• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.1-6
• /
• 1998

Recently, as to destruction and renovation of aged building, waste concretes have been reclaimed near foreshore and filled up underground. Recycling demolished concrete as aggregate helps to settle economic and environmental problems of obtaining superior aggregates from natural sources and to dispose waste concretes. An experimental study was carried out to investigate the strength characteristics of no-fine concrete containing recycled aggregates. The cement-aggregate weight ratios of 1: 5, 1: 6, 1: 7 and water-cement ratios of 30, 35, 40, 45% were chosen for the mix design of no-fine concretes. The compressive and splitting tensile strength at 7 and 28 days were measured for 12 different mixes. On the basis of test results, the optimum mix proportion of no-fine concrete containing recycled aggregates was determined and applied to the production of retaining wall block.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.328-331
• /
• 2004

Recently, the study for practical construction application of recycled aggregate concrete is actively being proceeded, on the purpose of technical development for recycling on the construction waste concrete occurred at the time of destruction of building construction by the rapid increase of building wastes and exhaustion of natural aggregates. This study is performed to develop the permeable polymer concrete using recycled coarse aggregate and blast furnace slag for application of structures needed permeability. At 7 days of curing, compressive strength, flexural strength, water permeability and flexural load are in the ragge of $18\~20MPa,\;6\~7MPa,\;4.6\times10^{-2}\~6.9\times10^{-2}cm/s$ and $20\~25kN$, respectively. It is concluded that the recycled aggregate can be used in the permeable polymer concretes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.449-454
• /
• 1999

Pavement concrete subjected to severe environmental condition may be vulnerable to frost attack practically where de-icing chemicals are used. This study focused on the investigation of durability characteristics of pavement concrete incorporation polypropylene fibers and application feasibility of these into the pavements of local roads and highway. A series of labortory tests were performed with main experimental variable such as fiber types, fiber contents. and type of concrete mix. The test of compressive strength was executed as primary tests, before the durability tests such as a scaling resistance were performed. De-icing salt resistance test was progressed by recycling freeze and thaw in the presence of a 4% calcium chloride solution. The deteriorated surfaces were rated by visual inspection and the loss weight were measured at every 5 cycles.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.45-50
• /
• 1997

Recycling of waste concrete will contribute not only to the solution of a growing waste disposal problem, also help to conserve natural resources of aggregate and to secure future supply of reasonably recycled aggregates for building construction purpose within large urban areas. Therefore, the purpose of this study is to analyze the applicability of recycled concrete in the influence of a substitute rate of recycled aggregate. As the result of this study, it is possible to conform that the recycled aggregate concrete substituted by 30~50% of the crushed aggregate can be applicated in site.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.24-30
• /
• 1996

Nowadays, Government is modifying envioronment regulatons, but PC factories, having been constructed in 1990, are running out heavy cost in disposal of waste concrete, and hardly studying how accelerator curing method affects in compressive strength. In this study, possibility that waste concrete, produced in PC factory, can be used in PC products, is reviewed, and them captures strength characteristics by curing method. The results can be summed as follows. In order to recycle concrete the mix ratio of recycled aggregate to 50 percent of less than must decrease also in summer of four seasons strength gap by curing method is very small.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.227-232
• /
• 2002

To evaluate the practical application of oyster shells as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells Is appreciably lower than that of normal concrete. 1'hereby, concrete with higher oyster shell has the possibility giving a bad influence on the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture ratio increases. Namely, the modulus is reduced by approximately 10∼15% when oyster shells are blended up to 20% replacing the fine aggregate. The drying shrinkage strain increases as the blending ratio increases. In addition, the existing model code of drying shrinkage does not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on freezing and thawing resistance, carbonation and sulfuric acid attack of concrete recycling. However, water permeability is considerably improved.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.76-79
• /
• 2004

The use of recycled aggregate concrete is increasing faster than the development of appropriate design recommendations. This paper is making advances in the recycling of waste concrete material for use as recycled aggregate to make secondary concrete product. Using recycled aggregates from demolished concrete, we manufactured concrete blocks to experiment overall performance in feasible performances. This paper reports limited experimental data on the structural performance of shear wall used concrete blocks made in recycled aggregates. Reinforced concrete frame and shear walls were tested to determine their diagonal cracking and ultimate shear behavior. The variable in the test program was the existence of infilled wall used concrete blocks Made in recycled aggregates. Based on the experimental results, Infilled wall has a high influence on the maximum strength and initial stiffness of reinforced concrete frame. Structural performance of specimen WSB1 and WSB2 is quite different from RCF specimen, particularly strength, stiffness and energy dissipation capacity.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.465-472
• /
• 2012

This research aims to find an effective mixing method for controlled low strength material (CLSM) using diverse recycled industrial byproducts. This study is a fundamental research to develop and commercialize a resource-recycling CLMS that can greatly contribute to cost reduction and environmental stress relief. In the past, few studies have been performed on CLSM in Korea. This research is expected to provide fundamental data not only for development and commercialization of the resource-recycling CLSM satisfying required material performances but also serve as a ground breaking study on utilization of recycled material in construction industry and ultimately leading to advanced resource-recycling practices at national level. From the comprehensive analysis of minimum unit quantity for maximum strength and material segregation prevention, it was found that the optimal mixing condition for mixing FSD, RSID and SD material to filler-aggregate ratio (f/a) was approximately 50.

• Journal of Wetlands Research
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1999

The objective of this study is to recover the contaminated ditch by using a biofilter filled up with waste-concrete media and vegetation bed. Two systems were tested for elimination of organic compounds, turbidity, nitrogen and phosphate. System 1 is three-stage system which consisted of one biofilter and two vegetation bed, system 2 has three-stage system consisted of one biofilter, one vegetation bed (four bed), and one media trench operated in series. In system 1, HRT of biofilter was 4 hour, and Oenanthe javanica was planted in two vegetation bed. In system 2, HRT of biofilter was varied 2 hours and Persicaria chinensis was planted on the top of the biofilter. And Oenanthe javanica, Hydrocharis asiatica, Salvinia natans were planted in four bed of a vegetation bed and the second vegetation bed of system 1 was rebuilt to a media trench bed. The elimination rate of BOD and turbidity was over 90% in both systems. The mean elimination rates 40~50%(system 1), 30~40%(system 2) for T-N and 40~50% (system 1), 30~40%(system 2)for T-P. T-N and T-P elimination performance of system 1 was a little higher(10%) than that of system 2. Results showed that vegetation bed are not efficient in reducing T-N and T-P. It was considered that HRT of vegetation bed of both systems was much lower(1~2hr) than that of conventional system(5~20days).

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.4
• /
• pp.153-161
• /
• 2020

This study investigates the recycling potential of demolition waste (DW) according to building structure, while considering economic aspects. For that, this study surveyed 1,034 residential buildings to collect reliable information on demolition waste generation rates (DWGRs). This study suggested a method for operational cost calculation for each stage and carried out an inventory analysis. The economic value of recycled DW materials was also calculated. And then, the recycling potential(RP) was calculated by building structures and waste types. RP by building structure was low (27-40%), and RP was found in the order of masonry-block, wooden, RC and concrete-brick. By type of DWs, the RP of aggregates was considerably lower than 7%, and DWs such as wood, plastics, and metals showed more than 100% RP. Considering the results of this study, In order to improve the RP of buildings and DWs, the diversification of products that recycled waste like aggregates (i.e., mortar, concrete, bricks, blocks, tiles) and the development of high value-added products are considered to be the most urgent problems. Based on the above RP results, this study proposed a more advanced method for life cycle assessment of buildings and demolition waste.