• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.126-132
• /
• 2005

In this paper, an auto-design system is introduced for a stamping tool based on commercial computer aided design system with its drafting language. The auto-design system consists of tool oriented product design subsystem which modifies and configures the product drawing, tool concept design subsystem which make a design of the punches and their punching progression and parts design subsystem that makes automatic dimension. The system is applied to the mechanical design of the stamping tool. The main logic of the system is based on half-edge theory, a kernel for the 3 dimensional CAD system, which is applied to 2 dimensional drafting auto-design system. The auto-design system enables to conspicuously reducing the designing time of the tool. In addition, there is little drafting error that had been about 3% without auto design program. It is effective to reduce the development time for new products because of rapid designing time of the tools, standardization of the stamping tool and the drafting rule for the auto-design system. The auto-design system yields high efficiency of the tool manufacturing system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.90-98
• /
• 2005

HMT is a type of continuously variable transmission which has split power flow path characteristics with gear train and hydro static unit. The benefit of improved fuel economy and high power capacity enables it to be a promising application fur large vehicles. This paper presents the analysis results including velocity, static torque, transmission efficiency and dynamic model of the HMT that is developed for city buses. The speeds or gear shafts, the static clutch torque and split power ratio for each mode are detailed here. From the analysis of HMT transmission efficiency considering the power loss in meshed gear and hydraulic unit, we can conclude that minimization of hydraulic power is necessary for improved fuel economy design. Also, the dynamic simulation result for mode shift characteristics shows that little shift shock is observed because of the synchronized rotation speed in clutch.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.5-14
• /
• 2007

It is necessary for development of drawing product with press to have suitable material selection & all process design and the problem during press process has been cleared from judgement of experience & trial and error. Recently we can estimate press process result from computer aided design & FEM. But we can get more reliable result when we can put more precise process variants during FEM. In case of using a drawbead that is used for the material inflow, it is considered for us to put material property, other analysis condition & friction figure when material is passing through the drawbead for better FEM. From our study, we have drawn an analogy bead connection depth, friction figure & drawing and restraining load according to kinds of lubrication from experiment & FEM for the drawbead. We applied above result to the drawing experiment & FEM and confirmed the validity. We could notice the relation between friction figure & drawing load and the friction figure variation according to kinds of lubrication. It is expected to draw more precise analogy that can be used for real process due to more precise process variants application to FEM.

• Laser Solutions
• /
• v.15 no.2
• /
• pp.15-20
• /
• 2012

A novel joining technology was developed to compensate the camber in polymers. The preheating laser beam circulates on the joining location and the accumulated heat serves to increase the flexibility of neighboring polymers. The temperature rises up to the glass transient temperature of the polymers and continually loading spring force closes the gap of camber. The irradiated laser was 808nm central wavelength and the power varied between 2Watt and 5Watt. The laps were adjusted between 3 and 10 and the optimum process parameters were 3Watt and 5 laps for the specific application. An FEM analysis was introduced to understand the mechanism of joining by the transient temperature distribution on the polymers. Thermocouples experiments were also tried to correlate the numerical analysis results and it showed the trend of heat accumulation in experiments.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.155-161
• /
• 1989

Generally cam-follower systems consist of two elements: Cam is for rotating motion and follower for reciprocating motion. Depending on the shape of cam and type of follower, the motion of cam-follower system is determined. Thus design process and analysis process must be well defined. The design process means to find the coordinates of cam shape which can be defined the given motion of follower and the analysis process means to determine the motion curve of follower corresponding to the given cam based on the dimensions of a cam-follower system. This paper consists of two parts : One is for development of a numerical method for design and analysis of cam-follower systems, the other is for development of a CAD program and its application. As the second part of the paper, the structure of a CAD program is introduced. Four data files are used in the program where the design process and the analysis process are carried out interactively to en hence its availability to the industrial applications. The first part of the paper 'presents the iterative contact method which can determine the contact points and their angles between cam and roller.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.1079-1084
• /
• 2002

Systems engineering technology development program for Korea next-generation high-speed railway(KNHR) system in progress is a national large-scale system development program that is not only a large-size and complex but also multi-disciplinary in nature. Using the RDD-IOO, a systems engineering tool, the KNHR program can establish requirements traceability and development process management in the course of development. This paper presents the results from a computer-aided systems engineering application to KNHR system technology development project over the three years of activities. The traceability among the system design database in the vertical direction of SE process, as the results of the first year and the second year research was accomplished. The database in both the requirement management domain and the project management domain was developed and set up the traceability between them in the horizontal direction of the SE process in the V model as the results of the third year research. Therefore, KNHR design database was built to support the life-cycle management of the system as well as to reuse the knowledge in future programs. In the following development phase, this database will be utilized to accomplish the test and integration activities providing a baseline database. The outcome of the study contributes to the establishment of the model-based systems engineering approach as a best practice in the accumulation and advancement of systems engineering technology for railway system development.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.92-98
• /
• 2012

This study shows details of a specific space truss frame structure devised to carry out maintenance and repair temporary works in tunnels. The purpose of this study is to verify structural safety and function of the innovative truss structure through an analysis tool, i.e.. ABAQUS, which is a suite of software application for finite element analysis and computer aided engineering. And then optimized size, i.e., thickness and diameter of truss members is evaluated in practice. In this study, construction methods in the temporary works are additionally represented by using the new space truss frame structure.

• Journal of Korea Foundry Society
• /
• v.31 no.4
• /
• pp.218-223
• /
• 2011

Computer Aided Engineering (CAE) is very helpful field for every manufacturing industry including foundry. It covers CAD, CAM, and simulation technology also, and becomes as common sense in developing new products and processes. In South Korea, more than 600 foundries exist, and their average employee number is less than 40. Moreover, average age of them becomes higher. To break out these situations of foundry, software tools can be effective, and many commercial software tools had already been introduced. But their high costs and risks of investment act as difficulties in introducing the software tools to SMEs (Small and Medium size Enterprise). So we had developed cloud computing platform to propagate the CAE technologies to foundries. It includes HPC (High Performance Computing), platforms and software. So that users can try, enjoy, and utilize CAE software at cyber space without any investment. In addition, we also developed platform APIs (Application Programming Interface) to import not only our own CAE codes but also 3rd-party's packages to our cloud-computing platforms. As a result, CAE developers can upload their products on cloud platforms and distribute them through internet.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.173-181
• /
• 1996

In this paper, we studied the modeling methods of initial ship structure design results using ship structure product model for concurrent engineering in shipbuilding industry. We suggested two modeling methods which are programming method using CAD commands and Macros for primary structure members. Also, we investigated three modeling procedures which are modeling procedure in unit concept, modeling procedure using version control, and modeling procedure for computer aided process planning. We demonstrated how to use the structure product modeling results in some application fields. Finally, we proposed some ideas for future research.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.250-257
• /
• 2004

Typical railway systems are composed of the various sub-systems, such as tracks, structures, electricity supplying systems, signal systems and vehicles. The roles of the sub-systems are clarified in the railway regulations in terms of their whole life cycle, as like design, operation and disposal stages. The regulations express clearly the basic specifications and requirements that need to accomplish their own performance and also state the standards and procedures for the normal operations and emergency conditions. In this paper the current railway regulation systems are analyzed and average revision periods are presented as the results of the analysis on revision history of railway safety regulations. This paper also presents the requirements for national safety standards based on Railway Safety Act and the necessity of application of system computer aided system engineering (CASE) tool for the improvement of legislation tasks. By exemplifying the cases of high speed rail system and Japanese cases that had developed softwares for supporing regulation revision management, the methodologies was studied for reconstruction of railway safety regulation system. As the results, it was presented such as the considerations for actual implementation and systematic safety regulation revision.