• 제목/요약/키워드: Computational Vibration Analysis

검색결과 573건 처리시간 0.031초

고속철도 판토그래프의 공력소음 기여도 연구 (Prediction of the Aerodynamic Noise Generated by Pantograph on High Speed Trains)

  • 한재현;김태민;김정태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 춘계학술대회 논문집
    • /
    • pp.425-431
    • /
    • 2013
  • Nowadays, high speed train has settled down as a fast and convenient environment-friendly transportation and it's need is gradually increasing. However increased train speed leads to increased aerodynamic noise, which causes critically affects comfortability of passengers. Especially, the pantograph of high speed train is protruded out of train body, which is the main factor for increased aerodynamic noise. Since aerodynamic noise caused pantograph should be measured in high speed, it is difficult to measure it and to analysis aerodynamic noise characteristics due to the various types of pantograph. In this research, aerodynamic noise of pantograph is predicted by CFD (Computational Fluid Dynamic) and FW-H (Ffowcs Williams-Hawkings) equation. Also, Wind tunnel test results and numerical simulation results were compared. As a result, Simulation results predicting sound pressure level is very similar with wind tunnel test result. To analyze contribution of the pantograph to the noise of high-speed train, simulation results compared with measurement results of exterior noise. The simulation reuslts found that pantograph is a dominant noise source of high-speed trains's exterior noise in low frequency section. This dominant noise was come out from vortex shedding of the panhead in the pantograph. This research will be utilized for reduce sound pressure level of pantograph.

  • PDF

신경회로망 모델을 이용한 철도 현가장치 설계변수 최적화 (Optimization of Design Variables of Suspension for Train using Neural Network Model)

  • 김영국;박찬경;황희수;박태원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.1086-1092
    • /
    • 2002
  • Computer simulation is essential to design the suspension elements of railway vehicle. By computer simulation, engineers can assess the feasibility of a given design factors and change them to get a better design. But if one wishes to perform complex analysis on the simulation, such as railway vehicle dynamic, the computational time can become overwhelming. Therefore, many researchers have used a mega model that has a regression model made by sampling data through simulation. In this paper, the neural network is used a mega model that have twenty-nine design variables and forty-six responses. After this mega model is constructed, multi-objective optimal solutions are achieved by using the differential evolution. This paper shows that this optimization method using the neural network and the differential evolution is a very efficient tool to solve the complex optimization problem.

  • PDF

원거리 음성 인식을 위한 효율적인 에코제거 시스템 (Efficient Acoustic Echo Cancellation System for Distant-Talking Automatic Speech Recognition)

  • 김기범;김상윤;이우정;권민석;고병섭
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.150-155
    • /
    • 2014
  • 본 논문에서는, 원거리 음성인식을 위한 서브밴드 필터링 기반의 빠르고 효율적인 에코제거 시스템을 제안한다. 제안하는 에코제거 시스템은 우선 채널간 유사도 (correlation) 가 높을 경우 적응필터가 오작동하는 것을 방지하기 위해 spatial decorrelation 을 적용하게 된다. 그리고 tree 형태를 가지는 IIR filterbank 기반의 subband 구조를 채택함으로써, 적은 차수로도 효과적인 analysis, synthesis 필터링을 수행할 수 있도록 한다. 이 과정에서 불가피하게 발생하는 서브 밴드간 spectral aliasing은 notch filter를 적용해 해결할 수 있다. 또한 적응 필터로는 improved proportionate normalized least-mean-square (IP-NLMS) 알고리즘을 사용해 수렴속도 및 에코제거 성능에서 우수함을 확인하였다. 마지막으로 decision-directed estimation 기반의 residual echo suppressor를 적용해 잔여 에코를 제거하게 된다. 본 논문에서는 각 단계를 구성하게 된 이론적인 배경을 소개하고, 실제 에코가 존재하는 환경에서 ERLE, 원거리 음성 인식률, computational complexity를 통해 제안하는 에코제거 시스템의 효과를 입증하도록 한다.

  • PDF

배기계 디커플러의 음향 특성에 관한 연구 (A Study on the Acoustical Characteristics of Exhaust Decoupler)

  • 허덕재;임종윤
    • 한국자동차공학회논문집
    • /
    • 제14권5호
    • /
    • pp.93-99
    • /
    • 2006
  • Flexible couplers are widely used for exhaust transmitted vibration reduction in vehicles. This paper describes an investigation into the acoustical characteristics of exhaust flexible coupler by the simulation and testing. Computational acoustic simulation is carrying out to investigate resonance frequency and transmission loss of decoupler using the boundary element method and transfer matrix approach. To confirm the acoustical simulation results of exhaust decoupler, we compare with measured experimental results by the test of transmission loss measurement system. In the comparison with simulation results and tests results, there is correctly fit the resonance frequency and the trend of transmission loss. Also, we show that the acoustical structure of decoupler is analogous to the expended tube or side branch resonator. The characteristics of exhaust decoupler have a marked increase in the acoustic attenuation at the specified frequency bend. Therefore the decoupler is applied to develop the exhaust system not only for the vibration isolator but also for the noise attenuator.

Control effect and mechanism investigation on the horizontal flow-isolating plate for PI shaped bridge decks' VIV stability

  • Li, Ke;Qian, Guowei;Ge, Yaojun;Zhao, Lin;Di, Jin
    • Wind and Structures
    • /
    • 제28권2호
    • /
    • pp.99-110
    • /
    • 2019
  • Vortex-Induced-Vibration (VIV) is one kind of the wind-induced vibrations, which may occur in the construction and operation period of bridges. This phenomenon can bring negative effects to the traffic safety or can cause bridge fatigue damage and should be eliminated or controlled within safe amplitudes.In the current VIV studies, one available mitigation countermeasure, the horizontal flow-isolating plate, shows satisfactory performance particularly in PI shaped bridge deck type. Details of the wind tunnel test are firstly presented to give an overall description of this appendage and its control effect. Then, the computational-fluid-dynamics(CFD) method is introduced to investigate the control mechanism, using two-dimensional Large-Eddy-Simulation to reproduce the VIV process. The Reynolds number of the cases involved in this paper ranges from $1{\times}10^5$ to $3{\times}10^5$, using the width of bridge deck as reference length. A field-filter technique and detailed analysis on wall pressure are used to give an intuitive demonstration of the changes brought by the horizontal flow-isolating plate. Results show that this aerodynamic appendage is equally effective in suppressing vertical and torsional VIV, indicating inspiring application prospect in similar PI shaped bridge decks.

유체에 잠긴 다공 원통형 쉘의 자유진동해석 (Free Vibration Analysis of Perforated Shell Submerged in Fluid)

  • 정명조;조종철
    • 한국전산구조공학회논문집
    • /
    • 제19권3호
    • /
    • pp.247-258
    • /
    • 2006
  • 물에 잠긴 다공 원통형 쉘의 경우 물에 잠긴 상태로 유한요소해석을 하기에는 거의 불가능하므로 등가물성치를 사용하여야 한다. 다공 평판의 경우 이에 대한 등가물성치를 ASME 코드에서 제시하고 있지만, 다공 원통형 쉘의 등가물성치에 대한 연구는 아직까지 수행된 적이 없다. 따라서 본 연구에서는 유한요소해석을 이용하여 다공 원통형 쉘의 동적 해석에 이용할 수 있는 등가물성치를 제안하였고 그 타당성을 검증하였다.

타원형 띠기초의 자유진동 해석 (Free Vibration Analysis of Elliptic Strip Foundation)

  • 이태은;강희종;김권식;이병구
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.548-555
    • /
    • 2005
  • Since soil-structure interactions are one of the most important subjects in the structural/foundation engineering, much study concerning the soil-structure interactions had been carried out. One of typical structures related to the soil-structure interactions is the strip foundation which is basically defined as the beam or strip rested on or supported by the soils. At the present time, lack of studies on dynamic problems related to the strip foundations is still found in the literature. From these viewpoint, this paper aims to theoretically investigate dynamics of the elliptic strip foundations and also to present the practical engineering data for the design purpose. Differential equations governing the free, out-of-plane vibrations of such sap foundations we derived, in which effects of the rotatory and torsional inertias and also shear deformation are included although the warping of the cross-section is excluded. Governing differential equations subjected to the boundary conditions of free-free end constraints are numerically solved for obtaining the natural frequencies and mode shapes by using the numerical integration technique and the numerical method of non-linear equation.

  • PDF

편집설계 기법을 이용한 압축기 설계 시스템 개발 (Development of a Compressor Design System Using Configuration Design Method)

  • 이강수
    • 한국CDE학회논문집
    • /
    • 제16권1호
    • /
    • pp.52-60
    • /
    • 2011
  • In this research, we developed a design system for a compressor of an air conditioner using solid CAD system. The developed design system has some characteristics. First, the design system used a configuration design method, so a designer can design a compressor very quickly by using the constructed master libraries. Next, the system was developed to be used not only by engineers but also by salesmen. It is very easy for a user to use it, so a salesman can get a result very easily with the design system. And it has some design modules which give a considerable convenience to designers. Actually, designers are accustomed to the module based design. Then, it has calculation and analysis functions. Volume and mass of a part, and interference between parts are calculated by using the geometric calculation function of a solid CAD system. Also a packaging calculation was implemented to get the smallest space to package compressors for transportation and storing. An interface with a program to analyze the vibration of a compressor was developed in this design system. The design system is similar to CBD (Case-Based Design) system in the view of the whole design process.

아치구조물의 구조해석에서 수치미분의 적용 (Application of Numerical Differentiation in Structural Analyses of Arch Structures)

  • 이병구;김석기;이태은
    • 한국전산구조공학회논문집
    • /
    • 제19권4호
    • /
    • pp.441-447
    • /
    • 2006
  • 이 논문은 구조해석에서 수치미분의 적용성에 관한 연구이다. 구조물 선형식의 미분은 구조물의 거동해석에서 반드시 필요한 수학적 계산 중의 하나이다. 아치와 같이 구조물의 선형식이 곡선인 경우에 미분식의 산출은 많은 시간과 노력을 필요로 한다. 이 연구에서는 구조해석에서 수치미분의 적용성을 아치의 자유진동 문제를 통하여 검증하였다. 전진 5차다항식으로부터 아치 곡률항의 미분값을 계산하고 이를 대수적으로 구한 곡률항과 비교하였다 이렇게 얻은 곡률항을 이용하여 최종적으로 산출한 아치의 고유진동수는 문헌해와 아주 우수하게 근접하였다. 이러한 결과로부터 구조해석에서 수치미분의 적용성과 그 결과의 정확성을 입증할 수 있었다.

3차원 10절점-상당요소에 의한 굽힘문제의 정적.동적해석 (Static and Dynamic Analyses of Bending Problems Using 3-Dimensional 10-Node Equivalent Element)

  • 권영두;윤태혁
    • 전산구조공학
    • /
    • 제10권4호
    • /
    • pp.117-130
    • /
    • 1997
  • 본 논문에서는 등방성판의 인장이나 전단변형은 물론 굽힘문제에도 적용할 수 있는 3차원 고체요소들 중에서 최소의 자유도를 갖는 수정 10절점 상당요소를 제안하였다. 제안된 수정 10절점 상당요소는 Q11요소나 20절점요소로부터 자유도가 줄어듬에 기인한 과대한 굽힘강성을 나타낸다. 이러한 상대적 강성과잉 현상을 수정하기 위한 효과적인 방법으로 가우스 적분점 수정 방법을 제안하였다. 수정량은 포아송 비의 함수이다. 수정 10절점 상당요소의 효과를 여러 가지 예에 적용하여 검증하였다. 제안된 수정 10절점 상당요소에 의한 등방성판의 정적해석과 자유진동 해석의 결과들은 20절점요소를 사용한 결과들과 잘 일치하였다.

  • PDF