• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.133-137
• /
• 1992

A novel oral controlled release tablet which may offer more uniform drug level in the body than simple zero-order was developed. The tablet is composed of three layers; outer film layer, middle part compression-coated hydroxypropylmethylcellulose (HPMC) matrix layer, and inner core layer. Each layer contains nicardipine HCl as a model drug. In vitro dissolution test showed that the tablet released the drug in clear three steps; a rapid initial release, followed by a constant rate of release, and then a second phase of fast release of drug. The dissolution characteristics could be modified easily by changing the grade of HPMC, thickness of matrix layer, content of methylcellulose in matrix layer, content of active ingredient in each layer. The pH of dissolution medium did not affect the release profile. This three-step release system is expected to raise the blood concentration rapidly to effective level and to maintain effective blood level longer than simple slow-release systems.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.4
• /
• pp.281-287
• /
• 1992

Omeprazole (OMZ) is very unstable in acidic solution, which selectively inhibit the release of the gastric juice in the gastric mucosa, In order to stabilize (OMZ) in oral solid dosage form, the enteric-coated microcapsules and compression-coated OMZ tablets containing lysine or arginine as stabilizer were prepared and their dissolution and stability test were performed. The haif life of OMZ microcapsules containing arginine was 194 days at $30^{\circ}C$ and OMZ was completely released in 60 min. The half-lives of enteric coated and non-coated compression-coated OMZ tablets with lysine were 292 and 95 days at $30^{\circ}C$, respectively. The half-lives of enteric coated and non-coated compression-coated tablets with arginine were 1752 and 293 days at $30^{\circ}C$, respectively, and OMZ were released completely in 20 min in the 2nd fluid of K.P.VI. Consequently, the enteric-coated compression-coated OMZ tablets with arginine as stabilizer provided a good formulation for oral solid dosage form.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.151-160
• /
• 1990

In order to develop a controlled-release oral drug delivery system (DDS) which sustains the plasma acetaminophen (AAP) concentration for a certain period of time, microporous membrane-coated tablets were prepared and evaluated in vitro. Firstly, highly water-soluble core tablet of AAP were prepared with various formulations by wet granulation and compression technique. Then the core tablets were coated with polyvinychloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of core tablets and coating suspensions on the pharmaceutical characteristics such as drug release kinetics and membrane stability of the coated tablets was investigated in vitro. AAP was released from the coated tablets as a zero-order rate in a pH-independent manner. This independency of AAP release to pH change from 1.2 to 7.2 is favorable for the controlled oral drug delivery, since it will produce a constant drug release in the stomach and intestine regardless of the pH change in the GI tract. Drug release could be extended upto 10 h according to the coating condition. The release rate could be controlled by changing the formula compositions of the core tablets and coating suspensions, coat weight per each tablet, and especially PVC/sucrose ratio and particle size of the sucrose in the coating suspension. The coated tablets prepared in this study had a fairly good pharmaceutical characteristics in vitro, however, overall evaluation of the coated tablet should await in vivo absorption study in man.

• Archives of Pharmacal Research
• /
• v.23 no.5
• /
• pp.507-512
• /
• 2000

This study set out to improve the physical and pharmaceutical characteristics of the present formulation using an appropriate experimental design. The work described here concerns the formulation of the dispersible tablet applying direct compression method containing roxithromycin in the form of coated granules. In this study $2^3$ factorial design was used as screening test model and Central Composite Design (CCC) associated with response surface methodology was used as optimization study model to develop and to optimize the proper formulation of roxithromycin dispersible tablet. The three independent variables investigated were functional excipients like binder (X1), disintegrant (X2) and lubricant (X3). The effects of these variables were investigated on the following responses: hardness (Y1), friability (Y2) and disintegration time (Y3) of tablet. Three replicates at the center levels of the each design were used to independently calculate the experimental error and to detect any curvature in the response surface. This enabled the best formulations to be selected objectively. The effect order of each term to all response variable was X3> X2> Xl> X1＊X2> X2＊X2> X2＊X3> X3＊X3> Xl＊X3> Xl＊Xl and model equations on each response variables were generated. Optimized compositions of formula were accordingly computed using those model equations and confirmed by following demonstration study. As a result, this study has demonstrated the efficiency and effectiveness of using a systematic formulation optimization process to develop the tablet formulation of roxithromycin dispersible tablet with limited experiment.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3111-3111
• /
• 2001

The implementation of NIR and chemometrics in the Pharmaceutical industries is still in strong progress, both regarding qualitative and quantitative applications and beneficial results are seen. Looking at the development so far, NIR will change the pharmaceutical industry even more in the future. This presentation will address the experiences and progress achieved regarding the application and implementation of quantitative methods for determination of content uniformity and assay of tablets with less than 10% w/w of active, using Near Infrared transmittance spectroscopy in combination with PLS. Also qualitative methods for identification of the same tablets by Near Infrared reflectance spectroscopy will be discussed. Four commercial tablet strengths are formulated and produced from two different compositions by direct compression. Three different strengths are dose proportional, i.e. fixed concentration by varying in size. The aim was to replace the conventional primary methods for analysing content uniformity, assay and identification by NIR. Studies were performed on comparing transmittance versus reflectance spectroscopy for both applications on the dose proportional tablets. The model for determination of content uniformity and assay was developed to cover both coated and uncoated tablets, whereas the qualitative model was developed to identify coated tablets only. The impact of the tablet formulation, tablet size and coating, resulted in individual models far each composition The best calibration was achieved using diffuse reflectance for the identification purposes and diffuse transmittance for the quantitative determination of the active content within the tablets. As NIR in combination with other techniques opens up the possibility of total quality management within the production, the transfer of the above-mentioned models from a laboratory based approach to an at-line approach at H.Lundbeck will be addressed too.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.