• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.1-7
• /
• 2015

As energy consumption of building and the reduction of carbon dioxide emissions have been emphasized, phase change materials(PCM) have been introduced as building materials due to its high heat storage performance. Using shape-stabilizing technique, octadecane/xGnP shape-stabilized PCM(SSPCM) can prevent leakage and improve heat storage performance. The objectives of this study are to propose mix design method of concrete mixed with SSPCM and to evaluate mechanical behaviors of the concrete mixed with SSPCM manufactured according to the proposed mix design. Based on the previously reported material test result, the existing mix design of plain concrete(Concrete standard specification, 2009) is modified to consider reduction of strength in concrete due to the addition of SSPCM. To verify the proposed mix design, specimens are fabricated according to the proposed mix design and axial strength tests and three-point loading tests are performed. Test results show that compressive strengths of the tested specimens reach the designed strength even when two different mix ratios of SSPCM are used. From three-point loading tests, flexural stresses decrease as mix ratio of SSPCM increases.

• 한국지진공학회논문집
• /
• 제6권4호
• /
• pp.7-13
• /
• 2002

지진하중을 받는 철근콘크리트 패널의 이력거동을 힘의 평형조건, 변형의 적합조건 및 재료의 구성법칙을 이용한 재료메카니즘을 이용하여 예측하였다. 해석에서는 7단계의 압축응력-변형률곡선과 6단계의 인장응력-변형률곡선으로 구성된 콘크리트의 응력-변형률 모델을 이용하였다. 콘크리트의 응력-변형률 모델에는 균열이 발생한 콘크리트의 연화효과에 의한 압축강도 저감효과가 고려되었다. 해석에 적용된 반복하중을 받는 철근의 평균 응력-변형률관계에는 바우싱거효과 및 철근과 콘크리트의 부착작용을 고려한 인장경화효과가 고려되었다. 해석에 의하여 예측된 패널의 이력거동은 철근비가 다른 3개의 철근콘크리트 패널시험에 의하여 검증되었다. 해석법은 패널의 이력곡선을 추적하여 철근비가 점차 증가하는 시험체의 최대전단응력을 매우 정확히 예측하였다. 또한, 해석에 의하여 예측된 수직 및 수평변형률은 실험에서 관찰된 변형률과 잘 일치하였다.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.177-192
• /
• 2014

One of the main applications of FRP composites is confining concrete columns. Hence identifying the cyclic and monotonic stress-strain behavior of confined concrete columns and the parameters influencing this behavior is inevitable. Two significant parameters affecting the stress-strain behavior are aspect ratio and corner radius. The present study aims to scrutinize the effects of corner radius and aspect ratio on different aspects of stress-strain behavior of FRP confined concrete specimens (rectangular, square and circular). Hence 44 FRP confined concrete specimens were tested and the results of the tests were investigated. The findings indicated that for specimens with different aspect ratios, the relationship between the ultimate stress and the corner radius is linear and the variations of the ultimate stress versus the corner radius decreases as a result of an increase in aspect ratio. It was also observed that increase of the corner radius results in increase of the compressive strength and ultimate axial strain and increase of the aspect ratio causes an increase of the ultimate axial strain but a decrease of the compressive strength. Investigation of the ultimate condition showed that the FRP hoop rupture strain is smaller in comparison with the one obtained from the tensile coupon test and also the ultimate axial strain and confined concrete strength are smaller when a prism is under monotonic loading. Other important results of this study were, an increase in the axial strain during the early stage of unloading paths and increase of the confining effect of FRP jacket with the increase and decrease of the corner radius and aspect ratio respectively, a decrease in the slope of reloading branches with cycle repetitions and the independence of this trend from the variations of the aspect ratio and corner radius and also quadric relationship between the number of each cycle and the plastic strain of the same cycle as well as the independence of this relationship from the aspect ratio and corner radius.

• Steel and Composite Structures
• /
• 제34권6호
• /
• pp.783-794
• /
• 2020

Steel-concrete-steel sandwich composite wall is composed of two external steel plates and infilled concrete core. Internal mechanical connectors are used to enhance the composite action between the two materials. In this paper, the compressive behavior of a novel sandwich composite wall was studied. The steel trusses were applied to connect the steel plates to the concrete core. Three short specimens with different truss spacings were tested under compressive loading. The boundary columns were not included. It was found that the failure of walls started from the buckling of steel plates and followed by the crushing of concrete. Global instability was not observed. It was also observed that the truss spacing has great influence on ultimate strength, buckling stress, ductility, strength index, lateral deflection, and strain distribution. Three modern codes were introduced to calculate the capacity of walls. The comparisons between test results and code predictions show that AISC 360 provides significant underestimations while Eurocode 4 and CECS 159 offer overestimated predictions.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.167-194
• /
• 2004

In this paper axial loading tests on low strength concrete members, which were confined with various thickness of carbon fiber reinforced polymer (CFRP) composite sheets are described. Totally 46 specimens with circular, square and rectangular cross-sections with unconfined concrete compressive strengths between 6 and 10 MPa were included in the test program. During the tests, a photogrammetrical deformation measurement technique was also used, as well as conventional measurement techniques. The contribution of external confinement with CFRP composite sheets to the compressive behavior of the specimens with low strength concrete is evaluated quantitatively, in terms of strength, longitudinal and lateral deformability and energy dissipation. The effects of width/depth ratios and the corner radius of the specimens with rectangular cross-section on the axial behavior were also examined. It was seen that the effectiveness of the external confinement with CFRP composite sheets is much more pronounced, when the unconfined concrete compressive strength is relatively lower. It was also found that the available analytical expressions proposed for normal or high strength concrete confined by CFRP sheets could not predict the strength and deformability of CFRP confined low strength concrete accurately. New expressions are proposed for the compressive strength and the ultimate axial strain of CFRP confined low strength concrete.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.81-88
• /
• 2021

최근 지진 빈도 증가로 구조물 건전도 모니터링 (SHM: Structural Health Monitoring, 이하 SHM) 시스템에 대한 관심이 증가하고 있다. Smart concrete는 전기-역학적 거동을 바탕으로 구조물 상태를 분석할 수 있는 기술이다. 하지만 콘크리트 구조물은 지진 시 정적 변형률 또는 하중 속도 보다 10배 이상 빠른 하중 속도가 작용하나 기존 연구 대부분은 정적 하중 속도에서의 감지 능력을 주로 조사하고 있다. 본 연구는 지진과 같이 높은 하중 속도에서 자가 응력감지 능력을 평가하기 위해 만능재료시험기 (UTM: Universal Testing Machine, 이하 UTM)를 사용하여 3가지 하중 재하 속도 (1, 4, 8 mm/min) 하에서 Smart Ultra High Performance Concrete (S-UHPC)의 전기-역학적 거동을 측정하였다. S-UHPC의 최대 압축 하중에서 Stress sensitive Coefficient (SC)는 1 mm/min 하중 속도 기준 -0.140%/MPa로 측정되었으나, 하중 속도가 각각 4, 8 mm/min으로 증가함에 따라 42.8 %, 72.7% 감소하였다. 전도성 재료의 변형 감소, 미세균열 증가로 인하여 S-UHPC의 감지능력이 하중속도 증가에 따라 감소하였지만, 그럼에도 불구하고 높은 하중 속도 하에서도 우수한 감지 성능을 보여 구조물 지진 하중 감지를 위한 SHM 시스템에 활용 가능함을 확인하였다.

• 콘크리트학회지
• /
• 제2권2호
• /
• pp.93-99
• /
• 1990

본 연구는 극한강도 이론에 입각한 고강도 콘크리트 부재의 설계를 위한 방법 중 가장 중요한 요소의 하나인 응력-변형도 곡선의 이상화에 관한 연구이다. 이를 위하여 보통강도(280kg/$\textrm{cm}^2$)에서 초고강도(1050kg/$\textrm{cm}^2$)까지의 콘크리트를 사용하여 부재를 제작, 시험하였으며, 기존의 여러 가지 이론과 비교검토를 하였다. 주요 변수는 콘크리트 강도이외에 주근의 양과 전단 보강근의 간격으로 하였다. 실험결과 현재으 ACI Building Code에 규정된 직사각형 응격블록은 고강도 콘크리트에도 사용할 수있음을 알 수 있었다.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.33-39
• /
• 2017

In this study, two types of aggregate were used for making self-compacting concrete. Standard cubic specimens were exposed to different temperatures. Seventy-two standard cylindrical specimens ($150{\times}300mm$) and Seventy-two cubic specimens (150 mm) were tested. Compressive strengths of the manufactured specimens at $23^{\circ}C$ were about 33 MPa to 40 MPa. The variable parameters among the self-compacting concrete specimens were of sand stone type. The specimens were exposed to 23, 100, 200, 400, 600, and $800^{\circ}C$ and their mechanical specifications were controlled. The heated specimens were subjected to the unconfined compression test with a quasi-static loading rate. The corresponding stress-strain curves and modulus of elasticity were compared. The results showed that, at higher temperatures, Scoria aggregate showed less sensitivity than ordinary aggregate. The concrete made with Scoria aggregate exhibited less strain. The heated self-compacting concrete had similar slopes before and after the peak. In fact, increasing heat produced gradual symmetrical stress-strain diagram span.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.515-516
• /
• 2006

The goal of total disc replacement is to restore pain-free mobility to a diseased functional spinal unit, by replacing the degenerated disc with a mobile bearing prosthesis. SB Charite III is named commercial product as the Artificial Intervertebral Disc (AID). SB Charite III consists of sliding core and endplate made by Ultra-high Molecular Weight Polyethylene (UHMWPE) and cobalt chrome alloy, respectively. To evaluate the effect of von-Mises stress in AID, and three-dimensional finite element model of AID analysis was preformed for four different loading types of sliding core. Consequently, endplate was compared with a compressive preload at 400N and flexion moment at $3{\sim}9Nm4. Therefore, this research has obtained result that von-Mises stress of sliding core in AID disc by radius curvature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.93-98
• /
• 1991

Polymer-Impregnated Concrete(PIC) can be considered composite material of concrete and polymer and has superior properties compared to conventional cement concrete, such as strength, stiffness, toughness, durability, water-proofing, chemical resistance. However, so far, the usage of PIC has been limited to repairing materials and non-structural applications, due to the lack of the design criteria and the analytical model to determine structural behavior. The objective of this study is to define the stress-strain response and strength characteristics of PIC in uniaxial and various biaxial compressive loading. On the bases of experimental results, general stress-strain relation, biaxial failure envelope and strength evaluation formular of PIC made with normal aggregate and methylmethacrylate(MMA) are proposed.