• Journal of Korea Foundry Society
• /
• v.12 no.3
• /
• pp.220-229
• /
• 1992

The degree of purification and the macrostructure of high purity aluminium were studied through the alternate stirring method in order to improve the nonuniformity of solute concentration in the unidirectional stirring method. The $2^3$ factorial design was done to examine the effects of experimental factors more qualitatively. In the relatively low stirring speed of 1500 rpm with alternate stirring mode, the uniform solute profile and refined grain structure were obtained due to strong washing effect and turbulent fluid flow. It was induced by the transition of the momentum boundary layer by alternation of the stirrer. It was concluded from this study that the alternate stirring mode was more effective to obtain the uniformity of solute even in the stirring speed of 1500 rpm. But the degree of purification decreased below the critical alternating period. When 2N(99.8wt.%) aluminium was used as the starting material the morphology of solid-liquid showed the cellular shape and the columnar grains were inclined to the direction of rotation. This inclined grain growth resulted from the difference of relative velocities of solid and liquid. The inclined angle was increased as the stirring speed increased and solidification proceeded. In the case of 4N aluminium, there was no inclined grain growth and it was confirmed from the macrostructure and SEM work that the morphology of solid-liquid interface was planar. From the factorial design, it was found that the alternate stirring mode showed poorer purification effect than that of unidirectional stirring mode at low speed(500 rpm). In addition, the factor that had the most significant effect on the degree of purification was the stirring speed.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.356-361
• /
• 2013

Lead (II) ion selective poly(aniline) solid contact electrode based on Tetramethylthiuram monosulfide ionophore as a sulfur containing sensing material is successfully developed. The electrode exhibits good linear response of 25.6 mV / decade (at $20{\pm}0.2^{\circ}C$, r2=0.995) within the concentration range of $1.0{\times}10^{-1}{\sim}4.0{\times}10^{-7}$ M Pb (II). The composition of this electrode was Ionophore : PVC : dioctylphthalate : potassiumtetrakis(4-chlorophenyl)borate : Oleic acid = 5.0 : 20.0 : 25.0 : 4.0 : 5.0. When we consider the results of using different composition electrodes based on only one potassiumtetrakis(4-chlorophenyl)borate or Oleic acid liphophlic additive, poly(aniline) solid contact electrode based on Tetramethylthiuram monosulfide ionophore with potassiumtetrakis(4-chlorophenyl)borate and Oleic acid liphophlic additive had the best result in response characteristics. The electrode shows good selectivity for lead (II) ion in comparison with alkali, alkaline earth, transition and heavy metal ions. This electrode is suitable for use with aqueous solutions of pH 3.0 ~ 7.0 and their standard deviation in the measured emf differences was ${\pm}2.94$ mV at Tris buffered lead sample solution of $1.0{\times}10^{-2}$ M and ${\pm}2.82$ mV at Tris buffered lead sample solution of $1.0{\times}10^{-3}$ M. Their stabilization time was less than 710 s. and response time was less than 16 s.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.219-223
• /
• 1998

Spectroscopic properties of $Eu^{3+}$, $Sm^{3+}$, $Tb^{3+}$ ions in silicate glasses have been studied. The absorption and emission properties were investigated with the wavelength and rare-earth element concentration. The results showed that the emission spectrum of $Sm^{3+}$ was a transition from $^{5}D_{o}$ excited level to ^{7}F$ ground state and $Sm^{3+}$ was from $4F_{5/2}$ to $^{6}H$ and $Tb^{3+}$ was from $^{5}D_{4}$ to ^{7}F$ The emission intensity was linearly increased with rare-earth element concentrations up to 10wt%.

• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.305-315
• /
• 2006

In order to examine the transition of zooplankton community by the Saemangeum sea dyke, the temporal and spatial distribution of zooplankton community with relation to environmental variables was investigated using data collected in 2004 and 2005. Sixty-one zooplankton taxa were identified. Average abundance (except Noctiluca scintiliam) ranged from 236 to 1810 indiv. $m^{-3}$, and was the highest in May 2005 and the lowest in february 2005. Dominant species were Acartia hongi and Paracalanus indicus, and cirripedia nauplii and zoea were dominant groups. After the closure of the 4th sea dyke, brackish species such as Tortanus derjugini and Pseudodiaptomus inopinus are widely distributed while the abundance of N. scintillans decreased in the northern area inside the dyke. In canonical correspondence analysis (CCA) for examining the relationships among zooplankton, stations and environmental variables, the northern area inside the dyke was distinguished from the other areas and was represented by Acartia spp, and brackish copepods.; Also, this area was characterized by high chlorophyll a concentration and COD, and low diversity.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.478-481
• /
• 1997

A technique or the preparation of porous polyurethane vascular prostheses was investigated. Small-diameter vessels are not in general clinical use due to their limited long-term biocompatibility and low patency rates in experimental trial. These limits are mainly due to the failure of mechanical unction of the vascular grafts. This failure has been suggested to result partially from compliance mismatch. The long-term patency is considered to depend critically on the properties of the material and the fabrication process of the graft. So the control of pores is very important and main points to develop a available vascular grafts. Two-kind polymer sheets was compared. One was the porous PU-sheet made at room temperature by the solvent/non-solvent exchange. And the other was the porous PU-sheet which was fabricated by thermal phase transition and solvent-/non-solvent exchange using the thermal controller. The polymer sheets had a uniform pore size and pore occupation. According to the result of the above experiments, polyurethane solution was injected into a mold designed or U-type tube. The average pore size and pore occupation were easily changed by changing polyurethane concentration, freezing temperature, and methods. This technique can give a proper pore size ($10{\sim}45\;{\mu}m$) or tissue in growth, and suitable compliances or matching with arteries and veins. Besides, the fabrication of more complicated shaped vessels such as the U-type vascular grafts is easily controlled by using the fixed mold. this method might give a desired compliant graft or artificial implantation with the presently valid medical polymers.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.5
• /
• pp.585-595
• /
• 2018

Amitriptyline, a tricyclic antidepressant, is commonly used to treat depression and neuropathic pain, but its mechanism is still unclear. We tested the effect of amitriptyline on 5-hydroxytryptamine 3 ($5-HT_3$) receptor currents and studied its blocking mechanism because the clinical applications of amitriptyline overlapped with $5-HT_3$ receptor therapeutic potentials. Using a whole-cell voltage clamp method, we recorded the currents of the $5-HT_3$ receptor when 5-HT was applied alone or co-applied with amitriptyline in cultured NCB-20 neuroblastoma cells known to express $5-HT_3$ receptors. To elucidate the mechanism of amitriptyline, we simulated the $5-HT_3$ receptor currents using Berkeley $Madonna^{(R)}$ software and calculated the rate constants of the agonist binding and receptor transition steps. The $5-HT_3$ receptor currents were inhibited by amitriptyline in a concentration-dependent, voltage-independent manner, and a competitive mode. Amitriptyline accelerated the desensitization of the $5-HT_3$ receptor. When amitriptyline was applied before 5-HT treatment, the currents rose slowly until the end of 5-HT treatment. When amitriptyline was co-applied with 5-HT, currents rose and decayed rapidly. Peak current amplitudes were decreased in both applications. All macroscopic currents recorded in whole cell voltage clamping experiments were reproduced by simulation and the changes of rate constants by amitriptyline were correlated with macroscopic current recording data. These results suggest that amitriptyline blocks the $5-HT_3$ receptor by close and open state blocking mechanisms, in a competitive manner. We could expand an understanding of pharmacological mechanisms of amitriptyline related to the modulation of a $5-HT_3$ receptor, a potential target of neurologic and psychiatric diseases through this study.

• Plant Biotechnology Reports
• /
• v.4 no.4
• /
• pp.269-280
• /
• 2010

Lilium ${\times}$ formolongi was genetically engineered by Agrobacterium-mediated transformation with the plasmid pCrtZW-N8idi-crtEBIY, which contains seven enzyme genes under the regulation of the CaMV 35S promoter. In the transformants, ketocarotenoids were detected in both calli and leaves, which showed a strong orange color. In transgenic calli, the total amount of carotenoids [133.3 ${\mu}g/g$ fresh weight (FW)] was 26.1-fold higher than in wild-type calli. The chlorophyll content and photosynthetic efficiency in transgenic orange plantlets were significantly lowered; however, after several months of subculture, they had turned into plantlets with green leaves that showed significant increases in chlorophyll and photosynthetic efficiency. The total carotenoid contents in leaves of transgenic orange and green plantlets were quantified at 102.9 and 135.2 ${\mu}g/g$ FW, respectively, corresponding to 5.6- and 7.4-fold increases over the levels in the wild-type. Ketocarotenoids such as echinenone, canthaxanthin, 3'-hydroxyechinenone, 3-hydroxyechinenone, and astaxanthin were detected in both transgenic calli and orange leaves. A significant change in the type and composition of ketocarotenoids was observed during the transition from orange transgenic plantlets to green plantlets. Although 3'-hydroxyechinenone, 3-hydroxyechinenone, astaxanthin, and adonirubin were absent, and echinenone and canthaxanthin were present at lower levels, interestingly, the upregulation of carotenoid biosynthesis led to an increase in the total carotenoid concentration (+31.4%) in leaves of the transgenic green plantlets.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.111-116
• /
• 1992

ZnS:Sm, F TFEL devices with double insulating layer are prepared by e-beam evaporation method. Electroluminescence and luminous efficiency of the device fabricated at various conditions are investigated. The main transitions on the emission spectra for ZnS:Sm, F TFEL device occur at$^4G_{5/2}\to^6H_{9/2}^4G_{5/2}\to^6H_{7/2}, \;^4G_{5/2}\to^6H_{5/2}\to$.Among them, the dominant spectral line and its corresponding transition occur at $^4G_{5/2}\to^6H_{9/2}$(650 nm) and results in an orange-red emission color. The optimum concentration and substrate temperature for the ZnS:Sm, F TFEL device are around 1 wt% and $200^{\circ}C$. Luminous efficiency for the device is the largest at optimum condition.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.259-262
• /
• 1999

The copper-catalyzed reaction of silicon with methanol was carried out in a mixed bed reactor to obtain tetramethyl orthosilicate (TMOS). In order to determine the kinetics of the reaction per active site on the silicon surface, a flow rate transition technique was employed. A kinetic study showed the reaction was in Linear relationship with the amount of contact mass and independent on the concentration of methanol. This result indicated that the rate-determining step was not the chemical process involving methanol, but the formation of silicon intermediate on the contact mass. On the basis of optimum experimental conditions, the maximum TMOS formation rate per g-silicon is 0.030 (g/min) at $210^{\circ}C$, in which activation energy was 8.5 kcal/mol and reaction rate equation was $k=4.09{\times}10^4\;exp$ ($-4.73{\times}10^3/T$).

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.379-385
• /
• 1991

Morphological changes of starch granules from 12 different varieties of rice were examined by scanning electron microscopy during heating at 2.5% (w/v) concentration. Rice starch granules proceeded through a similar pattern of progressive morphological changes daring heating, regardless of variety. Rice starch granules began to swell radially in the initial stage of gelatinization and then undergo radial contraction and random tangential expansion to form complex structures in the latter stage of gelatinization temperature range. At higher temperatures, starch granules softened and melted into thin flat discs, and then stretched into thin filaments to form three-dimensional networks. These progressive morphological changes were reflected in the changes of swelling power, solubility and amylograph viscosity of starch. During the transition of melting or softening, swelling power, solubility and amylograph viscosity increased rapidly. The time of loss of granular structure of starch depended on gelatinization temperature range. The ratio of amylose to amylopectin was largely responsible fur the rate of melting or softening and the fineness of a three-dimensional filamentous network above the gelatinization temperature range. Therefore, both the gelatinization temperature range and amylose content of starch affect the rate of cooking, and amylose content of starch affects the final texture of cooked starch paste.