• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1940-1951
• /
• 1999

In this paper, the equations of motion of a Bernoulli-Euler cantilever beam fixed on a moving cart and carrying a lumped mass concentrated at an arbitrary position along the beam is derived. The motion of the beam-mass-cart system is analyzed through unconstrained modal analysis, and a unified characteristic equation for calculating the natural frequencies of the system is obtained. The changes of natural frequencies and the corresponding mode shapes with respect to the changes in mass ratios of the system and to the concentrated position of the lumped mass are investigated with the frequency equation, which can be generally applied to this kind of systems. The exact and assumed-mode solutions including the dynamics of the base cart are obtained, and the open-loop responses of the system by arbitrarily designed forcing function are given by numerical simulations. The results match well with physical phenomena even at the extreme cases where the concentrated mass is attached to the bottom and to the top of the beam.

• 한국물환경학회지
• /
• 제31권1호
• /
• pp.42-48
• /
• 2015

This study focused on effective decomposition methods for low concentrated organic compounds from the reuse of industrial wastewater, and confirmed the possibility through photocatalyst media. Photocatalyst immobilized media was developed to carry on this experiment which confirmed the removal possibility of low concentrated organic compounds. Considering the stability and efficiency of photocatalyst immobilization, inorganic support, hollow bead, and $TiO_2$ nano powder were used. As a result of the removal experiment, the removal efficiencies of acetonitrile, ethanol, IPA(Isopropyl alcohol), methanol were above 75% after 15 minutes while those of acetone, acetaldehyde, urea were 10%, 45%, 20%, respectively after 60 minutes. If further studies were made to increase the surface area of the photocatalyst immobilized media, the efficiency of the removal of low concentrated organic compounds can be improved and this solution can also be used in an actual treatment process.

• 한국물환경학회지
• /
• 제29권1호
• /
• pp.45-54
• /
• 2013

This study analyzes the reduction effects of runoff and flood damage through different arrangements of stormwater storage facilities. Three scenarios based on the spatial allocation of storage capacity are used: concentrated, decentralized and combinative. The characteristics of runoff and flood damage by scenario are compared. The XP-SWMM model is used for runoff simulation by the probable rainfall of return period. The result shows that the concentrated arrangement of storage facilities is most effective to reduce the amount of peak flow and to delay the time of peak flow. Yet, while the concentrated arrangement is most effective to reduce the inundation damage, it is not effective to reduce runoff volume. The decentralized arrangement is most effective to reduce runoff volume. The combinative arrangement is effective not only the runoff reduction but also the reduction of flood damage. The result indicates that the flood mitigation strategies against heavy rainfall need to consider decentralized on-site arrangement for the reduction of runoff volume along with concentrated off-site arrangement of storage facilities.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.190-194
• /
• 1993

This experiment was conducted to investigate the effects of concentrated sulfate on the germination rate, growth rate and the productivity of weight of kudzu (Pueraria thwnbergiana Bentham). The germination rate of kudzu seed by one or two treatment retreatment with the concentrated sulfate for minutes of 5. 10, 15 and 20 were determined respectively. The results obtained were summarized as follows; 1. In the time of concentrated sulfate treatment, the germination rate was the highest in the once treatment for 20 minute. and the retreatment was higher than the once treatment in the germination rate. 2. The changes of plant length by growth stage was grown gradually until for 60 day and rapidly after for 60 day. The growth rate was the highest in treatment for 15 minute than in other treatments. 3. The stem diameter. stem weight. fresh weight and root weight by the treatment with sulfate 15 minute as the treatment with once were high degree of productivity. 4. The number of branch. number of nodes and root weight by the growth stage were higher growth rate before for 90 day than after for 90 day, however stem weight and fresh weight were high degree of productivity after for 60 day.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.765-766
• /
• 2006

Interior Permanent Magnet Synchronous Motor(IPMSM) have many advantages such as high power density, wide speed range and so on. With the IPMSM, miniaturization and energy efficient design can be achieved in comparison with Surface Permanent Magnet Synchronous Motor(SPMSM). In order to secure miniaturization and manufacturing efficiency of the motor, it has concentrated winding, because concentrated winding can reduce the motor volume and make manufacturing to be simple compared with the distributed winding. However, according to the pole-slot combinations motor parameters can be changed and unexpected normal force can be generated. Especially, unbalanced normal force in airgap can cause serious vibration and acoustic problem. Accordingly, in this paper, normal force and parameters variation of concentrated winding IPMSM are investigated according to the pole-slot combinations.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.323-329
• /
• 1989

본 연구에서는 판이론으로서는 해석이 불가능한 집중하중작용점에서 응력을 해석할 목적으로 3차원탄성이론과 변링포텐셜(POTENTIAL) 이론을 이용하여 유근평판의 집중하중작용점에서의 응력을 해석하는 방법을 제안하고저 한다.

• 한국응용과학기술학회지
• /
• 제14권3호
• /
• pp.29-38
• /
• 1997

Low toxic concentrated oil dispersant using n-Paraffin and Di(ethylene glycol)mono butylether mixed solvent was prepared, and tested by oil dispersant performance test method, and oil dispersant efficiency was measured using vertical shaking method to 3 kinds of Crude oil, Bunker oil and W/O emulsions with different physical properties by appling the prepared dispersant. Although toxicity test was performed with Flat fish and Rock fish by appling the mixed oils emulsified using prepared oil dispersant, couldn't find the toxicity to them. Concentrated oil dispersant prepared has a good dispersion efficiency of 97.2% after 0.5min settling time and 28.3% after 10min settling time to Bunker B oil with 10% water solution. Especially, the concentrated oil dispersant showing the low toxicity to Oryzias Latipes(24hr, TLm) was 54,000 ppm and to Brine Shrimp Artemia(24hr, TLm) was 51,000ppm, and also, it was completely biodegradated to 99.1% after $7{\sim}8$days.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.78-86
• /
• 2020

A stress analysis was performed to verify the stability of the digging part of a garlic harvester. A finite element analysis was performed to examine the distribution and concentrated loads on the digging part of the blade and contact plate. Moreover, the stability and maximum deformation of the digging part were determined. Under a distributed load, the maximum principal stress, total deformation, and minimum safety factor ranged from 64-128 MPa, 0.35-0.70 mm, and 2.9-5.7, respectively. The analysis results for the distribution load indicated that the maximum stress occurred at the center of the blade. In contrast, under the concentrated load, the maximum principal stress, total deformation, and minimum safety factor ranged from 66-247 MPa, 0.35-0.79 mm, 1.48-5.53, respectively. The analysis results for the concentrated load indicated that stress and deformation were larger toward the edge and center, respectively.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.329.2-330
• /
• 2002

This study was intended to establish test methods equivalent to those of "Interferon alfa-2 concentrated solution" monograph in European Pharmacophoeia(EP). Two recombinant interferon alfa concentrated solutions manufactured in Korea were tested according to the monograph of EP. Tests of identification(biological activity. isoelectric focusing. SDS-PAGE under reducing condition, peptide mapping). related proteins. impurities of moducular masses differing from that of interferon alfa-2(SDS-PAGE under reducing and non-reducing condition). bacterial endotoxin, protein, potency, host-cell-derrved proteins. and host-cell-derived DNA were performed in the laboratories of manufacrues and division of biotechnology. KFDA. The results of this study showed that specitications of interfenon alfa concentrated solutions manufactured in Korea were within the aceptance criteria of EP. Based on the study. specitications and test methods for interferon alfa concentrated solution can be established according to the monograph of EP suggesting the revision of Minimum requirements for biological products

• Earthquakes and Structures
• /
• 제26권6호
• /
• pp.489-499
• /
• 2024

Infill masonry walls are vulnerable to lateral loads, including seismic, wind, and concentrated push loads. Various strengthening metal fittings have been proposed to improve lateral load resistance, particularly against seismic loads. This study introduces the use of post-compressed wedges as a novel reinforcement method for infill masonry walls to enhance lateral load resistance. The resistance of the infill masonry wall against lateral-concentrated push loads was assessed using an out-of-plane push-over test on specimens sized 2,300×2,410×190 mm³. The presence or absence of wedges and wedge spacing were set as variables. The push-over test results showed that both the unreinforced specimen and the specimen reinforced with 300 mm spaced wedges toppled, while the specimen reinforced with 100 mm spaced wedges remained upright. Peak loads were measured to be 0.74, 29.77, and 5.88 kN for unreinforced specimens and specimens reinforced with 100 mm and 300 mm spaced wedges, respectively. Notably, a tighter reinforcement spacing yielded a similar strength, as expected, which was attributed to the increased friction force between the masonry wall and steel frame. The W-series specimens exhibited a trend comparable to that of the displacement ductility ratio. Overall, the findings validate that post-compressed wedges improve the out-of-plane strength of infill masonry walls.