• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.59-65
• /
• 2018

RC(Reinforced Concrete) structures are exposed to various exterior conditions, and the performances of both chloride resistance and freezing/thawing action are evaluated for those exposed to corrosive environment-sea shore. Recently developed FRP Hybrid Bars which is coated with glass fiber and epoxy with core steel has an engineering advantage of higher Elasticity than FRP rod. In this work, corrosion resistance, weight loss, and bond strength are evaluated for the FRP Hybrid Bar tested through freezing/thawing action for 300cycles. The double coated FRP Hybrid Bar shows the least weight loss without defection due to freezing/thawing action. Bond strength in FRP Hybrid Bar increases to 120% of normal steel through torturity effect with Si-coating. Bond strength in normal steel shows 0.86~0.89times in 3-day corrosion acceleration and 0.35~0.38times in 5-day corrosion acceleration, however, that in FRP Hybrid Bar shows little changes in bond strength before and after freezing/thawing action.

• Journal of Engineering Education Research
• /
• v.10 no.2
• /
• pp.44-61
• /
• 2007

The present investigation is concerned chiefly with new curriculum development at the Department of Mechanical System & Design Engineering at Hongik University with the aim of enhancing creativity, team working and communication capability which modern engineering education is emphasizing on. 'Mechanical System & Design Engineering' department equipped with new curriculum emphasizing engineering design is new name for mechanical engineering department in Hongik University. To meet radically changing environment and demands of industries toward engineering education, the department has shifted its focus from analog-based and machine-centered hard approach to digital-based and human-centered soft approach. Three new programs of Introduction to Mechanical System & Design Engineering, Creative Engineering Design and Product Design emphasize hands-on experiences through project-based team working. Sketch model and prototype making process is strongly emphasized and cardboard, poly styrene foam and foam core plate are provided as working material instead of traditional hard engineering material such as metals material because these three programs focus more on creative idea generation and dynamic communication among team members rather than the end results. With generative, visual and concrete experiences that can compensate existing engineering classes with traditional focus on analytic, mathematical and reasoning, hands-on experiences can play a significant role for engineering students to develop creative thinking and engineering sense needed to face ill-defined real-world design problems they are expected to encounter upon graduation.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.598-607
• /
• 2016

The purpose of this study is to suggest necessity of idea expression method suitable for people in our country and deduct Graphic Ideation method by grasping problems of existing idea expression method. The idea expression method (association stimulating method, conceptual shifting method, information combination method) used by many graphic designers is effective in suggesting initial keyword, but has difficulty in the course of deducting the concept. Though deduction of core keyword is important to develop as a concept, the course of separation, combination in keyword connection play an important role, and most of idea expression methods are unavailable for suggesting concrete method for the course. Also as most of idea expression methods were developed and delivered in English-speaking world, it is suitable in English-speaking world culture which has thinking focused on words, but people in our country, which have thinking focusing on narration, cannot consider difference in language thinking due to limitation in idea for each stage. This study deducted idea expression method suitable for emotion of people in our country by proving the value of this idea expression method with style of suggesting and demonstrating 4 hypotheses in order to make the course for easy connection, separation, combination of keyword deducted by existing idea expression method, as well as suggesting idea expression method design based on these hypotheses. This idea expression method used rhetoric so that it is suitable for people our country who are strong for narration expression.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.1018-1029
• /
• 2008

Recently, RFID(Radio Frequency Identification) application technology is the core of ubiquitous technology. this research examines the factors for adopting the RFID application technology together with factors for adopting the related information system such as ERP, SCM, EDI by researching relevant literature. this research attempts to derive the factors for adopting RFID application technology by using the Delphi Method. The factors for adopting the information technology of the above-mentioned three areas totaled 116 adoption factors. Based on these 116 adoption factors, the factors for adopting RFID application technology were to be derived. A total of 27 adoption factors were derived in the first Delphi investigation. Of the total 27 adoption factors, final 9 adoption factors could be derived by conducting frequency analysis and relative importance analysis. In other words, 9 adoption factors that were derived last were found to be the cost related to tag, relationship with customer firms, compatibility of technology, information technology-based structure, trust and coordination between business firms, intensity of competition within the industry, the standardization of RFID technology, the top management's support and participation degree of client companies. When business firms try to adopt RFID application technology afterwards, concrete and close examination from this point of view was found to be necessary.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.631-643
• /
• 2018

This study is the first ever attempted series paper of one particular TV drama writer, Su-Hyeon Kim, with diversified and systematic scale. Along with the just before study, proving Su-Hyeon Kim's line's conceptual properties as the Bahktin's dialogism, its core of polyphony, this study is to analyze the concrete method of creation through Bahktin's Canivalistic creation component of 'Grotesque Realism' and 'Unofficial Square Language'. With her work of (SBS, 1992), this study verifies its characteristic creation of lines to be the 'Grotesque Realism' components of overturn, destruction, and creation along with 'Unofficial Square Language' components of the masses, material, physical language, and discourse of self-liberation. In this way, this study is on one hand, to overcome the application problem of Bahktin's theory as a separated one, but also to enhance the quality of the study of the writer and the lines. As a result, she has acquired her own distinction of ambivalence by the way of demotion, overturn with masses' material, physical, unofficial square language along with a stronger execution of acquiring self denial, positivity. liberation, and life. Therefore the writer is highly rated for her fierce cognition of language and her artistic spirit. Also, this paper proposes the following study to appraise the impact of the writer's differentiation and artistic spirit on the creation of Korean TV drama, contents industry, and mass media.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1172-1179
• /
• 2020

As a Lagrangian particle method, Moving Particle Semi-implicit (MPS) method has great capability to capture interface/surface. In recent years, the multiphase flow simulation using MPS method has become one of the important directions of its developments. In this study, some key methods for multiphase flow have been introduced. The interface tension model in multiphase flow is modified to maintain the smooth of the interface and suitable for the three-phase flow. The mass transfer at immiscible liquid interface entrained by single bubble which could occur in Molten Core-Concrete Interaction (MCCI) has been investigated using this particle method. With the increase of bubble size, the height of entrainment column also increases, but the time of film rupture is slightly different. With the increase of density ratio between the two liquids, the height of entrained column decreases significantly due to the decreasing buoyancy of the denser liquid in the lighter liquid. In addition, the larger the interface tension coefficient is, the more rapidly the entrained denser liquid falls. This study validates that the MPS method has shown great performance for multiphase flow simulation. Besides, the influence of physical parameters on the mass transfer at immiscible interface has also been investigated in this study.

• Journal of The Korean Association For Science Education
• /
• v.32 no.2
• /
• pp.388-401
• /
• 2012

This study attempted to propose a theoretical model for STEAM education, entitled to the Ewha-STEAM education model, which could provide more concrete guidelines for science educators and curriculum developers to execute STEAM ideas. We identified key knowledge and key competencies to nurture future creative/convergent human resources. Key knowledge included an understanding of core ideas cutting across traditional disciplinary boundaries as well as the nature of different disciplines. And additionally, key competencies implied such abilities as to explore the scientific world, to resolve problems, and to communicate and collaborate with others. We also added creativity and character as an essential part of key competencies. In order to provide more specific guidelines when developing, implementing, and evaluating STEAM curriculum, we suggested three elements of convergence to consider: 1) unit of convergence (i.e. concept/skills, problem/phenomenon, activity), 2) degree of convergence (i.e. multi-disciplinary, inter-disciplinary, extra-disciplinary), and 3) context of convergence (i.e. personal, societal, global). It is expected that the Ewha-STEAM education model would contribute towards diverse education communities understanding the direction of STEAM education and its educational potentials.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.947-956
• /
• 2005

Software(S/W) reengineering is one of the effective technologies to produce a business worth and en and the S/W ROI continuously. In spite of, S/W reengineering has been recognized a cost-consumptive works with inefficient productivity. In fact we have used to transform to confusion system with destructive system architecture by extending and updating legacy system in a temporary expedients. Moreover it is impossible to provide the time-market products for coping with rapid changeable system environment and meeting to complicated customer's requirements. Therefore, we need a systematic reengineering methodology to fulfill the changeable environment, as appearance of new IT techniques, various alteration of business information model, and increment of business logic. Legacy systems can be utilized as the core property in business organization through reengineering methodology. In this paper, we target to establish the reengineering process, proposed MaRMI-RE consisting of initial Planning phase, reverse engineering and component transformation phase. To describe the MaRMI-RE, we presented the concrete tasks and techniques and artifacts per individual phase in process, and the case study is showed briefly.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.5-11
• /
• 2012

The core objective of this research article is to investigate different challenges and opportunities in management as well as start-ups of small businesses in India. The prudence behind this research is to examine various problems in front of the small businesses and to offer vital support and cooperation to overcome those with the support of concerned institutions through consultancy and training programs. The researchers have an intention to make available the research results to the governmental agencies, concerned small business institutions and also to the educational institutions which are continually design plans, programs, policies and strategies to upgrade the managerial and technical dexterities of the small business Indian operators. After thorough revision of relevant literature on small businesses and its management, the researchers used a well structured questionnaire and in-depth personal interviews with 586small business operators selected from manufacturing, trading (retailing and wholesaling), finance, servicing/repair businesses which are located in the coastal districts of Andhra Pradesh in India. The researchers have used convenience sampling and collected data was analyzed with the support of Microsoft Excel and frequency distribution. Noticeably, majority of the small businessmen in India are facing myriad number of challenges both in management and at the time of establishment of their business operations. In particular, 72.47 percent of small businesses operators' have substantiated their strong opinion towards the challenges they are facing particularly finance, marketing and other problems while managing their businesses. The researchers also attempted to get the opinions on problems of the various categories of small businesses while starting their operations. A staggering 68percent of respondents identified the problems related to preparation of business plan, location selection, marketing and other problems like lack of proper credit facilities, skilled manpower, and other infra related problems while setting up of their businesses. On an average, 64.62 and 63.51 percent of small businesses are facing various kinds of problems both at the time of day-to-day management as well as start-up of their businesses respectively. The present research confined with the opinions of only four categories of small business operators particularly from the manufacturing, finance, trading (retailing and wholesaling), and servicing/repair which are continuing their business operations from the nine coastal districts of Andhra Pradesh in India. The present study emphatically provides concrete information required to the business community for identifying an assortment of challenges faced by different small business operators in managing and at the time of their inception. This research paper is first of its kind from this part of the world by offering extensive and credible information required for prospective entrepreneurs in facing the dynamic challenges in managing their business. Furthermore, this research presents invaluable inputs to the stakeholders like all types of governments, policy makers, practitioners, researchers, and educators' about the various impediments faced by the small business community in India.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.23-34
• /
• 2018

Recently, mainly in downtown, there have been frequent safety incidents in underground space like ground subsidence and land sinking. Out of diverse coping measures, the government is carrying forward the establishment of underground space integrated map. As a core element of the underground space integrated map, the 3D geotechnical information is used as major data of underground space impact assessment obliged in accordance with the "Special Act on the Safety Control of Underground Space Safety". The construction method of 3D geotechnical information is drawn when establishing the basic establishment plan of underground space integrated map, and the continuous construction is performed by the Integrated DB Center of National Geotechnical Information. However, it is necessary to draw concrete measures with accuracy, efficiency, and utilization. This study drew the construction plan considering the accuracy, utilization, and efficiency of 3D geotechnical information for the support of underground space safety. For this, accuracy between elevation and underground level is compared using MVS and MakeJiban which are software to construct boring information with geotechnical information in geotechnical information portal system. In the results of general analysis, the milepost-based construction of whole strata in a lump would be the most suitable in the aspect of accuracy, utilization, and efficiency. Based on the results of this study, Plan to construct 3D geotechnical information will be pursued.