• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.663-668
• /
• 2003

In this paper, an environmental factor and a durability resistance factor which adapts the concept of the Load Resistance Factor Design for safety design of RC structures is derived and a basic principle of a durability evaluation for RC structures using the factors is proposed. It is shown that durability of RC structures can be evaluated by comparing predicted value of chloride ion concentration with limit value of concentration for steel corrosion generation in reinforcement steel position and the durability of concrete manufactured for the RC structures can be also evaluated by comparing characteristic diffusion coefficient of concrete with predicted diffusion coefficient during mixture design.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1211-1224
• /
• 2004

Two round jets. impinged and pulsed. were measured with high-resolution 3D-PTV technique. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. Two fitness functions were introduced in a genetic algorithm in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The velocity profiles of the impinged jet obtained by the constructed 3D-PTV system were compared with those of LDV measurements made in this study. The head vortex of the jet was visualized by LIF and was reconstructed by the constructed high-resolution 3D-PTV system for comparisons.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.35-40
• /
• 2015

Electrospinning method has easy preparation of nanofibers with a simple and versatile technique. Electrospun nanofiber is widely used by the simple approach and have great potentials in the numerous applicaitons of medicine, photonics, catalysts, sensors, etc. including advantage of their specific characteristics such as large surface to volume ratio. This paper focused on the fabrication of cobalt electrospun nanofibrer for applications such as electronic, optical and mechanical devices by metal based material. We fabricated cobalt nanofibers on aluminum foil by an electrospinning method. The electrospinning process was performed at a high voltage, 8 kV. The distance between the needle tip and the solution surface in the bath was 5 cm. The PVB - cobalt based nitrate solution was filled in a 10 mL syringe connected to a 22 gauge needle. We confirmed electrospun cobalt nanofiber after annealing process by SIMS (Secondary Ion Mass Spectrometry) analysis. The concept design, fabrication and results of mapping measurements are reported.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.51-54
• /
• 2003

We investigated the quench characteristics of thin film type SFCLs with shunt layers of various thickness. The SFCLs ware based on 2 inch diameter YBa$_2$Cu$_3$O$_{7}$ thin films coated in-situ with a gold shunt layer. The shunt layer thickness was varied by Ar ion milling. The limiters were tested with simulated fault currents at various source voltages. The thinner the shunt layer was, the slower was the rise of SFCL temperatures. This means SFCLs of thinner shunt layers had higher voltage ratings. The voltage rating was approximately inversely proportional to the square root of the shunt layer thickness. This result could be understood through the concept of heat balance.e.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.242-245
• /
• 2003

We investigated the quench characteristics of thin film type SFCLs with shunt layers of various thickness. The SFCLs ware based on 2 inch diameter YBa$_2$Cu$_3$3O$_{7}$ thin films coated in-situ with a gold shunt layer. The shunt layer thickness was varied by Ar ion milling. The limiters were tested with simulated fault currents at various source voltages. The thinner the shunt layer was, the slower was the rise of SFCL temperatures. This means SFCLs of thinner shunt layers had higher voltage ratings. The voltage rating was approximately inversely proportional to the square root of the shunt layer thickness. This result could be understood through the concept of heat balance.e.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.791-795
• /
• 2004

The binding of cethyl trimethylammonium bromide, (CTAB) with human serum albumin (HSA) has been investigated at 5 mM phosphate buffer pH 7.0, 27 $^{\circ}C$ and various ionic strength using ion selective membrane electrodes. This method is faster and much more accurate than equilibrium dialysis technique, so provides sufficient and accurate data for binding data analysis. A novel and simple method was introduced for resolution and characterization of binding sets on basis of binding capacity concept. The values of Hill binding parameters were estimated for each set and used for calculation of intrinsic binding affinity. The results interpreted on basis of nature of forces which interfered in the interaction and represent the existence of three and two binding sets for binding of CTAB at $10^{-4}$ and $10^{-3}$ M of NaBr, respectively.

• Nuclear Engineering and Technology
• /
• v.38 no.8
• /
• pp.793-802
• /
• 2006

The design concept of a bending magnet to be installed in the KSTAR NBI system is presented. It is the function of a bending magnet that removes unconverted ions from the main beam stream and produces an 8 MW, 120 keV deuterium neutral beam. In order to determine the proper size and shape of the bending magnet, a parametric study on the B-field pattern was carried out by changing the dimensions of the pole face model. In addition, the detailed trajectories of the dominant ion species produced in the beam line were calculated. The electrical and cooling parameters of the coil assembly were also estimated.

• Annual Conference on Human and Language Technology
• /
• 2006.10e
• /
• pp.205-212
• /
• 2006

본 연구에서는 추상적 사고를 가능하게 해주는 개념은유 표현의 서술어를 분석하여, 추상개념의 근원영역을 찾는 알고리즘을 HowNet 지식 시스템을 이용하여 제안하고자 한다. 실제로 추상개념 '문화' 가 쓰인 242개의 은유 표현 용례 문장을 가지고 제안된 알고리즘으로 근원영역을 찾고. 이를 토대로. 목표영역 '문화' 의 근원영역이 추론기에 의하여 자동적으로 추론되는 HowNet 기반 은유 온톨로지의 구축 방안을 제시하고자 한다. 또한, 한국어 '문화' 와 영어표현 'Culture'의 근원영역 비교를 통하여 구축된 온톨로지를 영어 번역 및 작문에 어떻게 활용할 수 있는지 보이고자 한다.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.43-44
• /
• 2002

A pulsed jet was measured with high-definition 3D-PTV technique. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. Two fitness functions were introduced in a genetic algorithm in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The head vortex of the jet was visualized by LIF and was reconstructed by the constructed high-resolution 30-PTV system for comparisons.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.63-69
• /
• 1996

As the significance of quality in the sense of customer satisfaction is growing, the management of quality becomes one of the main interests in the manufacturing systems research. This paper presents the concept of quality-driven CIM(Computer Integrated Manufacturing) system which is composed of a business process domain and a quality domain. In the business process domain, business functions are integrated by conventional design and manufacturing databases on the one hand, and an integrated quality system is interlinked to them via several quality modules on the other hand. Quality information model connects the business process domain with the quality domain where various types of quality data are stored in the form of quality database. This framework helps a manufacturing enterprise to implement the quality-driven CIM system to achieve its final objective "customer satisfaction".ion".uot;.