• 한국항해항만학회지
• /
• 제34권9호
• /
• pp.699-704
• /
• 2010

Recently, the navigation risk is increasing significantly with growing of vessels' volume and propelling marine facilities, water bridges and port development etc. As a result, Ministry of Land, Transport and Maritime Affairs enacted a new law called MSA(Maritime Safety Audit) as a comprehensive maritime traffic safety management scheme in order to ensure safety improvements from the early planning stage to post managing of the development which affect the maritime traffic environment. MSA as a tool for improving maritime traffic safety is a formal safety diagnosis assessment in the existing or future ship's fairway by an independent audit institute. It examines the potential hazards of maritime traffic safety about the port development, if necessary, and is to ensure the implementation of appropriate safety measures. The primary purpose of MSA is to identify potential risk elements affecting safe navigation. This paper is aimed to introduce the backgrounds, the necessity and efficiency of MSA and also to describe some technical standards and diagnostic procedures.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3324-3335
• /
• 2022

Several countries show interest in the Generation-IV power reactor innovative small module (PRISM), including: Canada, Japan, Korea, Saudi Arabia and the United Kingdom. Generation IV International Forum (GIF) has recommended the utilizing of probabilistic safety assessment (PSA) in evaluating the safety of Generation-IV reactors. This paper reviews the PSA performed for PRISM using SAPHIRE 7.27 code. This work shows that the core damage frequency (CDF) of PRISM for a single module is estimated by 8.5E-8/year which is lower than the Generation-IV target that is 1E-6 core damage per year. The social risk of PRISM (likelihood of latent cancer fatality) with evacuation is estimated by 9.0E-12/year which is much lower than the basic safety objective (BSO) that is 1E-7/year. The social risk without evacuation is estimated by 1.2E- 11/year which is also much lower than the BSO. For the individual risk (likelihood of prompt fatality), it is concluded that it can be considered negligible with evacuation (1.0E-13/year). Assuming no evacuation, the individual risk is 2.7E-10/year which is again much lower than the BSO. In comparison with other PSAs performed for similar sodium fast reactors (SFRs), it shows that PRISM concept has the lowest CDF.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.309-314
• /
• 2007

Recently, the LRFD and the PSF based on structural reliability assessment have been applied to NPP designs in behalf of the conventional deterministic design methods. In the risk-informed structural integrity, it is especially possible to optimize design procedures considering cost, manufacturing and maintenance because the structural reliability concepts have confirmed the reliability for which a designer aims. Generally, in order to evaluate the PSF, the LRFD which is the design concept for evaluating safety factors respectively on the limit state function including load and resistance. This study certifies the concept and its applications of the PSF using the LRFD based on the structural reliability engineering.

• 한국수자원학회논문집
• /
• 제57권1호
• /
• pp.21-33
• /
• 2024

최근 기후변화로 영향으로 재해의 양상이 다양화 및 대형화되고 있다. 이에 우리나라는 안전한 치수계획을 세우기 위해 수자원장기종합계획에서 홍수위험도 평가를 위해 홍수피해잠재능(Potential Flood Damage, PFD)의 개념이 도입되었다. 하지만, PFD의 문제점이 제기되면서 다양한 연구들이 진행되어왔다. 선행연구 대부분 PFD 인자를 수정·보완하거나 인자를 새로 추가하는 연구들이 진행되었다. 본 연구는 위험성 인자를 내포하고 있는 홍수위험지도를 사용하여 기존의 치수안전도 평가방법을 개선하고, 대상지역인 영·섬진강권역을 중심으로 평가하고자 한다. 본 연구에서 제시한 평가방법은 위험성 요소 및 잠재성 요소 분석, PFD 및 홍수방어수준 분석, 치수안전도 평가로 크게 3가지로 제시하였다. 본 연구에서 제시한 개선된 평가방법은 각종 치수안전도 평가 및 치수계획 수립시 활용될 것으로 기대된다.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.141-158
• /
• 2019

Objectives: An adverse outcome pathway is a biological pathway that disturbs homeostasis and causes toxicity. It is a conceptual framework for organizing existing biological knowledge and consists of the molecular initiating event, key event, and adverse output. The AOP concept provides intuitive risk identification that can be helpful in evaluating the carcinogenicity of chemicals and in the prevention of cancer through the assessment of chemical carcinogenicity predictions. Methods: We reviewed various papers and books related to the application of AOPs for the prevention of occupational cancer. We mainly used the internet to search for the necessary research data and information, such as via Google scholar(http://scholar.google.com), ScienceDirect(www.sciencedirect.com), Scopus(www.scopus. com), NDSL(http: //www.ndsl.kr/index.do) and PubMed(http://www.ncbi.nlm.nih.gov/pubmed). The key terms searched were "adverse outcome pathway," "toxicology," "risk assessment," "human exposure," "worker," "nanoparticle," "applications," and "occupational safety and health," among others. Results: Since it focused on the current state of AOP for the prediction of toxicity from chemical exposure at work and prospects for industrial health in the context of the AOP concept, respiratory and nanomaterial hazard assessments. AOP provides an intuitive understanding of the toxicity of chemicals as a conceptual means, and it works toward accurately predicting chemical toxicity. The AOP technique has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment. AOP can be applied to the assessment of chemical carcinogenicity along with efforts to understand the effects of chronic toxic chemicals in workplaces. Based on these predictive tools, it could be possible to bring about a breakthrough in the prevention of occupational and environmental cancer. Conclusions: The AOP tool has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment and has been widely used in the field of chemical risk assessment and the evaluation of carcinogenicity at work. It will be a useful tool for prediction, and it is possible that it can help bring about a breakthrough in the prevention of occupational and environmental cancer.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.350-358
• /
• 2022

Objectives: For chemical risk assessment in workplaces, it is necessary to determine a reference value through hazard assessment. In general, OEL (Occupational Exposure Limit) is used for this value. However, since chemicals with OEL were not enough, the concept of DNEL (Derived No Effect Level) was introduced in chemical safety assessment. In this study, the possibility and approach of applying DNEL for chemical risk assessment in domestic workplaces were investigated. Methods: The characteristics of OEL and DNEL were investigated. In addition, ACGIH TLV and GESTIS DNEL were compared and the corresponding scopes were analyzed among the chemical substances notified in South Korea. Results: OEL and DNEL are similar concepts reflecting reference values that should not be exposed based on health effects. While their evaluation and derivation are determined based on similar information and procedures, they may vary depending on the responsible actor, data availability, principles of judgment, and more. As a result of the comparative analysis of ACGIH TLV and GESTIS DNEL, it was confirmed that there is some correlation between TWA and DNEL. The conservatism of DNEL was around 50%. Additionally, it was found that the available range of DNEL among chemicals in South Korea is considerable. Conclusions: This study showed that DNEL can be applied when assessing the risk of chemical substances in domestic workplaces considering several regards. However, since this is not the same level as OEL, we have proposed a proper approach to carry out risk assessment step by step.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.17-32
• /
• 2014

The trade-off studies in the concept development stage to assess the relative goodness of alternative systems concepts for AE (architect engineering) design for the Barge Mounted SMR (BMSMR) is introduced. With respect to design margin, system performance, schedule and risk, the design selection is cond ucted using the following characteristics; barge mobility, system safety under the natural disaster (seismic), power output, interfacing with the other system, and the additional supporting functions as desalination. There are three findings that should be remedied; deficiencies in the assumed characteristics of the system being modeled, deficiencies in the test model, and excessively stringent system requirements. This study is performed using systems engineering approach with trade off matrix method. In order to execute this work, concept development stage is divided into three (3) phases as NA (needs analysis), CE (concept exploration), and CD (concept definition).

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 춘계학술발표회
• /
• pp.17-22
• /
• 2003

With the terrorist attacks on 11 September 2001, the ships and their crews' safety and security have become a major issue in the maritime industries. In high-risk terrorism. not only ship owners and port authorities but also crew members on board should take precautions in the conduct of their business. In this paper, the vulnerability and essential elements in overall security of merchant ship are analyzed with a discussion in depth of the concept and principles of maritime security management. Author proposes ship's security model to reduce security risk and to minimize damage as a basic study for designing security system for merchant ship.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.7-12
• /
• 2016

This study first focuses on the quantitative evaluation of both compulsory and voluntary safety certification of industrial machines and devices. Based on the results of statistical analysis, effectiveness of those safety certifications were confirmed. In order to reduce both the frequency and the strength of industrial accidents associated with industrial machines and devices, major target of safety regulations needs to be shifted from users to manufacturers. Adjustment of industrial machines and devices which are subject to compulsory safety certification and implementation of risk assessment are further suggested. As for the voluntary certification, reestablishment of the concept of voluntary safety certification and balance between compulsory and voluntary certifications is discussed. Voluntary safety certification is further suggested as a mean to manage safety of industrial machines and devices which are not subject to any safety regulations.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.82-88
• /
• 2014

Recently, the concepts of community adaptation and ability to restore have been emphasized in order to evaluate disaster vulnerability and risk exposure level. In particular, the concept of disaster management that voluntarily takes measures prior to disaster situations has been introduced based on participatory disaster management that the community should take responsibility for one's own safety. This study diagnosed the community response capability on four model areas such as Goseong-gun and Gimhae-si, Gyeongsangnam-do and Gimcheon-si and Bonghwa-gun, Gyeongsangbuk-do and represented the Community Preparedness Indicator(CPI) for each region as a result.