• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.161-165
• /
• 2003

In this paper, we investigate the issues on the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the X-Y-Z stage are employed as master controller and slave system respectively. For this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of X-Y-Z stage are presented. In this paper, internet network is used for data communication between master and slave. We construct virtual environment of the real convex surface from the force-feedback in controlling the X-Y-Z stage and measuring the force applied by the 3-DOF haptic device.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• Nuclear Engineering and Technology
• /
• v.15 no.3
• /
• pp.188-196
• /
• 1983

A simplified fast-running system code is developed to simulate loop transients such as pump coastdown, loop failures and natural circulation. Special emphasis is put on the numerical investigation of the natural circulation system with multiloop. For this purpose, 5 governing equations are derived, and they are discretized by the space-time integration technique. The developed computer program is applied to three sample problems; transition from 2-loop to 1-loop operation, transition from 1-loop to 2-loop operation, and the transient behavior with decay power in the case of 2-loop operation.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.236-242
• /
• 1998

This paper presents a development of computer aided cutting tool selection techniques for rough and finish turning operations. The developed system,. which is one of important activities for computer aided operation planning, firstly implements operation sequencing. Then, from relations of the size of machined area, recommended finishing allowance and maximum depth of cut, a main machining method is selected, a number of cut is calculated, cutting tools including toolholders and inserts are selected, and values for cutting parameters are determined. A cutting tool selection procedure is proposed for toolholders and inserts of ISO code in rough cutting, and some important parameters such as holder style, tool approach angle, tool function and its direction are described in detail. In order to demonstrate the validity of the system a case study is performed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.9
• /
• pp.724-732
• /
• 1989

The structure of engine and its interaction are investigated and the construction of mathematical model for the performance evaluation is presented and then simulated. The total system is classified as air-fuel inlet element, intake manifold, combustion, and engine dynamics and their control function are schematically evaluated. Because of the model structure with general engine function and computer simulation of the chosen engine, physical characteristics of the corresponding engine and the engine data of normal operation state are used. According to the study, it is possible to predict the mixture rate by by the difference in the mass of fuel and air into cylinder and to evaluate and trace dynamic characteristic of operation state under various operating condition. The model characteristic under the transient operating condition makes it possible to effectively evaluate the operation of actual engine through the result of simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.16-28
• /
• 2000

In this paper, we implemented by describing a pipeline processor using a HDL in functional level, simulated and verified it's operation. When simulating a implemented processor. We first specify assembly instruction that is Performed in the processor. entered by programming using the instruction sets at the experimental framework. Thus, the procedure that is presented in this paper can easily identify and verify the purpose for implementation and operation of a system by using test vector. Also, it was possible that exactly simulate a system. The method was comfortable that document a system operation to implement.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.91-98
• /
• 2020

In order to prevent a collision accident during sudden braking, we have proposed an hazard lamps automatic operation system that can be easily installed in existing vehicles that do not have hazard lamps automatic operation. There are several ways to recognize sudden braking. Using GPS, the system does not work in a tunnel, and it is difficult to install the system additionally on an existing vehicle using a vehicle speed sensor. Therefore, the proposed system eliminates these problems by using the acceleration sensor and makes it possible to recognize even the sudden turning and bounce of the vehicle.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.689-691
• /
• 2020

현재 국내 모바일 게임 시장은 발전을 거듭하여 게임산업 비중과 매출이 PC온라인 게임 시장을 추월했다. 이로 인해 모바일 게임 시장에 대한 중요성이 부각되었고, 모바일 게임을 운영하기 위한 수단도 중요해졌다. 본 논문에서는 네이버 카페를 통한 모바일 게임 운영의 장점과 단점을 분석하고, 별도의 홈페이지를 통해 모바일 게임 운영을 하고 있는 기업들을 분석한다. 본 논문에서 제시한 해결 방안은 앞으로의 모바일 게임 운영에 활용할 수 있을 것이다.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.666-669
• /
• 2002

A microprocessor with genetic instructions such as crossover, mutation and inversion is proposed. The processor is modeled using VHDL, synthesized to a schematic and implemented on a FPGA. The control path is implemented with a microprogram consisting of about 15032-bit microwords, and the operation of each instruction is checked through simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.1-9
• /
• 2020

In this paper, we propose an efficient adaptive write scheme that improves the performance of write operation in MLC STT-MRAM caches. The key idea of the proposed scheme is to perform the write operation fast if the target MLC STT-MRAM cells contain a dead block. Even if the fast write operation on the MLC STT-MRAM evicts a cache block from the MLC STT-MRAM cells, its performance impact is low if the evicted block is a dead block which is not used in the future. Through experimental evaluation with a memory simulator, we show that the proposed adaptive write scheme improves the performance of the MLC STT-MRAM caches by 17% on average.