• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2002년도 창립기념 학술대회
• /
• pp.96-107
• /
• 2002

21세기를 맞이하는 기업은 세계화와 국제화, 정보의 다양화 및 분산화, 제품수명주기의 단축과 수익률의 감소, 고품질의 제품, 지식산업의 등장, 고객 욕구의 증대 등 다양한 내 ${\cdot}$ 외적 환경변화에 대응해야 하고 경쟁우위를 확보하기 위해 끊임없이 기업의 변화능력을 확보해야 한다. 기업은 제품을 생산하여 판매하는 기업의 시스템 전체가 경쟁력을 갖추어 총체적 우위를 확보하고 고객의 기호와 감성에 호소하는 제품을 만들 수 있도록 다양한 정보를 제공하는 시스템을 필요로 하게 되었다. 즉, 시간과 서비스에 뒤진 고객지원체계는 기업의 성장에 절대적인 마이너스 요인이므로 고객 정보의 효율적 관리, 고객 요구에 대한 신속한 대응, 정기적 고객만족도 조사 등 고객이 원하는 것을 재빠르게 얻어낼 수 있는 고객 친밀형 정보시스템의 확립이 요구되는 것이다. 이를 해결해 줄 수 있는 새로운 경영정보시스템이 바로 WebERP인 것이다. WebERP는 기업의 원활한 자재, 구매활동을 위해 제안된 MRP에서 시작되었으며, 생산관리의 개념을 포함하고 있는 MRPII로 확대되었다가 다시 인사나 회계, 재무 등 조직이나 기업의 전업무영역을 수용하는 종합경영정보시스템으로 발전된 것이다. 현재는 전자상거래와 관련하여 WebERP의 필요성이 부각되었고, 모기업과 협력사간의 구매발주 및 납품관리를 확대시켜 소모성자재(MRO: Maintenance, Repair & Operation) 및 기타 공동구매서비스와 유사업종간의 그룹을 형성하여 ASP(Application Service Provider)의 공동 환경을 이용한 WebERP 환경을 이용한 WebERP활용이 현시점으로 적실히 필요한 것이다. 이는 중소기업들의 공동 협업체제를 도모하여 외세를 대비하는 응집력을 확고히 함으로써 집단체제의 e마켓플레이스 확립과 더불어 국제경쟁을 대비한 방안으로서 집단 공동의 웹환경 인프라가 필요한 것이다. 이러한 배경에서 ASP환경을 이용한 WebERP활용방안과 시스템 구축전략을 경남지역의 기계산업정보화사업단이 추진하는 일반기계, 전기기계, 금속기계, 수송기계, 정밀기계의 5개 업종을 4,877개 기업 대상으로 추진하고 있으며, 그 중 WebERP의 모델로서 2003년도까지 50개 기업을 선정하고, 이는 5개 업종 골고루 선정하여 적용과 표준화 모델로 전개해 나가는 것을 정리한 것이다.

• 공학교육연구
• /
• 제3권2호
• /
• pp.3-13
• /
• 2000

본 연구는 컴퓨터 지원하의 품질경영(CAQC)교육에 있어서 발생되는 문제점을 분석하여 정리하고, 사례로서 히스토그램을 중심으로 한 학습모델을 개발하였다. 연구의 범위는 일반적으로 널리 통용되고 있는 히스토그램의 작성방법을 MS-엑셀을 활용하여 계산할 경우에 개선되어야할 문제점과 추가되어야 할 이론을 상호연관성 하에서 단계적으로 진행되도록 한 체계화이다. 히스토그램은 추출한 표본의 분포 형태로부터 모집단을 파악하자는 이론이므로 모집단의 분포의 형태를 추정해내기 위한 방법들을 실험과 실습을 통하여 대안을 제시했다. 히스토그램의 활용성을 확대시켜서 생산현장에서 응용할 수 있도록 정규성 검정에 관한 방법, 공정능력지수의 적용기준, PPM기법의 확률계산 등의 이론을 상호보완적으로 연관시켜 추가하였다. 불량원인을 신속하고 정확하게 찾아서 개선하고 관리하는 방법의 도구로서 히스토그램 본래의 목적에 잘 부합될 수 있도록 CAQC교육의 학습모델을 제안한다.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.479-508
• /
• 1994

This study was designed to investigate the reciprocal movement which was derived form application of active torque in ideal archwire by computer-aided three-dimensional finite element analysis of maxillary teeth and surrounding periodontal ligament composed of 2617 elements and 3725 nodes. Ideal archwire model was also made using the beam elements and the contact between the wire and the bracket slot was made using the gap element. In this study non-linear elastic behaviors of contact between the wire and the bracket slot were considered on. We put the active torque between the lateral and cenral incisor and between the second premolar and the first molar with/without cinch-back. The results were expressed by quantitative and visible ways. The findings of this study were as follows: 1. Reciprocal actions to active torque were complex system consisting of a combination of counter-torque, bucco-lingual linear displacement and tipping, rotation of the teeth, occluso-gingival linear displacement. 2. When active anterior crown labial torque was applied, crown labial tippings of the lateral were the greatest, and those of the central incisor was the next, Crown lingual tippings of the canine and the first premolar, mesial rotations and extrusion of the lateral and distal rotations and intrusion of the canine occurred. When anterior torque with the cinch-back was applied, amount of crown labial tippings of the lateral and central incisor were reduced. Amount of crown lingual tipping of the canine and the first premolar were increased. Mesial tippings and mesial rotations of the second molar occurred. 3. When active posterior crown lingual torque was applied, crown lingual tippings of the first moalr were the greatest, and crown labial tippings of the second premolar and the first premolar were the next, the crown lingual tipping of the second molar were a little. Mesial rotations of the second premolar occurred but those of the first premolar didn't occurred.

• 디자인학연구
• /
• 제20권
• /
• pp.51-58
• /
• 1997

다차원적이며 다속 성을 지니는 디자인 대상에 대하여 통합적으로 자료처리가 진행되고, 가시적인 운용이 더해짐으로서 디자인 과정은 보다 효율적이며, 효과적으로 처리되어 궁긍 적으로 시장경쟁을 가지게 되는 것이다. 본 연구에서는 디자인 제의(컨셉트)의 각 단계와 세부 디자인 완료 후 최종 디자인 결과의 평가를 C/S의 컴퓨팅 환경 아래, 효율적으로 접근시키는데 있으며, 특히 선행연구인 디자인 평가의 방법별 비교연구 결과를 바탕으로 컴퓨터 어플리케이션을 연구/개발하여 실제적인 디자인 평가의 실행기반을 조성하는데 연구의 기본 목적을 둔다. 평가 법 특성 정도에서 평가 법(Ⅹ)는 신속성, 평가 법(Y)는 신뢰성, 평가 법(Z)는 중요성을 두드러지게 보이고 있는 점 또한 이에 대한 주관적인 조사와도 대체로 일치되고 있다. 평가방법 별 상관관계 분석에서는 1차 연구에서 보다 강한 상관계수를 보여 영가 설(nullhypothesis)이 부정되고 연구가설(research hypothesis)이 채택되어 평가 법 간의 정적인 상관관계(positive relation)가 있다고 보여 진다.

• 한국농공학회지
• /
• 제39권5호
• /
• pp.86-96
• /
• 1997

The arrangement of small streams in rural area, in the past times, attached importance to the prevention of flood damage through the straightening and lining of streams. Recently, the way of small stream arrangement is introducing the idea of water friendly environment or friendly space. As a result, there has been much concern with water favorable river management model which may lead to control flood. However, it is very difficult to develop a model applicable to all types of rivers, since each river has different flow velocity, flow amount and unique ecological characteristics. In this study, photo processing technique, one of landscape simulation methods, has been adopted because it helps to visually express and comprehensively evaluate pre and post scenery and easily applicable. Some important guideline and technique for the planning of small stream landscape arrangement are mentioned in this study. The simulation system for acquiring water favorable space and arranging landscapes needs to develop database which can forecast various types of landscape. It may also be used for the bases of planning and designing river environment arrangement. Computer aided image processing system enables to make selective planning in river environment arrangement. It may also enables to develop the methods for river environment development, ecology conservation, and multipurpose space utilization. Moreover, it makes economic river arrangement by applying river environment arrangement methods relevant to geographical characteristics. There are some limitations in this study, such as shortage of exact investigation on the stream direction and velocity in landscape arrangement. Continuous monitoring and research may be required to develop techniques through the application of computer graphics and digital image processing.

• Asia pacific journal of information systems
• /
• 제23권3호
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

• 대한전자공학회논문지SD
• /
• 제49권8호
• /
• pp.47-54
• /
• 2012

본 논문에서는 테라헤르츠 시스템에 적용 가능한 쇼트키 다이오드를 이종 레지스트 패터닝 기술을 이용하여 제작 하였다. 제작된 쇼트키 다이오드는 전자선묘화공정(electron beam lithography)과 포토리소그래피(photolithography)를 사용하여 양극 및 양극 패드의 연결을 동시에 패터닝 하여 공정을 단순화 시켰다. 측정결과 제작된 쇼트키 다이오드의 직렬 저항은 $11.2{\Omega}$, 접합용량은 25.96 fF, 이상 계수(ideality factor)는 1.25를 얻었으며, 차단 주파수는 547.6 GHz를 얻었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.111.1-111.1
• /
• 2010

This paper focuses on a systematic configuration of steam reforming fuel processor, particularly designed for small and medium sized hydrogen production application. In a typical integration of the fuel processor, there exist significant temperature gradients over the entire system which has negative effect on both catalyst life-time and system performance. Also, the volumetric inefficiency should be avoided to obtain the possible compactness for the commercial purpose. In the present work, the computational analysis will be performed to gain the fundamental insight on the transport phenomena and chemical reactions in the reformer consisting of preheating, steam reforming (SR), and water gas shift (WGS) reaction beds in the flow direction. Also, the fuel processing system includes a top-fired burner providing necessary thermal energy for endothermic catalytic reactor. A fully two-dimensional numerical modeling for a integrated fuel processing system is introduced for in-depth analysis of the heat and mass transport phenomena based on surface kinetics and catalytic process. In the model, water gas shift reaction and decomposition reaction were assumed to be at equilibrium. A kinetic model was developed and then computational results were compared with the experimental data available in the literature. Finally, the case study was done by considering the key parameters, i.e. steam to carbon (S/C) ratio and temperature. The computer-aided models developed in this study can be greatly utilized for the design of advanced fast-paced compact fuel processors research.

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.297-305
• /
• 2010

Medical image acquisition techniques such as CT and MRI have disadvantages in that the numerous time and efforts are needed. Furthermore, a great amount of radiation exposure is an inherent proberty of the CT imaging technique, a number of side-effects are expected from such method. To improve such conventional methods, a number of novel methods that can obtain 3D medical images from a few X-ray images, such as algebraic reconstruction technique (ART), have been developed. Such methods deform a generic model of the internal body part and fit them into the X-ray images to obtain the 3D model; the initial shape, therefore, affects the entire fitting process in a great deal. From this fact, we propose a novel method that can generate a 3D vertebraic generic model based on the statistical database of CT scans in this study. Moreover, we also discuss a method to generate patient-tailored generic model using the facts obtained from the statistical analysis. To do so, the mesh topologies of CT-scanned 3D vertebra models are modified to be identical to each other, and the database is constructed based on them. Furthermore, from the results of a statistical analysis on the database, the tendency of shape distribution is characterized, and the modeling parameters are extracted. By using these modeling parameters for generating the patient-tailored generic model, the computational speed and accuracy of ART can greatly be improved. Furthermore, although this study only includes an application to the C1 (Atlas) vertebra, the entire framework of our method can be applied to other body parts generally. Therefore, it is expected that the proposed method can benefit the various medical imaging applications.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권3호
• /
• pp.13-17
• /
• 2003

현대 병원들은 보다 나은 의료서비스를 위해 디지털 시스템을 갖추고자 노력하고 있다. 하지만, 아직도 많은 부분은 아날로그 시스템과 Film 출력에 의존하고 있다. 본 연구는 차량 이동형 흉부 전용 간접 촬영기에 디지털 영상 변환 장치와 이에 연동되는 X-ray 발생장치의 제어 시스템, 출력 시스템을 디지털시스템으로 변환, 연동시켰으며, 획득한 영상을 간접 촬영 전용프로그램에서 편리하게 판독 할 수 있도록 설계하여 임상에 적용시켰다. 이러한 과정에서 발생되는 문제점을 현실적으로 해결하였으며, 방사선사 입장에서 업무의 효율성을 높이고자 몇 가지 프로그램을 개발 적용하였다. 향후 미래지향적인 디지털의료 영상 시스템을 갖추기 위해 각종 프로그램과 시스템과도 연동이 되도록 설계하여 임상에 적용하여 우수성을 입증하였다.