• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.416-421
• /
• 2000

Today, manufacturing market is highly competitive due to more complex and variable products, shorter delivery lead times, intensified product development rate, customers's increasing concern about quality, durability, maintainability, safety and environmental performance. To survive this environment, development of the automated design system is needed using AutoCAD. This paper represents a computer aided design system for watergate by using AutoCAD R2000 system and its Visual LISP computer language. The developed system ultimately generates the design for water gate through AutoCAD.

• 한국정밀공학회지
• /
• 제5권3호
• /
• pp.31-42
• /
• 1988

This paper describes a computer aided process planning system called "Deep-Drawing", "Deep-Drawing" is designed for the drawing sequence of cylindrical and rectangular cups with or without taper and flange. The computer program has written in BASIC language with personal computer. Design Rules for process planning are formulated from process limitation, plasticity theory and experimental results including the know-how of many manufacturing factories. "Deep-Drawing" Capabilities include the analysis of drawing sequence by the determination of optimal drawing ratio, the determination of intermediate shape, dimensions, punch and die radius etc., the calculation of drawing loads and blank holder force to perform each drawing step, and the graphic outputs for the operation sheet.tputs for the operation sheet.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.497-498
• /
• 2006

Powder Injection Molding (PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry. With this regards, design technology of dental scaler tip PIM mold, which has complex shape, with the help of computer-aided analysis for powder injection molding process was developed. Compter aided analysis results, such as filling pattern, weldline formation, and air vent position prediction were investigated and eventually showed good agreements with experimental results.

• 소성∙가공
• /
• 제14권6호
• /
• pp.570-576
• /
• 2005

Powder Injection Molding(PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry With this regards, design technology of dental scaler tip PIM mold, which has complex shape and small core pin (diameter=0.6mm), with the help of computer-aided analysis of powder injection molding process was developed. Computer-aided analysis for dental scaler tip mold was implemented by finite element method with non-Newtonian fluid, modified Cross model viscosity, PvT data of powder/binder mixture. Compter-aided analysis results, such as filling pattern, weldline formation, air vent position prediction were compared with experimental result, and eventually have been shown good agreement. The core pin (diameter=0.6mm) deflection analysis of dental scaler tip PIM mold during PIM filling process was also investigated before mold fabrication.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• 대한치과보철학회지
• /
• 제59권4호
• /
• pp.442-450
• /
• 2021

컴퓨터 지원 설계 및 제조 기법(CAD-CAM)은 치과 영역에서 급속도로 발전해온 분야로, 다양한 보철 치료 영역에 적용되고 있다. 이 중 절삭형 방식(Subtractive Manufacturing)으로 분류되는 절삭가공 기법을 이용한 의치 제작은 상용화된 디지털 총의치 제작 방식 중 하나이며, 동시에 첨가형 방식(Additive Manufacturing)으로 분류되는 레이저 소결 혹은 용융 기법을 활용하여 피개의치를 위한 금속구조물을 보다 효율적으로 제작할 수 있게 되었다. 본 증례에서는, CAD-CAM을 통해 절삭형 방식으로 제작한 상악 총의치와 3D 금속 프린팅을 이용한 금속구조물과 절삭형 방식으로 제작된 인공치를 접목한 하악 임플란트 피개의치를 제작하였다. 이를 통해 기능적, 심미적으로 적절한 임상적 결과를 얻었으므로 이를 보고하는 바이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.535-539
• /
• 2001

The aim of this paper presents to develop a computer-aided design system for water gate on AutoCAD R2000system. The developed system has been written in AutoCAD and Visua ILISP with a personal computer, and is composed four modules which are the gate-lifter input module, guide-frame input module, template input module and upgrade module. Based on knowledge-based rules, the system is designed by considering several factors, such as width and height of a water gate, material, object of product and maximum depth of water. Employing the developed system enable the designer and manufactures of water gate to be more efficient in this field, and its potential capability for enhancement included FEM(Finite Element Method) and quotation system.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.51-57
• /
• 1998

In this paper, a computer aided process design technique, utilizing a forging simulator and a commercial CAD software, is presented together with its related design system for cold-former forging of ball joints. The forging sequence design is carried out through user-computer interaction by using design templates, design database, experience or knowledge-based rules and some basic laws found in the literature. The forging simulation technique is used to verify the process design. The detail designs including die set drawings and die manufacturing information are automatically generated. It has been shown that the engineer ing and design productivity is much improved by the presented approach in the practical standpoint of process design engineers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.354-357
• /
• 1996

Virtual Manufacturing System(VMS) is an integrated computer based model which has physical, logical schema and behavior of real manufacturing system. In this paper, an integrated scheduling system is developed to simulate and control a Virtual Factory. A workflow model is constructed to define and analyze the structure of a VMS. On-line dynamic dispatching system is developed using MultiPass algorithm and scheduling system considering dynamic CAPP is carried out. Integrated scheduling system developed in this paper reduces the discrepancies between virtual model and real manufacturing system, and control of real shop floor is possible.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.261-267
• /
• 1991

다품종소량생산의 특징을 갖고 있는 금형공업에서 컴퓨터통합생산시스템(Computer Integrated Manufacturing System;CIMS)의 실현을 위한 중요한 분야의 하나는 부품설계도면으로부터 최종제품을 생산하는데 필요한 공정계획의 자동화, 즉 컴퓨터를 이용하여 공정계획을 자동적으로 생성하는 자동공정계획시스템(Computer Aided Process Planning;CAPP) 기술의 개발이다. 국내외적으로 CAPP분야의 연구는 컴퓨터 지원에 의한 자동화 기술의 급속한 발전과 더불어 지난 20여년 동안에 기계가공품에 관한 CAPP은 약 150여가지가 개발되었으나, 이는 컴퓨터 지원에 의한 설계의 자동화(Computer Aided Design;CAD)나 컴퓨터 지원에 의한 제조의 자동화(Computer Aided Manufacturing;CAM)분야에 비해 상대적으로 저조한 형편이다. 특히 금형을 대상으로 한 CAPP시스템의 개발은 아직 초기단계에 있기 때문에, 본 연구에서는 사출금형을 대상으로 하여 실용성이 있는 공정설계시스템을 개발함을 목적으로 한다. 일반적으로 공정계획은 "소재로부터 제품을 경제적, 효율적으로 생산하는데 필요한 제조공정의 체계적인 결정"이라고 정의할 수 있다. 공정계획은 제품의 종류와 수량, 재료와 부품의 종류, 보유 생산설비와 제조기술의 수준에 따라 다르나, 공정설계(Process Design)와 작업설계(Operation Design)로 구분할 수 있다. 본 연구에서는 공정계획을 광의의 공정설계로 정의하고, 공정설계와 공정계획을 동의어로 통용토록 한다. 기존의 CAPP시스템의 개발에 관한 기본적인 접근방법은 변성형방법(Variant method), 창성형방법(Generative method) 및 자동화방법(Automatic method)이 있다. 이들 CAPP시스템을 개발할 때 사용하는 기법은 크게 5가지- (1) GT(group Technology) 접근기법, (2) Bottom-up 접근기법, (3) Top-down 접근기법, (4) AI와 전문가시스템(Expert System) 접근기법, (5) 컴퓨터 프로그래밍 언어 - 로 분류할 수 있다. 본 연구에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.