• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.396-408
• /
• 2007

Natural disasters occurred in Inje and Pyeongchang in 2006 show that unusual changes of weather, which Korean Peninsula has not experienced before, are becoming quite common phenomenon nowadays. In future we have to proceed in the direction of preventing such disasters so as to minimize the damage, by analyzing character and cause of various disasters whenever necessary, performing modeling in simulated real world, and applying the results in disaster prevention policy next year. Applying GIS in this process, the best information for decision-making can be offered. This study has also progressed proceeding from such point of view. The results of this study show that local concentrated heavy rain, caused by the primary topographical factor in the Sulak mountain region, was the main cause of flood disaster occurred in Inje-Gun area in July of 2006. Local concentrated heavy rain is greatly affected by topography. Namely, if there is a mountainous region behind, the area opposite to the direction of rain clouds motion will have high possibility of local concentrated heavy rain.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.191-198
• /
• 2011

Herbicidal effects and crop selectivity of aqueous leaf extracts of sorghum (Sorghum bicolor L.) were evaluated against several weed species for developing sustainable weed management in organic farming. Aqueous sorghum leaf extracts were highly phytotoxic to different weed species. No broadleaf weeds were germinated in the concentration of 5 fold or higher concentrated sorghum leaf extracts and 90% of seed germination was inhibited within that range in grass species. Sorghum leaf extracts strongly inhibited the growth of different weeds by pre-emergence and foliar applications in greenhouse condition. Foliar application of sorghum leaf extracts had a higher inhibitory effect than the pre-emergence application. Broadleaf weed species were more susceptible than grasses to the application of sorghum leaf extract in foliar applications than grasses. Galium spurium, Erigeron candensis, and Rumex japonicus were completely killed at the highest concentrated sorghum leaf extract both in pre-emergence and foliar application. Most broadleaf weed species were inhibited more than 80% at pre-emergence application at 50 fold concentrated sorghum leaf extract. G. spurium, E. candensis, R. japonicus, Eclipta alba, Plantago asiatica and Portulaca oleraeea were most susceptible to sorghum leaf extract in foliar application. Growth of most broad leaf weed species was suppressed by greater than 90% at 50 fold concentrated sorghum leaf extract. Most crop species were tolerant to sorghum leaf extract but shoot growth was slightly reduced by the application of 40~50 fold concentrated extracts, Sorghum leaf extract may used to control weeds in organic fanning without affecting the growth of crop.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.297-308
• /
• 2007

The granulation equipment of concentrated wastes is manufactured for the polymer solidification of concentrated wastes. It uses liquid sodium silicate as a granulating agent for the granulating of dried powder containing boric acid. The granulating agent is sprayed in the form of droplet and mean size of dried granules is $2{\sim}4mm$. The new technology which has been used for the polymer solidification of spent resin in U.S. and certified by Nuclear Regulatory Commission (NRC) is successfully applied to concentrated wastes. This uses in-situ solidification process within drum without mechanical mixing. Maximum loading of waste can be achieved without increasing of waste volume. Polymer waste forms were evaluated with several test such as fire test, compressive strength test, leaching test, immersion test, irradiation test, and thermal cycling test according to standard test procedures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.643-659
• /
• 1993

This study was performed for the purpose of evaluating the stress distributions around five different types of implants according to their structures. The stress distribution around the surrounding bone was analysed by two-dimensional photoelastic method. Five epoxy resin models were made, and vertical and lateral forces were applied to the models. A circular polariscope was used to record the isochromatic fringes. The results of this study were summerized as follows : 1. Threaded type implants showed more even stress distribution patterns than cylinderical type implants when vertical and lateral forces were applied. 2. The stress concentrated patterns were observed at the neck portion and middle portion of the cylindrical type implants comparing with threaded type implants when vertical force was applied. 3. Model 1 and model 4 which are tthreaded type implants showed similar stress distribution patterns at the middle and apical portions and more stress was concentrated at the neck porion of model 1 comparing with model 4 when vertical force was applied. The stresses around model 1 were more evenly distributed when lateral force was applied. 4. More stress was concentrated at the neck and middle portion of cylindrical type implants than threaded type implants when lateral force was applied. 5. Model 1 showed the most even stress distribution patterns when lateral force was applied and stress distribution did no occured at the apical portion of modedl 2 when lateral force was applied. 6. There were almost no differences in stress concentrated patterns with or without having hollow design. And the stress concentrated patterns were observed at the corner of apex in model 5 which has hollow design when vertical force was applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1311-1320
• /
• 2000

In this study, shape memory alloy(SMA) wires and piezoceramic actuators(PZT's) are employed in order to generate higher modes on the beam deformations. Compressive force is generated and applied to the beam by the pre-strained SMA wires attached at both ends of the beam. PZT's apply concentrated moments to several locations on the beam. Combinations of the compressive force and concentrated moments are investigated in order to understand the higher-mode deformation of beams. The first desired mode shape is obtained by controlling the temperature of the SMA wires. The first and third mode shapes are performed experimentally by heating SMA wires up to phase transformation temperature. The adaptive wing is defined as a wing whose shape parameters such as the camber, wing twist and thickness can be varied in order to change the wing shape for various flight conditions. In this research, control of the camber has been studied. The wing model consists of three plates and many ribs. Two of the plates are placed parallel to each other and they are clamped at one edge. Third plate connects the other edges of the parallel plates together. Each rib is made of SMA wire and connected to the parallel plates. It generates concentrated force and applies to the plates in oblique directions. The PZT's are bonded onto the plates and exert concentrated moments upon the plate at several locations. The object of this research is to generate various shape of wing by combining the concentrated forces and moments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2010

Vitrification technology has been gradually recognized as one of effective solidification methods for concentrated boric acid wastes generated in PWR. Vitrification for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. A feasibility study for the vitrification of concentrated boric acid wastes has been performed with developing the pre-treatment methods of powdered wastes, glass compositions using glass formulation and demonstration test. The pre-treatment method is pelletizing the powder type for stable feeding within cold crucible melter. The glass compositions should be developed considering molten glass are related with wastes reduction. High contents of sodium and boron within borate wastes give influence to waste loading. A variety of factors obtained from the demonstration test are reviewed, which is wastes feeding rate, off-gas characteristics on stack and glass characteristics of final products such as durability for implementing the wastes disposal requirement. The aim of this paper is to present the feasibility of vitrification and review the solidification method for concentrated boric acid wastes and obtain the physicochemical characteristics of solidified glass.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.41-47
• /
• 2011

The volumetric solar receiver is a key element of solar power plants using air. The solar flux distribution inside the receiver should be a priori known for its heat transfer analysis. Previous works have not considered characteristics of the solar flux although they change with radiative properties of receiver materials and receiver geometries. A numerical method, which is based on the Monte Carlo ray-tracing method, was developed in the current work. The solar flux distributions inside multi-channeled volumetric solar receivers were calculated when light is concentrated at the KIER solar furnace. It turned out that 99 percentage of the concentrated solar energy is absorbed within 15mm channel length for the channel radius smaller than 1.5mm. If the concentrated light is assumed to be diffuse, the absorbed solar energy at the channel entrance region is over predicted while the light penetrates more deeply into the channel. Once the presented results are imported into the heat transfer analysis, one could examine effects of material property and geometry of the receiver on air temperature profiles.

• Korean Journal of Food Science and Technology
• /
• v.51 no.1
• /
• pp.7-11
• /
• 2019

Reverse osmosis (RO) was applied to onion juice to produce concentrated onion juice with improved flavor. The volatile compound profiles of concentrated onion juice and onion juice were compared using solvent-assisted flavor evaporation followed by gas chromatography-mass spectrometry. Onion juice and RO-concentrated onion juice contained 48 and 62 distinct volatile compounds, respectively, and included alcohols, aldehydes, esters, terpenes, furans, ketones, acids, hydrocarbons, and sulfur-containing compounds. The RO-concentrated onion juice contained a greater number of volatile flavor compounds than did onion juice. Notably, sulfur-containing compounds, which are characteristic volatile flavor compounds in raw onions, were more abundant in the RO-concentrated onion juice than in onion juice. The volatile compound composition indicates that RO-concentration produces good quality onion juice.

• Korean Journal of Organic Agriculture
• /
• v.18 no.2
• /
• pp.271-282
• /
• 2010

This study was conducted to investigate the effects of concentrated pig slurry and byproduct liquid fertilizer on the growth and yield of chinese cabbage. The experiment was conducted in a rain-shelter house which was installed in the agriculture farm. Plants were fertilized with concentrated slurry (CS), byproduct fertilizer (BF), mixture of concentrated slurry and byproduct liquid fertilizer (CS+BF), combined organic and chemical fertilizer (CS+BF+BF) and chemical fertilizer (CF) as control. 1. The pH level of byproduct liquid was decreased from the 3rd to the 7th day and increased 9 day to 14th day, but pH of concentrated slurry (CS) was not greatly varied. EC of concentrated slurry (CS) and byproduct liquid was increased gradually during the fermentation. 2. The concentrated slurry (CS) was low in phosphorus, calcium, magnesium, rich in potassium and unbalanced as a low nitrogen and high potassium. But byproduct liquid fertilizer was balanced in nitrogen and potassium ratio. 3. The leaf number, head height, head width of chinese cabbage in treatment with organic and chemical fertilizer (CS+BF+N) showed significant difference compared with control. The plant and head weight of chinese cabbage in treatment of concentrated slurry was severely decreased, but that in treatment organic and chemical fertilizer (CS+BF+N) were increased 8, 10% compared with control chemical fertilizer (CF), respectively. 4. The content of $K_2O$ in plant tissue and in soil was increased after using concentrated slurry. On the other hand, mineral content of except $K_2O$ did not differ significantly between any of the treatments. In conclusion, organic and chemical fertilizer (CS+BF+N) could improve growth and head weight of chinese cabbage.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.139-147
• /
• 2014

The paper presents a systematic comparison of four topologies of the interior permanent magnet machine (IPMM) designed for low speed applications. This comparative study investigates the suitability of the concentrated winding and distributed winding in the stator and the flat-shaped or V-shaped magnets in the rotor poles. The paper also studies the inductance characteristics of the designs using finite element analysis. Various steps taken to minimize the cogging torque and torque ripple in the studied machines were also discussed in details.