• 제목/요약/키워드: Concrete slab track

검색결과 138건 처리시간 0.028초

슬래브궤도의 콘크리트교량 적용성 검토 (Appliance of Slab tracks on the Prestressed Concrete Bridges)

  • 김남훈;임영수;신용준
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1037-1043
    • /
    • 2007
  • The railroad systems with the ballast tracks have been widely used for a long time. But recently, the use of the slab track is being increased gradually with a technical developments. So, this paper deals with the appliance of the slab tracks on the railroad bridges. Firstly, review the design criteria of the railroad bridges related to the slab tracks for the stability and serviceability, based on DIN and EURO code. Then, perform the analysis of the railroad prestressed concrete bridges, and check whether the results of the analysis satisfy the design criteria. Finally, find the construction condition of bridges that all the design criteria are satisfied. As a result, to maintain the stability and serviceability of the bridges, bridges must have some restrictions, including a time of installation of the slab tracks. So, the construction schedule for the erection of the bridges will be carefully considered in case of the concrete railroad bridges with the slab tracks.

  • PDF

슬래브 궤도에서 열차하중으로 인한 진동문제의 수치 해석적 연구 (Numerical Investigation on Vibrations due to Railway Loads on Slab Tacks)

  • 강보순
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 춘계학술대회 논문집
    • /
    • pp.91-96
    • /
    • 2003
  • In this report, numerical investigations have demonstrated, that the displacement underneath a moving loa야ng reach a maximum value, if the speed of the load is equal to propagation velocity of the maximum wave. The load speed for which the maximum displacement occurs is called critical speed. The critical speed divides the velocities in a subcritical and a super-critical region. By means of calculations the dynamic behaviour of the slab track-soil is investigated. For concrete slab track dynamic wheel load are given in dependence of relevant excitation mechanism and speed of the train. These loads can be used for the dimensioning of the track as well as for the prognosis of the vibrations at the track and the surrounding soil.

  • PDF

고속철도 콘크리트 궤도상 토공노반의 장기거동 특성 연구 (Study of the Long-Term Behavior Characteristics of Roadbed on Concrete Track of High-speed Railway)

  • 최찬용;정재현
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.8-16
    • /
    • 2018
  • 본 논문의 목적은 고속철도 콘크리트 궤도 및 노반 측정 데이터(노반압력, 진동가속도, 탄성변위 등)를 이용하여 토공노반의 장기거동을 분석하고 궤도 노반의 장기성능을 평가하고자 하는데 있다. 최근 고속철도 궤도 형식이 콘크리트 슬래브로 채택되고 있다. 그러나 콘크리트 궤도는 노반 침하에 취약하다. 자갈궤도의 경우 노반이 침하되어도 유지보수로 원상복구가 용이하다. 반면에 콘크리트 궤도의 경우 노반의 과도한 침하가 발생하면 도상 및 침목에 균열이 지속적으로 발생되고 사용성이 크게 저하된다. 이와 같은 이유로 부분보수만으로 원상복구가 어렵다. 본 논문에서는 운영 중 콘크리트 궤도에 대하여 건설 초부터 매설된 센서의 측정 데이터를 개통 후 약 3년까지 모니터링하여 장기성능평가를 수행하였다. 성능평가 방법은 열차별 궤도 토공노반 및 장기 궤도 노반 성능평가, 장기침하에 따른 궤도 노반 성능 영향 분석 및 장기 침하 영향인자 분석 등이다. 열차별 궤도 노반 성능평가에서는 KTX-산천중련의 노반응답이 가장 컸다. 장기 궤도 노반 성능평가 결과는 측정항목이 기준치이내로 측정되었다. 장기침하에 따른 궤도 노반 성능영향 평가는 TCL처짐은 침하와 깊은 연관이 있는 것으로 분석되었다. 장기침하의 외부영향인자 분석을 통해 함수비와 지하수위의 영향성을 확인하였다. 이와같은 방법을 통해 궤도상 토공노반의 안정성을 확보할 수 있을 것으로 사료된다.

탄성파시험에 의한 프리캐스트 슬래브궤도의 강성구조와 충전성능 평가 (Evaluation of Stiffness Structure and Grouting Efficiency beneath the Precast Slab Track by Elastic Wave Tests)

  • 이일화;조성호;장승엽;강윤석;한성우
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1303-1308
    • /
    • 2007
  • Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.

  • PDF

콘크리트 도상 분기 침목의 R.C 침목화 (Using the Turnout Reinforced Concrete Sleeper on Slab Track)

  • 이상진;김기훈;신순호;이인세
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2002년도 추계학술대회 논문집(I)
    • /
    • pp.633-641
    • /
    • 2002
  • Wooden-sleeper, which has been adopted as railway turnout in Korea, has created many problems such as short life span and increase of maintenance cost. Especially turnout on Maintenance Free slab track, which has been used in city metro, has been constructed with wooden sleeper buried in concrete roadbed due to complexity of structure. However, such problem as rapid erosion in subground makes it difficult to maintain the sleeper because of frequent replacement required. Therefore, the objective of this paper is to introduce design and construction of reinforced concrete(R.C) sleeper for turnout on the concrete roadbed to facilitate maintainability and economic construction of turnout.

  • PDF

궤도 흡음판의 성능확보를 위한 재료시험에 관한 연구 (Test methods for performance of noise absorbing block materials on railway)

  • 김진호;이광도;안광열
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.564-568
    • /
    • 2007
  • The construction of concrete slab track system is increased because the system has advantages which are maintenance free and so on, the other side, the system has weak points such as increase of the cost of the early stage construction and noise levels. Currently, concrete slab track systems has been designed for Gyungbu high speed line stage 2 and Honam high speed line. For those tracks, noise absorbing blocks are considered. Therefore, test methods and proper criteria for structural performance and reduction efficiency of noise absorbing blocks are required. The aim of this study is to provide provisons for installing acoustic-absorptive block on slab tracks.

  • PDF

콘크리트 슬래브궤도에서 철근이 ATP시스템 지상자의 주파수에 미치는 영향 (The Influence of Frequency on Wayside Transmitter of ATP System upon Reinforcing Bars in Concrete Slab Track)

  • 김민석;윤인모;고준석;이종우
    • 한국철도학회논문집
    • /
    • 제11권6호
    • /
    • pp.536-542
    • /
    • 2008
  • 콘크리트 슬래브궤도에서 ATP시스템 지상자를 이용한 신호 전류는 철근에 의해 신호전류에 영향을 미칠 수 있다. 즉, 콘크리트 슬래브궤도에서 ATP시스템 지상자와 철근의 자기적 결합은 하나의 필터로 작용하게 되어 입력전류신호에 왜곡을 주게 된다. 그리고 결국 왜곡된 신호에 의해서 열차의 차상자에 잘못된 신호가 전송될 수 있다. 입력전류신호의 왜곡을 줄이기 위한 방법으로 철근에 유도되는 전류와 주파수를 구하여 해당 주파수를 ATP시스템의 지상자 주파수로 사용하지 않거나, 철근을 절연시켜 철근과 ATP시스템 지상자간에 유도현상을 억제할 수 있다. 본 논문에서는 콘크리트 슬래브궤도에서 ATP시스템의 지상자와 철근의 모델을 전기적으로 표현하였고, 모델에 요구되는 값들을 Maxwell 프로그램을 이용하여 구하였다. 또한 모델로부터 ATP시스템인 KVB시스템, ERTMS/ETCS시스템에서 사용하고 있는 지상자의 주파수에 대한 지상자의 임피던스 및 철근의 유도전류를 계산하였다. 이를 Matlab 및 PSpice 프로그램으로 타당성을 입증하였다.

불연속 프리캐스트 콘크리트궤도 슬래브의 변형과 응력 분포 : I. 초기 및 온도 변형 (Deformation and Stress Distribution of Discontinuous Precast Concrete Track Slab : I. Initial and Temperature Deformation)

  • 이동훈;김기현;장승엽;지광습
    • 한국철도학회논문집
    • /
    • 제20권5호
    • /
    • pp.625-636
    • /
    • 2017
  • 본 연구는 프리캐스트 콘크리트궤도의 온도 변화에 따른 거동과 초기 변형 특성을 규명하고, 궤도 슬래브의 초기 변형과 온도 경사에 의한 변형이 열차하중에 의한 슬래브의 응력 분포에 미치는 영향을 고찰하는 것을 목적으로 한다. 본 논문은 2개의 논문 중 첫 번째 논문으로 이 논문에서는 프리캐스트 콘크리트궤도의 변형과 응력을 계산할 수 있는 유한요소 해석모델을 제시하였으며, 현장에 부설된 프리캐스트 콘크리트궤도에서 측정한 온도 분포와 변위를 해석 결과와 비교하였다. 분석 결과에 따르면 초기 변형에 의해 슬래브는 항상 상방향 컬링(curl-up)이 있는 상태에 있고, 측정된 깊이별 온도를 입력으로 하여 구한 슬래브 수직 변위와 계측 변위를 비교하면 초기 변형에 상응하는 슬래브 상하부 온도차, 즉 유효 내재 온도차(EBITD)를 결정할 수 있으며, EBITD를 적절히 가정하면 해석 변위와 계측 변위가 잘 일치하는 것으로 나타났다.

슬래브궤도의 소음저감을 위한 흡음재의 성능에 관한 연구 (The study of absorbing material performance for the noise mitigation of slab track)

  • 김진호;이광도;안광열;전우상
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1044-1049
    • /
    • 2007
  • The construction of concrete slab track system is increased because the system has advantages which are maintenance free and so on, the other side, the system has weak points such as increase of the cost of the early stage construction and noise levels. The increment of noise is due to the reflection of generated noise on the slab tracks. Therefore the acoustic-absorptive materials are considered to reduce noise level. It has been made clear that acoustic-absorptive materials are effective for reducing the wheel/rail noise on slab tracks. The important performance of the acoustic-absorptive material is absorption rates and absorption rates are verified for the considered absorber elements using acoustic duct method. In addition, the required provisons for installing acoustic-absorptive block on slab tracks are considered.

  • PDF

플로팅 슬래브궤도와 일반 콘크리트궤도 접속구간에서의 열차 주행 안전, 승차감 및 궤도 사용성 평가 (Assessment of Train Running Safety, Ride Comfort and Track Serviceability at Transition between Floating Slab Track and Conventional Concrete Track)

  • 장승엽;양신추
    • 한국철도학회논문집
    • /
    • 제15권1호
    • /
    • pp.48-61
    • /
    • 2012
  • 열차 진동 저감을 위한 플로팅 슬래브궤도의 설계에 있어서 주행 안전, 승차감 및 사용성을 확보하는 것이 매우 중요하다. 본 연구에서는 플로팅 슬래브궤도에서 열차 주행안전과 승차감, 사용성 확보를 위한 요구조건을 분석하여 제시하였고, 열차-궤도 상호작용을 고려한 동적 해석기법을 적용하여 시스템 고유진동수, 스프링 지지간격 및 배치방법, 감쇠비 등 주요 시스템 설계변수에 따라 일반 콘크리트궤도와의 접속구간을 포함한 플로팅 슬래브궤도 구간에서의 열차 및 궤도의 동적 거동을 분석하였다. 연구결과에 따르면 일반 궤도와 플로팅슬래브궤도 간의 접속구간에서의 지지강성의 차이에 의해 윤중 변동율, 레일 응력, 레일 인상력 등의 동적 응답이 크게 증가하는 것으로 나타났으며, 따라서 접속구간에서 스프링 지지간격을 좁히거나 스프링 강성의 차이를 완화시키는 방안이 주행안전과 궤도 사용성 확보를 위해 효과적인 것으로 나타났다. 한편 차체 가속도로 평가하는 승차감은 접속구간에서의 지지강성의 차이에 의해서는 거의 영향을 받지 않고, 시스템 튜닝 주파수에 의해 가장 큰 영향을 받는 것으로 나타났으며, 승차감 확보를 위해서는 적절한 시스템 튜닝 주파수를 선정하는 것이 매우 중요한 것으로 나타났다. 이 밖에 감쇠비, 스프링 간격, 열차속도에 따른 영향을 분석하였다.