• 한국구조물진단유지관리공학회 논문집
• /
• 제11권6호
• /
• pp.193-200
• /
• 2007

고온을 받는 고강도 콘크리트의 폭렬현상을 해석하기 위하여 온도해석, 열응력해석 및 수분이동 해석과 더불어 콘크리트 피복의 박리여부까지 고려하여야 하는 매우 복잡하고 어려운 해석과정이 요구되나 아직 이에 대한 연구가 거의 없는 실정이다. 본 연구에서는 수증기 압력을 온도와 피복두께의 함수로서 정의하고 또한 적합조건을 이용함으로써 피복콘크리트의 박리여부를 예측할 수 있는 실용적인 폭렬해석 알고리즘을 개발하였다. 폭렬해석결과 콘크리트 강도가 증가 할수록 PP섬유량이 적을수록 폭렬현상이 심하게 발생하였으며, 이는 기존의 실험결과와 유사한 경향을 나타내어 향후 고강도 콘크리트 내화설계를 위한 폭렬해석 시 유용하게 활용될 수 있을 것으로 기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권2호
• /
• pp.195-201
• /
• 1998

The purpose of this study is to evaluate the flexural strengthening effects of RC beams reinforced with carbon fiber sheets (CFS) in variable of strengthening amount and anchorage length of CFS. This study can be summarized as follows ; The CFS shares the tensile stress such as rebar during loading test. Also, as the strengthening amount of CFS is increased, the maximum flexural strength of RC beams reinforced with CFS is increased. Therefore, it is confirmed that the CFS's strengthening method is very effective to improve the flexural strength of RC beams. The maximum flexural strength of RC beams with CFS is determined by bond failure between CFS and concrete surface. So, the evaluation of CFS's strengthening effect can be calculated using the tensile stress of CFS which is peeling. When the anchorage length of CFS is increased, the ductility of RC beams is increased because of delaying the peeling of CFS. But, in case of same anchorage length of CFS, when the strengthening amount of CFS is increased, the ductility is decreased. Therefore, it is considered that the anchorage of CFS in the end zone is necessary.

• Advances in concrete construction
• /
• 제8권3호
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.209-212
• /
• 2006

Until now, sulfate attack is not completely understood. The purpose of this study is to provide a fundamental data to understand deterioration mechanism by sulfate attack. Chemical processes for products formed by sulfate attack were explained in this study. ASTM C1012 test and microstructural observations such as XRD and BSE analysis were carried out to manifest behavior and role of the products formed during sulfate attack. Regarding the dominant causes of sulfate attack, the main deterioration modes could be divided into 3 types; (1) expansive type, (2) onion-peeling type, and (3) acidic type.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.509-512
• /
• 2006

In this study, the quality properties of recycled coarse aggregate, manufactured by the barcrusher, were compared to that of aggregate, manufactured by conservative systems. Test showed that recycled coarse aggregate, manufactured by the bar-crusher, had higher density and shape index, and exhibited lower absorption and abrasion ratios, compared with a con-crusher and an impact-crusher. This is due to the peeling-off effect of mortar, attached on recycled aggregate and the improved round shape of that.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.30-38
• /
• 2023

안전점검 대상 노후 건축물이 증가함에 따라 안전관리 주체인 지정기관 및 관리주체의 부담이 증가하고 있다. 이에 안전점검 대상 건축물 선정에 있어 적절한 안전전검 기준과 그에 따르는 적절한 기술은 필수적이다. 현행 노후 건축물 대상 안전점검 수행 기준은 마감재로 인해 구조 부재 균열 등의 손상 확인이 어려울 경우 낮은 점수를 부여하고 있다. 이는 구조물의 실체 안전상태와 관계없이 평가 결과가 과소평가되어 안전점검 대상 노후화 건축물을 증가시키는 원인이다. 이에 본 연구에서는 마감재 내부의 균열 탐지를 위해 비파괴·비접촉 검사인 열화상 기법을 제안하였다. 열화상 카메라를 이용한 마감재 내부 균열 관측을 위해 콘크리트 시편을 제작하였으며, 콘크리트 표면 및 균열부에 열원을 가진하여 열화상 데이터를 계측하였다. 계측 결과, 너비 0.3mm, 0.5mm, 0.7mm의 마감재 내부 균열 관측이 가능함을 확인하였으나, 표면 박리, 도배지 들뜸으로 인한 불균일한 온도 분포로 인해 균열 판단이 어렵다. 이에 열화상 데이터의 진폭 및 위상 차이를 도출하여 데이터 분석을 수행한 결과, 0.5mm, 0.7mm 균열에 대해 선명한 균열 계측이 가능하였다. 본 연구를 토대로 추후 마감재 내부 균열 손상 진단에 있어 빅 데이터 기반 딥러닝을 이용한 기술개발을 통해 현장적용 및 분석의 효율성을 증대시키고자 한다.

• 한국재난정보학회 논문집
• /
• 제20권2호
• /
• pp.390-397
• /
• 2024

연구목적:본 연구에서는 혹서 및 혹한 환경에 노출 콘크리트에서 발생할 수 있는 재난을 방지하기위해 PCM을 활용해 콘크리트에 열성능을 부여하고 내구성에 미치는 영향을 분석하였다. 연구방법:두 종류의 PCM을 시멘트 부피대비 10, 30, 50% 혼입한 콘크리트를 제작한 후 공극량, 동결융해 저항성, 스케일링 저항성을 평가하였다. 연구결과:종류에 상관없이 PCM 분말을 콘크리트에 혼입할 경우 공극량이 감소되는 것으로 나타났고 10%, 30% 혼입시 동결융해 저항성 또한 향상되는 것으로 나타났다. 또한 혼입량이 높아질수록 스케일링 저항성이 향상되는 것을 확인하였다. 결론: 분말형태의 PCM을 콘크리트에 혼입 시 일정수준까지는 채움효과에 의해 내구성을 향상시킬 수 있을 것으로 판단되며 실제 현장 적용을 위해서는 추가적으로 다양한 연구가 뒷받침 되어야 할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.579-584
• /
• 1998

The purpose of this study is to evaluate the flexural strengthening effects of RC beams reinforced with carbon fiber sheets (CFS) in variable of strengthening amount and anchorage length of CFS. This study can be summarized as follows. The CFS shares the tensile stress such as rebar during loading test. Also, as the strengthening amount of CFS is increased, the maximum flexural strength of RC beams reinforced with CFS is increased. Therefore, it is confirmed that the CFS's strengthening method is very effective to improve the flexural strength of RC beams. The maximum flexural strength of RC beams with CFS is determined by bond failure between CFS and concrete surface. So, the evaluation of CFS's strengthening effect can be calculated using the tensile stress of CFS which is peeling. When the anchorage length of CFS. But, in case of same anchorage length of CFS, when the strengthening amount of CFA is increased, the ductility is decreased. Therefore, it is considered that the anchorage of CFS in the end zone is necessary.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.121-129
• /
• 2017

본 연구에서는 콘크리트용 순환골재 고품질화 생산 방안으로 순환골재 파쇄횟수, 파 분쇄기와 박리 및 마쇄기 접목에 따른 순환골재의 품질을 검토하였다. 먼저 순환골재의 파쇄횟수 및 맨틀과 콘케이브 이격거리에 따라서 이격거리가 좁을수록, 파쇄횟수가 증가할수록 밀도, 흡수율 및 실적률의 품질이 향상되는 것으로 나타났다. 한편, 타격판 종류와 해머 개수에 따라서는 와이어매쉬를 타격판으로하고, 해머 개수가 증가할수록 밀도, 흡수율 및 실적률의 품질이 향상되는 것으로 나타나 해머크러셔와 콘크러셔의 적절한 조합을 통한 콘크리트용 순환골재의 품질향상이 가능할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.135-143
• /
• 2017

To upgrade shear performance of reinforced concrete (RC) beams, and particularly of the segments under negative moment within continuous T-section beams, a series of original schemes has been proposed using carbon fibre-reinforced polymer (CFRP) U-shaped strips for shear-strengthening. The current work focuses on one of them, in which CFRP U-strips are wound around steel bars against the top of the flange of a T-beam and then spliced on its bottom face in addition to being bonded onto its sides. The test results showed that the proposed scheme successfully provided reliable anchorage for U-strips and prevented premature onset of shear failure due to FRP debonding. The governing shear mode of failure changed from peeling of CFRP to its fracture or crushing of concrete. The strengthened specimens displayed an average increase of about 60% in shear capacity over the unstrengthened control one. The specimen with a relatively high ratio and uniform distribution of CFRP reinforcement had a maximum increase of nearly 75% in strength as well as significantly improved ductility. The formulas by various codes or guidelines exhibited different accuracy in estimating FRP contribution to shear resistance of the segments that are subjected to negative moment and strengthened with well-anchored FRP U-strips within continuous T-beams. Further investigation is necessary to find a suitable approach to predicting load-carrying capacity of continuous beams shear strengthened in this way.