• Journal of Pharmaceutical Investigation
• /
• v.33 no.1
• /
• pp.15-19
• /
• 2003

The rheological behavior of poloxamer 407 solution as function of concentration and temperature was evaluated by rotational viscometer. The viscosity of poloxamer 407 solution was increased as the concentration of poloxamer 407 and temperature increased. At $4^{\circ}C$, poloxamer 407 solution showed the Newtonian flow characteristics regardless of concentration. Upon increasing temperature the poloxamer solution changed to the pseudoplastic flow pattern. And at gelation temperature, rheological profiles showed the abrupt increase in viscosity. Gelation temperature was decreased as the concentration of poloxamer 407 increased, while it increased as the concentration of poly(ethylene glycol) 4000 increased. Poly(ethylene glycol) might be expected to reduce the driving force for hydrophobic interaction resulting in slow gelation. From the viscoelastic properties of poloxamer gel system, we obtained the storage and loss modulus depending on the shear stress and frequency. And the sol-gel transition temperature was also obtained from the viscoelastic properties of poloxamer 407 gel.

• Coupled systems mechanics
• /
• v.7 no.1
• /
• pp.61-77
• /
• 2018

This paper establish a high concentration ratio approximation of linear elastic properties of materials with periodic microstructure with cubic inclusions. The approximation is derived using first few terms of power series expansion of the solution of the equivalent eigenstrain problem with a homogeneous eigenstrain approximation. Viability of the approximation at high concentration ratios is proved by comparison with a numerical solution of the homogenization problem. To this end some theoretical result of symmetry properties of the homogenization problem are given. Using these results efficient numerical computation on a reduced computational domain is presented.

• Journal of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.124-127
• /
• 1965

The surface tension of the solution of dodecylpridinium bromide was measured by the ring method over the range $25^{\circ}\; to\; 45^{\circ}C.$ The critical micelle concentration was determined from the change of the surface tension of solution with concentration. The temperature dependence of the critical micelle concentration was also investigated. The result was compared with Adderson and Taylor's data determined by the conductivity method.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.206-212
• /
• 1998

The water permeation in protective coatings, which may greatly influence the corrosion protective property of these coatings, was studied using the electrochemical impedance spectroscopy technique. During the absorption of water in protective coatings immersed in electrolyte solution, the change of coating capacitance with concentration of electrolyte was determined from impedance measurements. When water absorption or desorption of coatings occured by exposing the coatings to electrolyte solutions of different concentration, increase in impedance caused by desorption of water was found to be higher in the case of thicker film. The amount of water absorbed in coatings changed with concentration of electrolyte. The water taken up in coatings from the solution of lower electrolyte concentration was deserted by contact with the solution of higher concentration. The uptake of water in protective coatings varied depending on the type of coating ingredient especially binder.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2006

It was examined in this study that magnetic beads, which are assumed to be environmentally functional, could be effective in processing heavy metals that are water pollutants. For the purpose, magnetic beads containing carboxyl groups, which has strong binding force with heavy metals, are mixed with each Cd, Pb, Ni, Cu and Cr(III) solution, then stirred in pH 6. As a results of the process, it was proven that heavy metals bind quickly with magnetic beads through the reaction. In order to analyze heavy metal concentration, magnetic beads bind with heavy metal were collected by external magnetic force and dissolved in acid. The graphite furnace AAS was used to get heavy metal concentration melted in the acid solution. The results showed that heavy metal extractions by magnetic beads were influenced by the type and the concentration of a heavy metal, and over 90% of a heavy metal can be extracted in ppm level save for Cr(III). It was also examined in the study whether heavy metal extraction is influenced when other ions exist in each heavy metal solution. According to experiment, adding other heavy metals to a solution did have little influence on extracting an intended heavy metal. But in case salt or heavy metal chelate was added, Ni extraction changed sensitively although extracting other heavy metals were influenced only when the concentration of an added substance is high. In conclusion, it was shown that magnetic beads could be used to treat wastewater with relatively high heavy metal concentration.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.2
• /
• pp.204-208
• /
• 1999

In order to obtain data for use of algin in drink making process solution properties of algin have been investigated at various condition of algin concentration temperature pH and various food additives. At same revolution velosity viscosities of algin were increased as algin concentration raised. Algin solution showed dilatnat type flow in concentration of 0.25% to 0.4% but pseudoplastic type flow in above 0.5% showed dilatant type flow in concentration of 0.25% to 0.4% but pseudoplastic type folw in above 0.5% A maximum viscosity of algin was observed at pH 5.5 and its viscosities were also decreased as the tem-perature increased and heating at 8$0^{\circ}C$ above. Organic acids affected on the viscosity of algin with pH dependently and gel formed in pH below 3.0 Sweetners have no effect to the viscosity of algin. How-ever addition of NaCl and KCL upto 1.0% decreased a little its viscosity and CACl2 MgCl2 and FeCl3 increased the viscosity of algin Glutamic acid decreased the viscosity of algin.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.418-421
• /
• 2003

Surfactant enhanced in-situ soil flushing was peformed to remediate the soil and groundwater at an oil contaminated site, and the effluent solution was treated by the chemical treatment process including DAF(Dissolved Air Flotation). A section from the contaminated site(4.5m$\times$4.5m$\times$6.0m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average Hydraulic conductivity of 2.0$\times$10$^{-4}$ cm/sec. Two percent of sorbitan monooleate(POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminant section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed by GC(gas-chromatography) for TPH concentration with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit(WWDL). Total 18.5kg of oil (TPH) was removed from the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. Results suggest that in-situ soil flushing and chemical treatment process including DAF could be a successful process to remediate contaminated sites distributed in Korea.

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.357-362
• /
• 2001

A bench type ammonia-water absorber heat exchange cycle was tested by varying the system charging concentration, refrigerating valve opening and weak solution flow rate. It was observed that the cooling capacity was increased as the system charging concentration was increased. Optimum system charging concentration was found for the coolong capacity of the system. The opening rate of refrigerant expansion valve had a direct influence on the refrigerant sub-cooling at the condenser outlet. Optimum sub-cooling was found to be 0~4$^{\circ}C$. As the weak solution flow rate increased the concentration of strong solution and the evaporating pressure decreased. There existed a optimum weak solution flow rate which maximized the cooling capacity and COP.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.277-291
• /
• 2013

The transport and recovery of Levafix brilliant red E-4BA and Levafix brilliant red E-6BA were investigated using polytetrafluoroethylene (PTFE) fiber based supported liquid membrane containing tetra butyl ammonium bromide (TBAB) in coconut oil as a carrier. The influencing parameters studied are: pH of the feed solution, concentration of dye in the feed solution, extractant concentration, and various kind of stripping agent, rate of stirring, time of transport, reusability of membrane and stability of membrane. Increase in TBAB concentration inside the membrane enhances the flux with its maximum value at $1.553{\times}10^{-4}$ M TBAB. Further increase in the concentration of TBAB leads to decreased rate of transport due to increase in viscosity of membrane liquid. The optimum conditions for dye transport are: pH of feed ($7{\pm}0.1$), $1.553{\times}10^{-4}$ M extractant concentration, 350 rpm for stirring, $4.9{\times}10^{-1}$ M potassium hydrogen phthalate as a stripping solution, the time of transport 6 h. It was noticed that flux values were increased with increasing dye concentration in the feed phase. Applying this study to textile wastewater, dyes were transported up to 98% in 6 h. This recovery technique is rewarding to environment and economic.