• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.825-831
• /
• 2020

In modern society, automobiles have become an essential means of transportation. It is the only consumable that is worn by contacting the ground among automobile parts. If the tyres are severely worn, the tyres may be break, presenting a risk of a serious accident to the driver. To avoid this risk, drivers should check tyre pressure and tread condition before driving a car. Tyre inflation pressure can be easily measured by TPMS, but in the case of tyre tread conditions, it can be cumbersome when the driver measures it directly using a coin or vernier caliper. This hassle can expose the driver to traffic accidents due to tyre breakage by neglecting to measure the condition of the tyre tread. In this paper, we introduce the contents of research to design an IoT service-based system that can automatically measure automobile tyres, and we verified the possibility of realizing the system by actually implementing and testing some components of the system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.409-416
• /
• 2017

In order that multiple wideband RF transmitters which have mission to deliver essential information to aircraft operate at the same time, RF transmitter has a variable sub-carrier frequency to modulate the signal. In case of exposure to weak environment, Wide-band RF transmitter is designed to check component of transmitter that includes antenna BIT to increase system reliability. Normally, Antenna BIT measure the reflection RF power of antenna to check system condition. However, Antenna BIT has a difference that depends on testing frequency to use the long RF cable which is located between the power amp and the antenna. The periodic phenomenon of the reflected antenna power are theoretically explained about dependence on the RF cable length. Based on presented result, suggested measurement methods is effectively able to be applied to diagnosis system condition.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.86-91
• /
• 2012

This paper described validation results of COMS Ka band antennas beam coverages which were developed by ETRI. After satellite launch, In Orbit Test(IOT) activities are stat to check spacecraft and payloads are still in healthy condition after launch. During IOT phase, ETRI measured radiation patterns of COMS Ka band antennas and compare with ground test(CATR) results. The antenna patterns similarity between IOT results and CATR results show that COMS Ka band antenna withstand launch vibration and in the good healthy condition. After IOT, ETRI performed field test for beam coverage measurements with vehicle to check if Ka band beam coverage are formed well as designed. For the beam coverage measurement, 17 points were selected over the Korean peninsula. The field measurement data were very similar with CATR data and this confirms that beam coverage are formed well over the Korean peninsula as expected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.208-220
• /
• 2015

This study analyze Online class's current condition in Smart era. And suggest better operation model based on Internet Architecture. This study focuses the condition of e-learning operation model in University online class. Especially, 'Time Check Idea' that using for attendance on e-learning class has some side effects. So this study would applied 'Qualitative Check Idea Concept' on e-learning class. Question Based System, QBS is example model. QBS is leading a Learner's participation in e-class by Making Quiz. These quizs are shared with other students and refer to studing contents. Practically operating Qualitative Concept model QBS on university e-class, we can seek for the effectiveness of Qualitative e-learning model QBS.

• Journal of Korean Philosophical Society
• /
• v.147
• /
• pp.59-76
• /
• 2018

What are the conditions make a being x a moral agent? Can an artifact be moral agent? A moral agent is considered to be a rational being capable of distinguishing between right and wrong. This study critically analyzed Davidson's position on the condition of the rational being and argued that the network of beliefs with propositional attitude and the beliefs as their background cannot be a requisite for the rational being. Later, it proves that the conditions proposed by $Proke{\check{s}}ov{\acute{a}}$ are merely paratactically listed superficial elements. The moral agent in this study includes the rational agent and it is proven that the strong first person viewpoint is the necessary and sufficient condition for rational agent and moral agent. In conclusion, it suggested a the sketch of moderate skepticism which sets the tentative limit on the agent potential in an artifact by suggesting conditions for moral agent instead of intense skepticism that strongly denies the potential as the moral agent.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.1
• /
• pp.32-41
• /
• 2019

Objective : The purpose of this study is to develop a personal health record(PHR) application of atopic dermatitis in Korean Medicine(KM). Methods : We have identified the items necessary to provide an PHR application that helps to record and manage the symptoms of an atopic dermatitis in KM. We also derived the symptom collection process and method and applied it to the application. Results : In this study, the types of symptoms collected for atopic dermatitis were derived. Symptoms include daily check, stool/urine/sleep, daily emotion, meal management, symptom photographs, SCORAD, quality of life, progress check, original symptom, pediatric health check, weakness check, and subjective symptoms. The recording cycle can be divided into the first, daily, weekly, specific day, and subjective. We developed the PHR application of atopic dermatitis in KM by deriving the type of symptoms and symptom recording process. The app organized menus into dashboards, checklists, daily checks, and health records. Conclusions : We developed a PHR application for atopic dermatitis by deriving symptom collection items of atopic dermatitis and developing symptom collection process and collection technique. The app does not make an accurate diagnosis of atopic dermatitis symptoms, but it helps facilitate symptom collection and helps to identify or predict a person's health condition. It can also be used for medical treatment through sharing symptoms with Korean medicine. Patients are able to communicate in both directions on a daily, weekly, self-aware basis, at the request of a doctor, to record their symptoms and use them for medical purposes. If the doctor asks for a progress check to refer to the next examination, it can be written through the system. This manages atopic dermatitis in daily life and can be used in the clinical field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3A
• /
• pp.151-156
• /
• 2012

In this paper, design of quasi-cyclic(QC) low-density parity-check codes is proposed to have full diversity for space-time bit-interleaved coded modulation(ST-BICM) systems. Necessary and sufficient conditions that the proposed scheme has full diversity are proved as the condition that submatrices corresponding to the system part of codewords are invertible. And new construction method of binary invertible matrices for QC LDPC codes in ST-BICM systems are also proposed and modification for parity-check matrices are also explained.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.66-80
• /
• 1997

This paper describes a newly developed arc-sensing algorithm of seam-tracking for FCA W (flux-cored arc welding) horizontal fillet welding. In this algorithm, arc current and the Weighted-Are-Current (WAC) are used to adjust the position of a weld torch in directions of bead throat and weaving, respectively. The WAC, which is newly devised in this study, means that arc current in the vicinity of weaving end is more emphasized than that in the center of weaving. The reason of this is because there usually exists much noise in the center of weaving due to abrupt change of arc length in case some empty gaps exist in a fillet joint Variance analysis was performed in order to check the effect of weld parameters on arc current and the WAC. As a result, the relationships between tip-to-workpiece distance and arc current, and between weaving offset and the WAC were established.To check "the validity of the algorithm, seam-tracking experiments were performed ;mder various welding condition. The result of experiments showed a satisfactory tracking performance in the presence of empty gaps in a horizontal fillet joint.et joint.

• Journal of Korean Public Health Nursing
• /
• v.9 no.2
• /
• pp.104-114
• /
• 1995

This study was designed to develop preventing occupational disease programme in small-medium scale industries. The intervention was done in 354 enterprises from July to December in 1993 by health personnels in mobile occupational health centers. The summarized results of the above achievements were as follows. 1. Total number of enterprises were 354. Among them $66.9\%$ was under 100 workers, $26.6\%$ was u!1der 200 workers, and $6.5\%$ was belong to over 200 workers. The majority manufactures were non-metallic mineral product industries $(11.3\)$ fabricated metal product industries $(11.0\%)$. and textile industries $(10.7\%)$. 2. In 1993, for 350 enterprises were carried out evaluation of workplace environment. A total of $76.3\%$ industries were found to improper showing higher level of hazardous agent than the TLV. Noise and dust are the typical agent of which levels in workplace were high in most of industries. 3. A total 60 cases $(0.8\%)$ of occupational diseases were detected through physical check-up from 7,394 industrial workers in 1993. Detection rate by hazardous agent was highest among workers in relation to dust, and secondly highest to noise. 4. Through the systematic approach by hazardous agent was increased to the monitoring of work condition and follow up care of occupational disease. In future, there should be development in the scaled check list of preventing occupational disease management.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.80-83
• /
• 2010

This paper describes an analysis of decoding performance of multi-mode LDPC(Low Density Parity Check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3,3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder which adopts min-sum algorithm and layered decoding scheme is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, bit-width of integer and fractional parts, an optimal design condition and decoding performance of LDPC decoder are analyzed.