• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.33-42
• /
• 2007

This research proposes strategies about providing detour route information and traffic management for flood disasters. Suggested strategies are based on prevention and preparation concepts including prediction, optimization, and simulation in order to minimize damage. Specifically, this study shows the possibility that average travel speed is increased by proper signal progression during downpours or heavy snowfalls. In addition, in order to protect the drivers and vehicles from dangerous situations, this study proposes a route guidance strategy based on variational inequalities such as flooding. However, other roads can have traffic congestion by the suggested strategies. Thus, this study also shows the possibility to solve traffic congestion of other roads in networks with emergency signal modes.

• Journal of Korea Water Resources Association
• /
• v.38 no.9 s.158
• /
• pp.713-725
• /
• 2005

The objective of this study is to evaluate the applicability and simulation capability of PRMS, developed by U.S. Geological Survey, over the seven multi-purpose dam watersheds in Korea. The basic concepts of model components and their parameters are investigated for the evaluation of model applicability and the possibility of model parameter estimation is suggested based on the data availibility. For model parameter estimation, some parameters are directly estimated from measurable basin characteristics, but the others are estimated by Rosenbrock's automatic optimization scheme. The results show that the simulated flows from the model were very close to the observed ones. Although the default values for snowmelt model parameter are used, the results from snowmelt simulation is also acceptable. The model shows that the simulation capability is not sensitive to the basin size, however, according to increasing basin area, simulation characteristics are close to those for lumped model rather than semi-distributed model.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.148-155
• /
• 2009

In this paper, we analysed what effect the design variables, such as refractive index, central thickness and radius of curvature, had on the first order properties and image quality of optical systems when temperature changed. The optical parameters were varied at each temperature, then the coupling and ruler methods were used to design an athermalized lens for a phone camera. This concept was first used to design the lens for a 1/3.2" 5M phone camera. The designed lens satisfies all the specifications for a phone camera, and the variations of the back focal length(${\Delta}BFL$) are reduced to $10{\mu}m$ for a temperature range of $-10^{\circ}C$ to $+60^{\circ}C$. Also, the TTL of 5.5 mm results in a compact system. All design concepts and results discussed in this paper are expected to be useful in development for the phone and CCTV camera.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.131-137
• /
• 1998

This paper discusses definition, concepts, approach methods, application areas, and evaluation of avoided generation costs based on the Korea's official long-term generation expansion plan. The main objective to evaluate avoided costs of resources is to supply decision makers with the breakeven costs of the resources. For the evaluation of avoided costs based on the Korea's generation system, we consider a DSM option which has 1,000MW peak savings, load factor with 70 percents, and life-time with 25 years. The DSM resource can save the fuel spending and capacity additions of a electric utility during its life time. The capacity and fuel savings are evaluated from two different cashflows with and without the DSM option, which are supplied with on the basis of the generation system optimization model (WASP-II), independently. The breakeven kWh costs of the DSM option is projected to be 31.3 [won/kWh], which is composed of generation capacity and fuel avoided costs with 15.0[won/kWh] and 16.3[won/kWh], respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.343-349
• /
• 2009

In this paper, it would be shown that individuals can have different responses to the same email based on their preferences through computing the distributions of user clusters' email responses from clustering results based on email users' preference information. This paper presents an approach that incorporates user preferences to construct an anti-spam mail system, which is different from the conventional content-based ones. We consider email category information derived from the email content as well as user preference information. We also build a user preference ontology to formally represent the important concepts and rules derived from a data mining process and then apply a rule optimization procedure to exclude unnecessary rules. Experimental results show that our user preference based system achieves good performance in terms of accuracy, the rules derived from the system and human comprehensibility.

• Journal of Environmental Impact Assessment
• /
• v.2 no.1
• /
• pp.39-55
• /
• 1993

The importance of urban and regional natural park increases because of the needs for preserving the natural resources and providing with natural recreation space in nature. This planning of natural park management should be established based on the research of the various natural resources in the park. But for the lack of effective data synthesizing methods and concepts, only some restricted factors for zoning plan are considered even though GIS computer system for large complex simulation is used. Therefore, in this study three ecological zoning models such as Basic Factor Model (BFM), Visual Landscape Model (VLM) and Comprehensive Ecological Model (CEM) are proposed and applied to Byounsan Peninsula Nature Park(BPNP) for comparison with the current natural park zoning. The BFM has three components -elevation, slope and vegetation. The VLM has applied with six components -elevation, slope, vegetation, road type, and the visual distance. Finally the CEM's modelling factors have included all of BFM, VLM components are added with the land use type, nature and historic resource factors. The zoning concept of BPNP was based on "Minimization" focused on the specific factors. But introduced modelling concept is "Optimization" based on the total ecological environment. So the result of the modelling has larger area for preservation and development zoning compared with the current zoning whose characteristics are ambiguous which allows the environmental destruction. The future study issues will be the determination of the weighting factor, component reconsideration based on the ground truth data and the agriculture residential area zoning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.267-276
• /
• 2009

Nowadays, numerous of valuable internet services are available not only for personal computer but also for mobile appliances in wireless network environment. Therefore, as the amount of contents is increased for those services, the storage limitation on mobile devices has became a significant issue. In this paper, we present a new block-level storage network protocol, iATA (Internet Advanced Technology Attachment) as a solution to the above problem. iATA is designed to transport ATA block-level data and command over the ubiquitous TCP/IP network. With iATA, a mobile appliance is able to access and control the ATA storage devices natively through network from anywhere and at anytime as if the storage devices is attached locally. We describe the concepts, design and diverse consideration of iATA protocol. Based on the benchmark experiments and application exploitation, we strongly believe that iATA as a light-weight protocol is efficient and cost-effective to be used as a storage network protocol on a resource limited device that utilizes common-off-the-shelf storage hardware and existing IP infrastructure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2277-2298
• /
• 2019

Adaptive learning in e-learning has garnered researchers' interest. In it, learning resources could be recommended automatically to achieve a personalized learning experience. There are various ways to realize it. One of the realistic ways is adaptive learning path recommendation, in which learning resources are provided according to learners' requirements. This paper summarizes existing works and proposes an innovative approach. Firstly, a learner-centred concept map is created using graph theory based on the features of the learners and concepts. Then, the approach generates a linear concept sequence from the concept map using the proposed traversal algorithm. Finally, Learning Objects (LOs), which are the smallest concrete units that make up a learning path, are organized based on the concept sequences. In order to realize this step, we model it as a multi-objective combinatorial optimization problem, and an improved immune algorithm (IIA) is proposed to solve it. In the experimental stage, a series of simulated experiments are conducted on nine datasets with different levels of complexity. The results show that the proposed algorithm increases the computational efficiency and effectiveness. Moreover, an empirical study is carried out to validate the proposed approach from a pedagogical view. Compared with a self-selection based approach and the other evolutionary algorithm based approaches, the proposed approach produces better outcomes in terms of learners' homework, final exam grades and satisfaction.

• Smart Structures and Systems
• /
• v.23 no.4
• /
• pp.329-335
• /
• 2019

Structural fuses are made up from oriented steel plates to be used to resist seismic force with shear loading resistance capabilities. The damage and excessive inelastic deformations are concentrated in structural fuses to avoid any issues for the rest of the surrounding elements. Recently developed fuse plates are designed with engineered cutouts leaving flexural or shear links with controlled yielding features. A promising type of link is proposed to align better bending strength along the length of the link with the demand moment diagram is a butterfly-shaped link. Previously, the design methodologies are purely based on the flexural stresses, or shear stresses only, which overestimate the dampers capability for resisting against the applied loadings. This study is specifically focused on the optimized design methodologies for commonly used butterfly-shaped dampers. Numerous studies have shown that the stresses are not uniformly distributed along the length of the dampers; hence, the design methodology and the effective implementation of the steel need revisions and improvements. In this study, the effect of shear and flexural stresses on the behavior of butterfly-shaped links are computationally investigated. The mathematical models based on von-Mises yielding criteria are initially developed and the optimized design methodology is proposed based on the yielding criterion. The optimized design is refined and investigated with the aid of computational investigations in the next step. The proposed design methodology meets the needs of optimized design concepts for butterfly-shaped dampers considering the uniform stress distribution and efficient use of steel.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.47-54
• /
• 2020

North Korea has recently developed and deployed missiles with various ranges as asymmetrical forces. Among them, short-range ballistic missiles with improved accuracy are expected to aim at achieving tactical goals by hitting important military facilities in Korea with a small number of missiles. Damage to the air force airfields, one of North Korea's main targets of missiles attack, could limit the operation of air force fighters essential to gaining air superiority. Based on the attack by the short range ballistic missiles, the damage probability of military airfields was simulated. And as the one of the concepts of passive defense, the way to reduce the loss of combat power was studied through the changes of the air force squadrons deployment. As a result, the effective deployment plan could be obtained to reduce the amount of power loss compared to the current deployment.