• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.319-324
• /
• 1994

Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength(low, medium high, and ultra-high), bar diameter(13mm and 22mm), and concrete cover(25mm; 1-inch, 38mm; 1.5-inch, and 51mm; 2-inch). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Test results(ultimate bond stress) were compared with bond and development provisions of the ACI building Code(ACl 318-89) and local bond stress versus slip relationship diagram represented to show effect of the above variables.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.651-661
• /
• 2017

This paper presents an experimental study of bond-slip behavior of reinforced lightweight aggregate concrete (LC) and normal weight concrete (NC) with embedded steel bar. Tests were conducted on tension-pull specimens that had cross-sectional dimension with a reinforcing bar embedded in the center section. The experimental variables include concrete strength (20, 40, and 60 MPa) and coarse aggregate type (normal-weight aggregate and reservoir sludge lightweight aggregate). The test results show that as concrete compressive strength increased, the magnitudes of the slip of the LC specimens were greater than those of the NC specimens. Moreover, the bond strength and stiffness approaches zero at the loaded end, or close to the central anchored point of the specimen. In addition, the proposed bond stress-slip equation can effectively estimate the behavior of bond stress and steel bar slipping.

• 해양환경안전학회지
• /
• 제19권4호
• /
• pp.403-409
• /
• 2013

철근 및 FRP Bar를 보강재로 사용한 콘크리트 보의 전단 거동을 실험적으로 평가하였다. 실험 변수는 특성이 다른 보강근을 휨 및 전단 보강한 것과 전단보강근비이다. 콘크리트 보의 전단강도 산정에 일반적으로 널리 이용되는 수정트러스 이론의 타당성을 실험 결과의 분석을 통하여 평가하였다. CFRP 및 GFRP를 휨 및 전단 보강한 콘크리트 보에 그대로 적용하는 것은 적절하지 않음을 알 수 있었다. 실험결과는 FRP Bar를 보강근으로 사용한 콘크리트 보의 전단 문제에 수정트러스 이론을 그대로 적용하는 것은 타당하지 않다는 것을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.76-82
• /
• 2006

휨철근 대체재로 FRP Bar를 사용한 콘크리트 보에 대하여 휨보강근비의 변화에 따른 콘크리트의 전단강도를 일련의 콘크리트 보 실험을 통하여 조사하였다. 실험 결과, 콘크리트의 전단강도는 RC보의 경우보다는 낮은 값으로 나타났지만, 휨보강근비가 증가함에 따라 전단강도도 증가하는 것으로 분석되었다. 문헌에 제안된 식과 실험결과의 회귀분석을 이용하여 FRP Bar의 종류 및 휨보강근비를 고려한 전단강도보정계수를 제안하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.152-156
• /
• 2003

In this paper, we present the results of an experimental research on the load-deflection characteristics of full-scale concrete bridge decks reinforced with GFRP re-bars. Similar researches have been conducted in many countries to extend the service life of concrete bridge decks, which are under harsh environmental condition. Concrete bridge decks are one of the major concerns for the maintenance of bridges. GFRP re-bar available in the domestic construction market was investigated and the concrete deck reinforced with GFRP re-bars was tested under flexure to investigate the applicability of GFRP re-bar on the bridge deck construction.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.407-420
• /
• 2012

This study investigated possible ways to replace conventional stirrups used on high-strength concrete members with improved reinforcing materials. Headed bar and high-strength steel were chosen to substitute for conventional stirrups, and an experimental comparison between the shear behavior of high-strength concrete large beams reinforced with conventional stirrups and the chosen stirrup substitutes was made. Test results indicated that the headed bar and the high-strength steel led to a significant reserve of shear strength and a good redistribution of shear between stirrups after shear cracking. This is due to the headed bar providing excellent end anchorage and the high-strength steel successfully resisting higher and sudden shear transmission from the concrete to the shear reinforcement. Experimental results presented in this paper were also compared with various prediction models for shear strength of concrete members.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.371-374
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. In this study, long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP- and GFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution, acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• 한국공간구조학회논문집
• /
• 제22권1호
• /
• pp.59-66
• /
• 2022

In this paper, the flexural capacity equation of FRP-bar reinforced concrete beams was verified by comparing the experimental results and flexural capacity obtained according to the ACI procedure. And, also the economic feasibility of FRP-bar reinforced concrete beams was analyzed by comparing nominal moment capacity of beams. The results of analysis were as follows, 1) GFRP concrete beams have lower flexural performance than reinforced concrete beams, whereas CFRP concrete beams have similar flexural performance to reinforced concrete beams under the same reinforcement ratio 2) Although the design moment increased as the compressive strength of concrete increased, the flexural performance of GFRP reinforced concrete beams was found to be lower than the reinforced concrete beams for all reinforcement ratios.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.197-209
• /
• 2018

본 논문은 터널 설계 시 설계 인자에 따른 콘크리트 라이닝 절근량 절감에 관한 연구 이다. 콘크리트 라이닝의 설계는 과다한 하중적용에 따라 철근보강이 증가하게 되며, 경제성이 줄어들게 된다. 터널 시공의 경제성을 향상시키기 위해서는 콘크리트 라이닝의 설계인자에 대해 합리적인 기준이 필요하다. 따라서 본 연구에서는 콘크리트 라이닝의 설계에 적용되는 설계 인자에 대하여 특징 및 문제점을 분석하였다. 또한 설계인자 적용에 대한 콘크리트 라이닝의 경제성 검토는 수치해석을 이용하여 단면설계를 통해 산정된 철근 보강량을 비교하였다. 분석 결과에 의하면 콘크리트 라이닝 설계 시 설계 인자의 적용에 따라 필요 철근량이 다르게 나타났다. 따라서 이 연구를 통하여 콘크리트라이닝의 철근량을 경감시킬 수 있는 것으로 나타났다. 이 연구 결과는 향후 콘크리트 라이닝의 경제적 설계를 위하여 유용하게 활용될 수 있을 것으로 판단된다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.59-68
• /
• 2017

Mercury intrusion and nitrogen sorption porosimetry were employed to investigate the pore structure of calcium sulfoaluminate ($C{\bar{S}}A$) and portland cement pastes with cement-to-water ratio (w/c) of 0.40, 0.50, and 0.60. A unimodal distribution of pore size was drawn for $C{\bar{S}}A$ cement pastes, whereas a bimodal distribution was established for the portland cement pastes through analysis of mercury intrusion porosimetry. For the experimental results generated by nitrogen sorption porosimetry, the $C{\bar{S}}A$ cement pastes have a smaller and coarser pore volume than cement paste samples under the same w/c condition. The relative dynamic modulus and percentage weight loss were used for investigation of the concrete durability in freeze-thaw condition. When coarse aggregate with good freeze-thaw durability was mixed, air entrained portland cement concrete has the same durability in terms of relative dynamic modulus as $C{\bar{S}}A$ cement concrete in a freeze-thaw environment. The $C{\bar{S}}A$ cement concrete with poor performance of durability in a freeze-thaw environment demonstrates the improved durability by 300 % over portland cement concrete. The $C{\bar{S}}A$ concrete with good performance aggregate also exhibits less surface scaling in a freeze-thaw environment, losing 11 % less mass after 297 cycles.