• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.681-685
• /
• 2002

초고속 통신망의 발달과 컴퓨터 하드웨어/소프트웨어의 발달은 누구나 쉽게 다양한 멀티미디어 자료를 웹을 통해 접할 수 있게 만들었다. 교육 분야에서도 많은 연구가 진행 되었으며, 웹이 가진 특성인 시간적 문제, 공간적 문제를 해결해 주고 경제 산업적으로 지역, 거리간 불평등을 해소하고 일반 국민들에게 평생교육의 장을 마련할 수 있는, 웹이 가진 특성을 살려 웹에서의 학습 코스웨어를 설계 구현하였다. 본 논문은 WBI(Web Based Instruction) 개발에 관련되는 기법을 바탕으로 컴퓨터 그래픽 강의 시스템을 구현하였다. 이 WBI는 그래픽 프로그램의 하나인 포토샵 6.0 학습을 중심으로 구성하였으며, 이를 통해 교수자와 학습자, 학습자와 학습자간의 상호작용이 원활하고, 다양한 멀티미디어의 활용과 학습자 요구의 교육, 심도 있는 전문화 교육을 할 수 있도록 한다.

• Journal of Multimedia Information System
• /
• v.5 no.3
• /
• pp.179-188
• /
• 2018

In order to overcome the problems of contact palmprint recognition, a non-contact palmprint recognition system is developed on personal computer (PC) platform. Three methods, namely "double-line-single-point" (DLSP), "double-assistant-crosshair" (DAC) and "none-assistant-graphic" (NAG), are implemented for the palmprint localization to solve the severe technical challenges, including the complex background, variant illuminations, uncontrollable locations and gestures of hands. In NAG, hand segmentation and the cropping of region of interest are performed without any assistant graphics. The convex hull contour of hand helps detect the outside contour of little finger as well as the valley bottom between thumb and index finger. The three methods of palmprint localization have good operating efficiency and can meet the performance requirements of real-time system. Furthermore, an attendance system on PC platform is designed and developed based on non-contact palmprint recognition.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2757-2765
• /
• 2000

IMT-2000은 제3세대 이동통신 시스템으로서 육상, 해상, 위성을 포함한 모든 이동통신을 포괄하는 통신서비스를 제공하게 된다. 또한, 기존의 음성 서비스 뿐만 아니라 문자, 이미지, 멀티미디어 정보까지 전송할 수 있으며 국제적인 로밍을 통해 전세계 어느 곳에서도 통신할 수 있는 미래의 이동통신 시스템이다. 본 논문은 IMT-2000 교환기에서의 지능망 서비스 기능 설계 및 구현을 목적으로 한다. 그 내용으로서 지능망 서비스를 제공하기 위한 IMT-2000 교환기의 기능 모델 및 기능 블록간 상호 동작 흐름을 제시한다. 또한 지능망 서비스의 한 예인 UPT 서비스의 호 절차를 설계한다. 이를 기초로, IMT-2000 교환기에서 서비스 교환 기능을 구현하기 위한 SDL 다이어그램, 라이브러리 및 데이터 베이스를 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.305-309
• /
• 1988

Drawing pneumatic circuits by hand and searching for the error when the circuit is not properly constructed are very difficult. In this paper, a graphic simulation program for drawing and evaluating pneumatic circuit systems was developed. The porgram is menu-driven style and pneumatic circuit can be easily drawn by selecting the pneumatic components from the menus. Simulation of the motion of each pneumatic component and testing of whether the circuit is constructed properly are possible with the software. This program was written in Turbo Pascal and also used the Turbo Graphix Toolbox. The system hardware requires IBM PC, XT, AT or compatibles, and Hercules Card.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.5
• /
• pp.9-18
• /
• 1997

The petri net is a graphic model which is adaptable in modeling a complex concurrent parallel ssystem, and it is widely used in the fields of industrial enginering, computer science, electric engineeringand chemistry. Recently, the net is applied to the communication protocol, and extended to represent complex systems. There are several extended petri nets named as TPN (timed petri net), SPN (stochastic petri net), FPN(fuzzy petri net) and TFPN(timed fuzzy petri net). Accodingly, this SPN (stochastic petri net), FPN (fuzzy petri net) and TFPN(timed fuzzy petri net). Accodingly, this paper proposes an advanced communication protocol modeling method using the fuzzy value of the transition and firing delay time as the arguments of the function. The proposed method can produce clearer firing rules, and it is supposed to be used to design and analyse communication protocols in great effection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.848-854
• /
• 1999

In this paper, we designed and implemented a precise pulse motor controller chip that generates the pulse needed to control step motor, DC servo and AC servo motors. This chip generates maximum pulse output rate of 5Mpps and has the quasi-S driving capability and speed and moving distance override capability during driving. We designed this chip with VHDL and executed a logic simulation and synthesis using Synopsys tool. The pre-layout simulation and post-layout simulation was executed by Compass tool. This chip was produced with 100 pins, PQFP package by 0.8${\mu}{\textrm}{m}$ gate array process and implemented by completely digital logic. We developed the test hardware board of performance and the CAMC(Computer Aided Motor Controller) Agent softwate to test the performance of the pulse motor controller chip produced. CAMC Agent enables user to set parameters needed to control motor with easy GUI(Graphic User Interface) environment and to display the output response of motor graphically.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.12-22
• /
• 2001

Vehicle driving simulators hale been used in the development and modification of models. A simulator can reduce cost and time through a variety of driving simulations in the laboratory. Recently, driving simulators have begun to proliferate in the automotive industry and the associated research community. This paper presents the hardware and software developed fur a driving simulator of construction vehicles. This effect involves the real-time dynamic analysis of wheel-type excavator, the design and manufacturing of the Stewart platform, an integrated control system of the platform, and three-dimensional graphic modeling of the driving environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.170-174
• /
• 1990

The information with regard to the working range of lathe, cutting tool, cutting condition is managed as Database system for turning operation as one part of CAM system. Data with regard to the working range of lathe, cutting tool, cutting condition are stored by the DBMS(Data Base Management System) and can be added, modified, deleted and retrieved for realtime usages. Data stored in Database system are searched to select the most proper cutting tool and cutting condition with the input data fed from the design stage. Codes in regards to tool shape are displayed on graphic mode for easy selection for user and thus presents a good decision support for tool selection. The system developed in this work is operated by the pull down menu on the IBM PC/AT personal computer, or compatible series.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.40-45
• /
• 1994

The TCAD(Technology Computer Aided Design) software tool is a popular name to be able to simulate the semiconductor process and device circuit. We have developed a two-dimensional TCAD software tool included an editor, parser, each process unit, and 2D, 3D graphic routine that is Integrated Environment. The initial grid for numerical analysis is automatically generated with the geometric series that use the user default(given) line and position separated with grid interval and the nodes corresponding to each mesh point stoic the all the possible attribute. Also, we made a data structure called PIF for input or output. Methods of ion implantation in this paper arc Monte Carlo, Gaussian Pearson and Dual-Pearson. Analytical model such as Gaussian, Pearson and Dual-Pearson were considered the multilayer structure and two-dimensional tilted implantation. We simuttaneously calculated the continuity equation of impurity and point defect in diffusion simulation. Oxidation process was simulated by analytical ERFC(Complementary Error Function) model for local oxidation.