• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.143-152
• /
• 2006

JPEG2000, the standard of still image compression based on wavelet, will be widely used. One of the greatest characteristics of JPEG2000 is to offer ROI(Region-Of-Interest) coding. This is to compress with high quality the region that the user wants better than the other region. JPEG2000 and ROI have different parameters, which are tile size and ROI size, wavelet filter type and ROI shape and its location, codeblock size and number of ROI, number of DWT decomposition level and ROI importance, and number of quality layer and low resolution sub-band importance. In this paper, we shows the correlation of the parameters and ROI coding methods through experiments. This helps an application select the parameters and the methods to meet the application.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.275-280
• /
• 2013

Recently, access networking BroadBand the high performance of the video equipment to the Internet via voice, video, multimedia services, such as dealing with the media information dissemination is becoming increasingly attracting attention. More video devices and network environments in the future to keep pace with the high-quality video using the form dealing with an increasingly diversified and shall utilization is expected. Among them, video encoding technology, image compression encoding technology of information technology is one of the central role. Video coding technology that requires a vast amount of information contained in the video signal and the appropriate amount of information to eliminate redundancy as the efficiency of the digital code representing video signal is developed as a technology is going. Therefore, this study applied to video coding mode selection in the cost evaluation methods to examine and to maximize the coding efficiency and the proposed method compared to the conventional method was confirmed excellence.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6501-6504
• /
• 2012

Background: Multiple myeloma is the most common malignant plasma cell dyscrasia and ranks second among primary haematological malignancies. This study describes the epidemiologic, clinical and pathologic profile of monoclonal gammopathies seen in the University Hospital of the West Indies (UHWI), a tertiary care referral centre. Materials and Method: A retrospective analysis of 85 cases diagnosed at UHWI over the 5-year period 2003-2007 was conducted. The cases were identified from the bone marrow records as well as the computerized database of the Medical Records Department. Clinical presentation, family and personal history and demographic data were retrieved. Haematological and biochemical results were also analyzed. Results: There were 85 patients diagnosed with monoclonal gammopathies. The M:F ratio was 1.2:1 and the mean age was $65.7{\pm}1.3$ years. Eighty percent of the patients had skeletal pain and 40% experienced weight loss. Of the patients experiencing bone pain 56.7% had multiple lytic lesions, 26.7% had pathological fractures and 26.7% had compression fractures. Seventy-four patients (87.1%) had a haemoglobin level <12.0 g/dL with 52.9% having values <8.0 g/dL. Renal impairment was evident at diagnosis in 36.5%. Hypercalcemia was seen in 26.5% and hyperuricemia in 45.9%. Of the 79 patients who had serum protein electrophoresis performed, 77.2% had at least one monoclonal band and of these 24.6% had a monoclonal protein also present on urine protein electrophoresis. Conclusions: The demographic profile in this group of patients is largely similar to other studies in predominantly Caucasian populations; however there was a notable increase in prevalence of severe disease at presentation, with the majority of patients presenting at the most advanced stage. It is probable that these differences reflect socioeconomic factors and not merely inherent ethnic variation in disease biology.

• Clinics in Shoulder and Elbow
• /
• v.5 no.1
• /
• pp.29-36
• /
• 2002

Purpose : Cubitus varus deformity has been reported to cause ulnar neuropathy. We present five cases of tardy ulnar nerve palsy due to cubitus vus and analyzed the factors related to the nerve plasy caused by the deformity. Materials and Methods : Three men and two women were reviewed retrospectively and the mean age of the patients were 26 (range, 14-38). The average interval from initial fracture to nerve palsy was 19 years (8-32 years). The severity of symptoms, according to McGowan's classification, was grade I of 2 patients, grade Ⅱ of 3 patients. Carrying angle was an average of 18。 (30° -45° ). Internal rotation angle measured by Yamamoto's method was an average of 33° (30° -45° ). Results ㆍ The mean follow-up period was 53 months (35-70 months). Elbow pain and numbness of the fingers were relieved shortly after surgery. It revealed that anterior subluxation of the nerve due to internal rotation deformity and compression of the nerve between the medially shifted medial head of triceps and the medial epicondyle. Conclusion : The major entrapment point of the nerve is the fibrous band between the two heads of the flexor carpi ulnaris. The severe internal rotation deformity may contribute the cause of tardy ulnar nerve palsy in cubitus varus deformity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.155-160
• /
• 2010

In this paper, we proposed a forensic mark algorithm which can embed the distributor's information at each distribution step to trace the illegal distribution path. For this purpose, the algorithm has to have the high capacity payload for embedding the copyright and user information at each step, and the embedded information at a step should not interfere with the information at other step. The proposed algorithm can trace the multilevel distribution because the forensic mark is generated by digital hologram and embedded in the DWT-SVD domain. For the high capacity embedding, the off-axis hologram is generated from the forensic mark and the hologram is embedded in the HL, LH, HH bands of the DWT to reduce the signal interference. The SVD which is applied the holographic signal enhanced the detection performance and the safety of the forensic mark algorithm. As the test results, this algorithm was able to embed 128bits information for the copyright and user information at each step. In this paper, we can embed total 384bits information for 3 steps and the algorithm is also robust to the JPEG compression.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.669-679
• /
• 2013

When an image is converted from HDR (high dynamic range) to LDR (low dynamic range), a tone mapping process is the essential component. Many TMOs (tone mapping operators) have been motivated by human vision which has lower physical luminance range than that in real scene. The representative of human vision properties which motivate TMOs is the local adaptation. However, TMOs are ultimately compressing image information such as contrast, saturation, etc. and the compression causes defects in image quality. In this paper, in order to compensate the degradation of the image which is caused by TMOs, the visual acuity-based edge stop function is proposed for applying the property of human vision to base-detail separation. In addition, using CSF (contrast sensitivity function) which represents the relationship among spatial frequency, contrast sensitivity, and luminance, the sharpness filter is designed and adaptively applied to the detail layer in regard to surround luminance.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.184-192
• /
• 2000

Objectives : To inquire the prevalence and the risk factors for myofascial pain syndrome (MPS) on young boys in order to use these results as the fundamental data for the prevention of their MPS. Methods : For 7 days in May 1999, this research was taken on 489 male students ranging from 6th to 12th grade. We randomly selected a class for every group and from these classes we operated physical examinations, self-reported questionnaires and from a rehabilitation doctor, MPS test was taken. Thoracic kyphosis and lumbar lordosis were also taken by using the inclinometer. We defined MPS as a regional pain complaint, palpable taut band that is painful on compression. Results : The shoulder MPS prevalence of the subjects were 29.7 persons/100 persons. The statistics revealed that as grades went up, the percentage significantly increased in the MPS prevalence. As of case-control study, 145 students who were tested postive in all aspects were placed as cases, and 176 students who were perfectly normal as controls on risk factors. As a result of comparing the student groups who were stisfied with their chairs to the student groups were not satisfied, the taller showed a significantly higher odds ratio (p<0.01). By the multiple logistic regression test, we concluded that the MPS disease was prevailed far more in the students in the higher grades (Odds ratio: 1.16, 95% C.I.: 1.03-1.31), and also those who were dissatisfied with their chairs than in the ones who were satisfied (Odds ratio: 1.92, 95% C.I.: 1.17-3.17). Conclusions : Significant correlations showed between the MPS diagnosed group and the students who are dissatisfied with their chairs. As a result, more research and observation has to be made concerning this disease, and the desks and chairs should be adjusted to suit the student's physical standards.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.407-412
• /
• 2020

This study investigated the technological development of Korean functional product design for posture correction. We analyzed registered and disclosed Korean patents (n=289) of KIPRIS. They were posture correction technology patents filed from 1999 to 2018. Keywords used in patent selection were posture correction, posture correction clothing, posture correction band, rehabilitation clothing, joint protection, protective equipment, and compression wear. These were then analyzed by patent application year, product type, effect pursued, and posture correction body part. The results showed that patent applications related to posture correction technology have increased since 2014. Products subject to patents for posture correction technology were device/brace (59.5%), footwear (22.5%), and clothing (18.0%). Patents for posture correction pursued various wearing effects. The effects pursued were dependent on the product type. The device/brace focused on joint protection (76.7%) and muscle reinforcement (40.7%). Footwear was focused on joint protection (90.8%). The clothes were focused on muscle reinforcement (50.0%) and body shaping (36.5%). The clothing and device/brace for posture correction were worn on various body parts of the upper limbs to feet. The posture correction product design patent was to correct various body parts. Patents pursuing upper body correction focused on spine posture correction (n=99). Patents for foot posture correction have steadily increased (n=102). Patents for posture correction of the pelvis and hip joints were relatively few (n=46). The results of this study implied the necessity to develop technology to correct posture by combining the functions of device/brace and clothing.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.367-374
• /
• 2003

In this paper, we propose an audio watermarking method using the attribute of tonal masker. First, the attribute of tonal masker as an audio watermarking attribute is analyzed. According to existing researches, it is possible to be imperceptible modulation for the energies of the frequencies that compose a tonal masker. And when the relation between the tone energy and the left or right frequency energy after various signal processing is compared with the one before the processing, very few changes are showed. We propose an audio watermarking method using these attributes of tonal masker. A watermark bit is embedded by the modulation of the difference between the two neighboring frequency energies of a tone. In the detection, the modulated the tonal masker is searched using the key wed in the embedding without original audio and the embedded watermark bit is detected. After each attack of noise insertion, band-pass filtering, re-sampling, compression, echo transform and equalization, the detection error ratios of the proposed method were average 0.11%, 1.26% for Classics and Pops. And the SDG(Subjective Diff-Grades) scale evaluation of the sound quality of the watermarked audio result in the average SDG -0.31.