• 한국융합학회논문지
• /
• 제7권5호
• /
• pp.51-57
• /
• 2016

본 연구는 초음파 영상(ultrasound imaging)을 이용하여 네발기기 자세(quadruped position)에서 골반압박벨트(pelvic compression belt)가 뭇갈래근과 척추세움근의 근두께에 융합적으로 미치는 영향을 알아보기 위해 실시되었다. 대상자는 30명의 남자대학생으로 실험에 자발적으로 참여한 자로 선정하였다. 골반압박벨트를 위앞엉덩뼈가시아래(anterior superior iliac spines)에 착용한 상태와 착용하지 않은 상태에서 네발기기 자세를 실시하였고, 초음파영상 진단장치를 이용하여 근 두께를 측정하였다. 자료분석은 반복측정분산분석을 이용하였다. 연구결과, 뭇갈래근의 경우 골반압박벨트를 착용하였을 때가 착용하지 않았을 때보다 근두께가 유의하게 증가하였고(p<.05), 척추세움근의 경우도 골반압박벨트를 착용하였을 때가 착용하지 않았을 때보다 근두께가 유의하게 증가하였다(p<.05). 따라서 본 연구결과를 통해 골반압박벨트의 착용이 요통환자에게 효과적이며, 임상에서 다양한 네발기기 자세운동의 처방과 적용 시에 유용한 자료로 활용하고자 한다.

• 한국응급구조학회지
• /
• 제15권1호
• /
• pp.37-46
• /
• 2011

Purpose : This study is equivalence experiment performed to test practice effects between experimental group from both left and right direction of mannequin and control group having practice from only right direction in cardiopulmonary resuscitation education. Methods : Subject of the research were total 71 elementary and middle school teachers in J province who had not experience to have cardiopulmonary resuscitation. They were divided into experimental group of 35 participants who practiced cardiopulmonary resuscitation from both right and left direction of mannequin on Dec. 27, 2009 and control group of 36 participants who performed cardiopulmonary resuscitation from only right direction of mannequin on Dec. 28, 2009. Collected data were analyzed by SPSS/PC+(version 14.0). Results : 1. There was no statistically significant difference by sex among general characteristics of the subjects. 2. According to the quality of chest compression performed from the right direction of mannequin, experimental group showed better results in proper depth (time), insufficient depth (time), too lowered compression position (time) and inexact position (time) than control group(p<.05). In the quality of chest compression from the left side of mannequin, experimental group performed better results in proper depth (time), insufficient depth (time), inexact compression position (time) and mean chest compression depth(mm) than control group(p<.05) and also in more left-centered compression position (time) than control group(p<.001). 3. The quality of chest compression by experimental group, the right side of mannequin was superior in proper depth (time) to the left side of mannequin (p<.001) and showed better results in insufficient depth (time) and chest compression/recoil rate (p<.05). According to the quality of chest compression by control group, the right side of mannequin showed superior results in proper depth (time), insufficient depth (time), too left-centered compression position (time) and mean chest compression depth (mm) (p<.05) to the left side of mannequin. Conclusion : The group having practice from both right and left sides of mannequin was superior in the quality of chest compression to the group having practice from only right side of mannequin. How to practice cardiopulmonary resuscitation from both right and left sides of mannequin can be recommended and practice from left side of mannequin is also useful.

• 한국응급구조학회지
• /
• 제23권2호
• /
• pp.99-107
• /
• 2019

Purpose: This study aimed to identify the position for the most accurate head-up cardiopulmonary resuscitation (CPR) by comparing saddle position CPR (SPCPR) and traditional CPR (TCPR). Methods: Sixty certified persons who completed a basic life support provider course between May 1 and June 21, 2019 were enrolled in the study. The participants were asked to perform 2 minutes of CPR, and the depth of chest compression, rate, position, full release, and hands off time were assessed. Accuracy was evaluated based on data collected from a smart phone application connected to the manikin via bluetooth and analyzed using frequency, percentage, t-test, analysis of variance and ${\chi}^2$. Results: The accuracy of chest compression was statistically significantly higher for SPCPR, 63.03%[${\pm}8.75$] for SPCPR and 55.50%[${\pm}10.17$] for TCPR [t=3.074, p=.003]. The depth of chest compression was statistically significantly greater for SPCPR, 4.51cm[${\pm}0.45$] for SPCPR and 4.16cm[${\pm}0.61$] for TCPR [t=2.503, p=.015]. The rate of chest compression was statistically significantly higher for TCPR, 105/min[${\pm}10.79$] for SPCPR and 111/min[${\pm}11.57$] for TCPR [t=-2.008, p=.049]. Accuracy of position of chest compression was statistically significantly higher for SPCPR, 96.10%[${\pm}13.73$] for SPCPR and 79.93%[${\pm}30.34$] for TCPR [t=2.659, p=.011]. Accuracy of full release was higher with SPCPR, with 86.30%[${\pm}30.53$] for SPCPR and 71.10%[${\pm}36.05$] for TCPR, but the difference was not statistically significant [t=1.762, p=.083]. Conclusion: Saddle position CPR was found to be more accurate than TCPR in the performance of manual head-up CPR.

• 대한물리치료과학회지
• /
• 제15권4호
• /
• pp.35-42
• /
• 2008

Background : To assess the effect of a pelvic compression belt on the strength of hip flexor in healthy young individuals. Study design: Pre- and post-treatment measurement design on one factor was used. Methods : 30 healthy volunteers (male: 15, female: 15) participated in this study. Dynamometer was used to measure the strength of hip flexor, and measurements were performed before and after the application of the pelvic compression belt at neutral position of hip joint and at 30 cm raised position from floor with straight leg in supine. Results : After the application of the pelvic compression belt, the strengths of hip flexor measured at both positions were significantly increased when compared with before the application (p<.05). However, at neutral position of hip joint and at 30cm raised position from floor, there were significantly different in the changing patterns in the strengths of hip flexor between men and women (p>.05). Conclusion : The findings suggest that the pelvic compression belt is helpful in strengthening hip muscles. With easy application, it is sufficiently feasible for clinical use.

• 한국응급구조학회지
• /
• 제12권3호
• /
• pp.27-41
• /
• 2008

Purpose : The purpose of this study was to supply basic data for the impact on the accuracy of basic CPR according to position and foot-board height of basic CPR provider. Methods : Study design was within - group design. Subjects were 25 EMT-P Students in K city. Interventions was basic CPR performed on a resuscitation manikin placed on a hospital bed, kneeling on the bed adjacent to the manikin. Data was analyzed using descriptive statistics and Friedman test. Results : In case of the basic CPR performed on a resuscitation manikin placed on a hospital bed, ventilation accuracy was the highest in less than 160 cm height, foot-board height : $34.2{\pm}1.48cm$, 91.4% and in 161-165 cm height, foot-board height : $26.0{\pm}2.14cm$, 88.4% and in 171-175 cm height, foot-board height : $23.0{\pm}1.41cm$, 91.3% and in the above 176 cm, kneeling on the bed, 95%. Chest compression accuracy was the highest in less than 160 cm height, foot-board height : $30.2{\pm}1.48cm$, 95.6% and in 161-165 cm height, kneeling on the bed, 97.6% and in 171-175 cm height, kneeling on the bed, 98.5% and in the above 176 cm, kneeling on the bed, 98.7% and foot-board height : $20.5{\pm}1.91cm$, 98.7%. Chest compression error was due to too weak : 2.0-35.4 times. There were ststistically significant differences in 191-195 cm group according to chest compression mean depths($x^2=10.824$, p = .013) and chest compression error (p = .040). Conclusion : In contrast to current guidelines, the position and foot-board height of basic CPR provider are very important to the accuracy of the basic CPR. Furthermore, we recommend that a using real time audiovisual feedaback system significantly improve the quality of chest compression and ventilation during resuscitation.

• 전자공학회논문지C
• /
• 제34C권3호
• /
• pp.23-36
• /
• 1997

In tis paper, sthe new data model for the hardware implementation of lempel-ziv compression algorithm was proposed. Traditional model generates the codeword which consists of 3 bytes, the last symbol, the position and the matched length. MSB (most significant bit) of the last symbol is the comparession flag and the remaining seven bits represent the character. We confined the value of the matched length to 128 instead of 256, which can be coded with seven bits only. In the proposed model, the codeword consists of 2 bytes, the merged symbol and the position. MSB of the merged symbol is the comression flag. The remaining seven bits represent the character or the matched length according to the value of the compression flag. The proposed model reduces the compression ratio by 5% compared with the traditional model. The proposed model can be adopted to the existing hardware architectures. The incremental factors of the compression ratio are also analyzed in this paper.

• 대한물리의학회지
• /
• 제12권3호
• /
• pp.1-10
• /
• 2017

PURPOSE: This study assessed the effect of the pelvic compression belt on the electromyographic activity of erector spinae (ES), internal oblique (IO), rectus femoris (RF), and biceps femoris (BF) after bridge exercise with pelvic belt compression in subjects with lumbar instability. METHODS: Forty subjects with lumbar instability volunteered for this study. We asked them to perform the bridge exercise while wearing a pelvic belt compression for 30 minutes five times weekly over a six week period. The pelvic compression belt was adjusted just below the anterior superior iliac spines with stabilizing pressure using elastic compression bands during bridge position. Surface electromyographic data were collected from the erector spinae (ES), internal oblique (IO), rectus femoris (RF) and biceps femoris (BF). RESULTS: After the six week intervention, the experimental group improved significantly. Muscle activation significantly decreased in the erector spinae, rectus femoris, and biceps femoris, and increased in the internal oblique muscle in bridge position while wearing a PCB (P <.01). CONCLUSION: Our findings suggest that the bridge exercise with pelvic belt compression is helpful to reduce activation in superficial muscles and lower extremity muscles such as erector spinae (ES), rectus femoris (RF), biceps femoris (BF) and increase activation in deep trunk muscle such as the internal oblique (IO).

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1478-1485
• /
• 1993

본 연구에서는 압축 성형다이 가열선의 최적위치를 결정하는 문제를 다이의 형상 최적설계 문제로 정식화하고자 한다. 최적화 문제의 목적은 다이 내면의 온도를 지정된 온도로 균일하게 유지하는 것이다. 또한 Lee, Choi와 Kwak의 형상 설계 민감 도 해석을 위한 직접 미분 방법을 응용하여 가열선 위치변화에 관한 민감도 계산을 위한 경계 적분 방정식을 유도하고, 경계요소법으로 온도와 온도의 민감도를 해석하고 자 한다. 수치적 응용의 예로서, 넓은 평판의 성형을 위한 압축 성형다이의 가열선의 최적위치를 결정하는 문제를 다루고, 최적위치에서 가열선의 개수가 온도의 균일성에 미치는 영향을 검토한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.63-67
• /
• 1994

A main property for fiber reinforced thermoplastic composite material in compression molding is the flow of fibers. This flow is so effective a long direction of acting force that this study examined for the inclined angel of 30$^{\circ}$, 45$^{\circ}$ and 6$^{\circ}$. Below the near softing temperature of plastic, the fiber has been fractured at a point so that the fiber strength is smaller then the local hydrostatic stress in the mold. It has been found that the position of fracture is changing accrding to the incling angle. In case of the above softing temperature, the larger the inclined is, the farther the flow of fiber move. Also the plastic flow has been progresed with the cicular are type.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.125-132
• /
• 2002

PMSMS (permanent magnet synchronous motors) are widely used in industrial applications and home appliances because of their high torque to inertia ratio, superior power density, and high efficiency. For high performance control, accurate informations about the rotor position is essential. Sensorless algorithms have lately been studied extensively due to the high cost of position sensors and their low reliability in harsh environments. A novel position sensorless speed control for PMSMs uses indirect flux estimation and is presented in this paper. Rotor position and angular velocity are estimated by the proposed indirect flux estimation. Linkage flux and magnetic field flux are calculated by the voltage equations and the measured phase current without any integration. Instead of linkage flux calculation with integral operation, indirect flux and differential magnetic field are used for the estimation of rotor position. A proper rejection technique fur current noise effect in the calculation of differential linkage flux is introduced. The proposed indirect flux detecting method is free from the integral rounding error and linkage flux drift problem, because differential linkage flux can be calculated without any integral operation. Furthermore, electrical parameters of the PMSM can be measured by the proposed TCM (time compression method) for soft starting and precise estimation of rotor position. The position estimator uses accurate electrical parameters that are obtained from the proposed TCM at starting strategy. In the operating region, a proper compensation method fur temperature effect can compensate fir the estimation error from the variation of electrical parameters. The proposed novel position sensorless speed control scheme is verified by the experimental results.