• Korean journal of medical education
• /
• 제30권4호
• /
• pp.347-357
• /
• 2018

Purpose: The purpose of this study was to apply alternative standard setting methods for the Korean Medical Licensing Examination (KMLE), a criterion-referenced written examination, and to compare them to the conventional cut score used on the KMLE. Methods: The process and results of criterion-referenced standard settings (i.e., the modified-Angoff and bookmark methods) were evaluated. The ratio of passing and failing examinees determined using these alternative standard setting methods was compared to the results of the conventional criteria. Additionally, the external, internal and procedural evaluation of these methods were reviewed. Results: The modified-Angoff method yielded the highest cut score, followed sequentially by the conventional method and the bookmark method. The classification agreement between the modified-Angoff and bookmark methods was 0.720 measured by Cohen's ${\kappa}$ coefficient. The intra-panelist classification consistency of modified-Angoff method was higher than bookmark method. However, the inter-panelist classification consistency was vice versa. The standard setting panelists' survey results showed that the procedures of both methods were satisfactory, but panelists had more confidence in the results of the modified-Angoff method. Conclusion: The modified-Angoff method showed results that were more similar to those of the conventional method. Both new methods showed very high concordance with the conventional method, as well as with each other. The modified-Angoff method was considered feasible for adoption on the KMLE. The standard setting panelists responded positively to the modified-Angoff method in terms of its practical applicability, despite certain advantages of the bookmark method.

• 천문학회보
• /
• 제46권1호
• /
• pp.27.3-27.3
• /
• 2021

Supernova (SN) cosmology is based on the assumption that the width-luminosity relation (WLR) in the type Ia SN luminosity standardization would not vary with progenitor age. Unlike this expectation, recent age datings of stellar populations in host galaxies have shown significant correlations between progenitor age and Hubble residual (HR). It was not clear, however, how this correlation arises from the SN luminosity standardization process, and how this would impact the cosmological result. Here we show that this correlation originates from a strong progenitor age dependence of the WLR and color-luminosity relation (CLR), in the sense that SNe from younger progenitors are fainter each at given light-curve parameters x1 and c. This is reminiscent of Baade's discovery of two Cepheid period-luminosity relations, and, as such, causes a serious systematic bias with redshift in SN cosmology. We illustrate that the differences between the high-z and low-z SNe in the WLR and CLR, and in HR after the standardization, are fully comparable to those between the correspondingly young and old SNe at intermediate redshift, indicating that the observed dimming of SNe with redshift is most likely an artifact of over-correction in the luminosity standardization. When this systematic bias with redshift is properly taken into account, there is no evidence left for an accelerating universe, and the SN data now support a decelerating cosmic expansion. Since the SN cosmology has long been considered as the most direct evidence for an accelerating universe with dark energy, this finding poses a serious question to one of the cornerstones of the concordance model.

• 대한중풍순환신경학회지
• /
• 제13권1호
• /
• pp.63-70
• /
• 2012

Object : Traditional Korean Medicine Diagnostic Support System(TKMDSS) is the diagnostic prescribing system based on ontology developed by Korea Institute of Oriental Medicine. We monitored and assessed its usefulness and searched for improvements. Methods : We collected 10 cases of stroke inpatients of Dongguk University Ilsan Oriental Hospital. They were diagnosed by primary care physician and another researcher who monitored using "TKMDSS" respectively. We compared the process and results of two diagnosis. Results : The diagnostic concordance rate between primary care physician and researcher were pretty high. Most of the problems were caused by expressions on symptoms inappropriate use of terminology. The severity of symptoms and vague symptoms which is hard to be diagnosed should be reflected and measured in this system. Conclusions : The problems were about terminology and definition. The terminology should be defined accurately and in-depth detail so that anyone can get the right information. If the problems were modified, "TKMMSS" could be utilized as supportive measures for oriental medicine doctors and students.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.26-39
• /
• 2010

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.

• Steel and Composite Structures
• /
• 제19권4호
• /
• pp.861-876
• /
• 2015

Composite sections design consists on checking that the point defined by axial load and bending moment keeps included within the surface enclosed by the section interaction curve. Eurocode 4 suggests a method for tracing this diagram based on the plastic stress distribution method. However curves obtained according to this criterion overvalue concrete encased sections bearing capacity, especially when axial force comes with high bending moment values, so a correction factor is required. This article proposes a method for tracing this diagram based on the strain compatibility method. When stresses on the section are integrated by considering the Navier hypothesis, the use of the materials nonlinear constitutive equations provides curves much more adjusted to reality. This process requires the use of rather complex software which might reveal as too complex for practitioners. Preserving the same criteria of an elastic-plastic stress distribution, this article presents alternative expressions to obtain the failure internal forces in five significant points of the interaction diagram having considered five different positions of the neutral axis. These expressions are simply enough for their practical application. Concordance of curves traced strictly relying on these five points with those obtained by computer assisted stress integration considering the strain compatibility method and even with Eurocode 4 weighted curves will be presented for three different cross-sections and two different concrete strengths, revealing very good results.

• 한국축산식품학회지
• /
• 제34권6호
• /
• pp.763-768
• /
• 2014

The identity of 45 Hanwo and 47 imported beef (non-Hanwoo) samples from USA and Australia were verified using the microsatellite (MS) marker and single nucleotide polymorphism (SNP) methods. Samples were collected from 19 supermarkets located in the city of Seoul and Gyeonggi province, South Korea, from 2009 to 2011. As a result, we obtained a 100% concordance rate between the MS and SNP methods for identifying Hanwoo and non-Hanwoo beef. The MS method presented a 95% higher individual discriminating value for Hanwoo (97.8%) than for non-Hanwoo (61.7%) beef. For further comparison of the MS and SNP methods, blood samples were collected and tested from 54 Hanwoo ${\times}$ Holstein crossbred cattle (first, second, and third generations). By using the SNP and MS methods, we correctly identified all of the first-generation crossbred cattle as non-Hanwoo; in addition, among the second and third generation crossbreds, the ratio identified as Hanwoo was 20% and 10%, respectively. The MS method used in our study provides more information, but requires sophisticated techniques during each experimental process. By contrast, the SNP method is simple and has a lower error rate. Our results suggest that the MS and SNP methods are useful for discriminating Hanwoo from non-Hanwoo breeds.

• The Korean Journal of Pain
• /
• 제25권2호
• /
• pp.99-104
• /
• 2012

Background: Previous studies have shown that if performed without radiographic guidance, the loss of resistance (LOR) technique can result in inaccurate needle placement in up to 30% of lumbar epidural blocks. To date, no study has shown the efficacy of measuring the depth of the posterior complex (ligamentum flavum, epidural space, and posterior dura) ultrasonographically to distinguish true and false LOR. Methods: 40 cervical epidural blocks were performed using the LOR technique and confirmed by epidurograms. Transverse ultrasound images of the C6/7 area were taken before each cervical epidural block, and the distances from the skin to the posterior complex, transverse process, and supraspinous ligament were measured on each ultrasound view. The number of LOR attempts was counted, and the depth of each LOR was measured with a standard ruler. Correlation of false and true positive LOR depth with ultrasonographically measured depth was also statistically analyzed. Results: 76.5% of all cases (26 out of 34) showed false positive LOR. Concordance correlation coefficients between the measured distances on ultrasound (skin to ligamentum flavum) and actual needle depth were 0.8285 on true LOR. Depth of the true positive LOR correlated with height and weight, with a mean of $5.64{\pm}1.06cm$, while the mean depth of the false positive LOR was $4.08{\pm}1.00cm$. Conclusions: Ultrasonographic measurement of the ligamentum flavum depth (or posterior complex) preceding cervical epidural block is beneficial in excluding false LOR and increasing success rates of cervical epidural blocks.

• Safety and Health at Work
• /
• 제10권1호
• /
• pp.114-121
• /
• 2019

Background: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. Methods: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. Results: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. Conclusion: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

• 대순사상과 동아시아종교
• /
• 제1권1호
• /
• pp.127-151
• /
• 2021

The core tenets of Daesoon Jinrihoe in Jeungsanism are encapsulated in the teachings of Eumyang-hapdeok (陰陽合德, Virtuous Concordance of Yin and Yang), Shinin-johwa (神人調化, Harmonious Union between Divine Beings and Human Beings), Haewon-sangsaeng (解寃相生, Resolution of Grievances for Mutual Beneficence) and Dotongjingyeong (道通眞境, Perfected Unification with Dao). Among them, the first three teachings eventually turn towards the prophetic thought of Dotong-jingyeong, which is the process of man becoming a divine figure. While these principles are considered crucial advice for overcoming an unstable life, there are many curious questions that help for better comprehension. What is the reality of Jin-gyeong (眞境) for their followers? How can one reach the ultimate stage under this belief system? Is this ideological concept different from similar perspectives of other major religions? How is this concept related to the idea of Jisang-cheonguk (地上天國, earthly paradise)? This paper analyses these issues of Jin-gyeong from the historical and social narratives of Haengnok (行錄, Acts), Gongsa (公事, Reordering Works), Gyoun (敎運, Progress of the Order), Gyobeop (敎法, Dharma), Gwonji (權智, Authority and Foreknowledge) and Yesi (豫示, Prophetic Elucidations) in The canonical scripture of Jeon-gyeong and also from the ontological approaches of East Asian faiths in order to identify alternative notions of Daesoon cosmology. The paper, based on the sayings of Kang Jeungsan, particularly his philosophy of the Later World, argues the insight that the Jin-gyeong world can be interpreted as created through the Cheonji-gongsa (天地公事, Reordering Works of Heaven and Earth) project in terms of Gaebyeok (開闢, Great Opening) and the earthly paradise as open only for those who achieve the condition of Sin-ingan (新人間, literally means 'new humans' but symbolizing 'being a human-god') by the personal cultivation of Dotong (道通, the unity with Dao).

• 한국조리학회지
• /
• 제22권4호
• /
• pp.288-301
• /
• 2016

본 연구에서는 건강 음료로써 식초 음료 시장의 확대에 기여하고자 전문가들을 대상으로 설문하여 델파이와 AHP를 적용하여 식초 음료의 주된 요소들을 유형화, 계층화하였다. 따라서 문헌 연구와 전문가들의 브레인 스토밍을 통해 상위 개념인 원료, 생산방법, 제품특징, 기능성, 패키지 디자인의 5가지에 대해 개방형 설문으로 1차 델파이를 실시하였는데, 그 결과 하위 개념 50개를 도출하였고, 상위 개념으로 마케팅 1개를 추가하였다. 이렇게 1차 델파이에서 도출된 50개의 개념을 폐쇄형 설문으로 2차, 3차 델파이를 실시하였고, 의견의 일치성을 객관적으로 파악하고자 켄달의 W 검증을 실시한 결과, 2차 델파이에서는 11개 항목이 제거되었고, 3차 델파이에서는 16개 항목이 제거되어 총 23개 문항을 도출하였다. 마지막으로 델파이를 통해 도출된 23개 문항의 상대적 중요도를 파악하고자 쌍대 비교를 실시하여 각 항목 간 우선순위를 도출하여 식초 음료의 품질 평가 시, 중요하게 고려해야할 항목을 구성하였다.