계에서 비정상상황은 필연적으로 발생하며, 이때 밸브를 이용한 구역의 격리가 필요하다. 밸브를 이용한 구역 격리 시 흐름 경로와 유향, 유속의 변화와 같은 수리적 변화로 인해 수리적 피해는 불가피하며, 대부분의 기존 연구들은 수리적 피해를 최소화할 수 있도록 밸브의 위치를 결정하여 왔다. 다만, 수리적 변화는 예지치 못한 수질 사고를 유발할 수 있기에, 격리 시 수질 사고 발생 여부를 미리 판단할 필요가 있다. 이에 본 연구에서는 밸브 위치에 따른 예지치 못한 수질 문제를 예방할 수 있는 밸브 설계 방안을 제안한다. 이를 위한 격리 전후의 관로별 흐름 특성 변화율을 정량화하는 유향 변경률 인자(Flow Direction Change Ratio, FDCR)와 신뢰도(reliability)를 고려한 최적 설계 방법론을 제안하였으며, 해당 모형을 가상 상수도 관망에 적용하여 FDCR 고려 유무에 따른 설계안을 비교하였다. 설계 결과 FDCR을 고려한 경우 기존 설계안 대비 유향 변동이 없는 것을 확인하였으며, 세그먼트 격리에 따른 절점별 압력과 관별 유속의 평균과 변동성을 확인한 결과 기존 설계안 대비 우수한 성능을 나타냄을 확인하였다. 또한 설계안 비교를 위해 그래프 이론 기반 인자인 수리학적 거리 인자(Hydrualic Geodesic Index, HGI)를 활용하였으며, HGI가 높은 설계안이 유향 변동성이 낮은 것으로 나타났다. 본 연구는 향후 수질 사고를 고려한 밸브 시스템의 설계 및 운영에 활용할 수 있을 것으로 기대한다.

접지면 위의 스터브를 이용한 LTE-PIFA의 격리도 개선 연구 (A Study on Isolation Improvement of LTE-PIFA Used Stub Structure on Ground Plane)

  • 박찬진;민경식
    • 한국전자파학회논문지
    • /
    • 제24권4호
    • /
    • pp.374-383
    • /
    • 2013
  • 본 논문은 Main 안테나와 LTE 대역을 커버하는 Sub 안테나로 구성되어 있는 휴대단말기의 접지면에 스터브를 삽입하여 격리 특성을 향상시킬 수 있는 설계법을 제안한다. 제안된 안테나의 공진 길이를 보상하고 높은 격리 특성을 실현하기 위해, 한 쌍의 스터브가 전류가 수렴되는 접지면 위에 삽입되었다. LTE class 13 대역에서 스터브가 없는 안테나의 모의 실험된 격리 특성은 약 -5 dB였으나, 두 개의 스터브를 가진 제안된 안테나의 격리 특성은 LTE class 13의 uplink(777~787 MHz)와 downlink(746~756 MHz)에서 약 -12 dB와 약 -15 dB의 높은 격리 특성을 나타냈다. 제작된 두 개의 스터브를 가진 안테나의 평균 이득은 약 -2 dBi 이상으로 상업용 휴대단말기에 요구되는 -4 dBi보다 좋은 결과를 보였다. 측정된 산란 파라미터 특성과 방사 패턴은 모의 실험결과와 합리적인 일치를 보였다.

수치적 시뮬레이션과 충격 시험을 통한 수직방향 진동절연 완충기 설계 및 성능 평가 (Design and Performance Evaluation of the Vibration Absorber of Vertical Direction Using Numerical Simulation and Shock Test)

  • 박상길;방승우;권오철;이정윤;오재응
    • 한국소음진동공학회논문집
    • /
    • 제18권5호
    • /
    • pp.558-563
    • /
    • 2008
  • Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc' spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock Isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

수치 모델링과 충격 시험을 통한 수직방향 진동절연 완충기의 성능 평가 (Performance Evaluation of the Vibration Absorber of Vertical Direction using Numerical Modeling and Shock Test)

  • 박상길;방승우;권오철;이정윤;오재응
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.990-993
    • /
    • 2008
  • Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc'spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing ho/t ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

  • PDF