• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.88-103
• /
• 2008

This study was purposed to investigate the effects of surfactants and fillers on physical properties of hydrophilic polyvinylsiloxane dental impression materials (PVS). Incorporation of surfactants enhanced the hydrophilicity of the PVS, however, it induced increased viscosity and permanent deformation ratio, delayed setting, and decreased tensile strength. At high concentrations of surfactant, the tensile strength was observed to decrease significantly due to the internal pore formation. Especially, the hydrophilicity of the PVS was significantly enhanced with the addition of Silwet L-77. However, the viscosity, strain in compression, pore formation, and setting time increased whereas the elastic recovery rate and strength remarkably decreased. The PVS dental materials containing Span 20 showed the lowest degree of viscosity increase, delayed setting, pore formation, and hydrophilicity. The delayed setting, pore formation, and strength decrease caused by the incorporation of surfactant were improved by substituting the crystalline quartz filler with diatomaceous earth while the contact angle of PVS dental materials increased.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.71-80
• /
• 2011

In period of rapid economic development, as doing river conservation work by using harmful materials environmental pollution has adversely effected humans, animals and plants frequently. For recovery of environmental pollution it needs a lot of time and cost. Therefore, in this study, in order to take an environment-friendly method which is also economical and durable both results of the laboratory model test and field test were compared and analyzed. According to the results of the laboratory model test, those methods such as concrete paving, asphalt paving, bentonite mat, stabilized soil method and mixed soil method have small amount of seepage, but on the other hand compaction soil, grassland and permeable materials have considerable amount of seepage. The results of field test show a similar tendency with laboratory test and have been satisfied to assess standard of domestic water permeability below $1.0{\times}10^{-7}cm/sec$ and unconfined compressive strength is also than 1.0MPa so it has been satisfied about standard. In conclusion, as compaction rate increased, as unconfined compression strength increased and coefficient of permeability decreased.

• Clean Technology
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2014

$CO_2$ is generated by the combustion reaction, when getting the energy from fossil fuel. If the carbon dioxide emissions increases more, the global warming problem will become more serious. CCS (carbon capture storage) needs to be developed for the prevention of this. When liquefied $CO_2$ is transported, BOG (boil-off gas) is generated because of several problems. In the study, by injecting liquefied $CO_2$ in two tanks which contains $40m^3$each, the amount of BOG and its composition were measured during 30 days when generating pressure changes and external heat, loading, unloading. In result, 16,040 kg of BOG was generated and the composition has been found out to be 99.95% $CO_2$ and 0.05 % $N_2$. Also, we conducted simulation process for reliquefaction of generated BOG with vapor compression cycle using the PRO/II with PROVISION version 9.2. As a result, the refrigeration cycle of the total circulation flow rate was 42.07 kg/h and the condenser utility consumption was 48.85 kg/h.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.230-234
• /
• 1999

To improve the crossflow untrafiltration flux, we applied periodic oscillations in transmembrane pressure gradient in order to promote fluid turbulence by inducing repeated compression and relaxation of the cake/gel layer. The oscillatory forms used were square-, sine-, triangle-wave, and pumping interruption. The permeate flux profiles were mathematically simulated and compared with the experimental data. The result showed the periodic pumping interruption most effectively improved the overall flux by up to about 32%. Enough pumping off-time, at least on the order of tens of seconds, was needed to allow the solutes in the layer to diffuse back to the bulk phase. It was better to start the oscillations earlier before the layer was fully established. The square-wave oscillation yielded about 11% increase, which was particularly pronounced in the later part of the filtration. Either the amplitude or the period of the oscillations resulted little influence on flux.actate ester, and lactate ester produced in esterification reaction was distilled simultaneously with hydrolysis reaction into lactic acid. When the yields of lactic acid recovered by batch reactive distillations with various alcohols were compared, the yield of lactic acid was increased as the volatility of lactate ester was increased. In this batch reactive distillation, because the mixtures condensed in partial condensor were flown to reboiler through distillation column, the recovery yield of lactic acid was affected by operation temperature of partial condensor. Hydrolysis reaction into lactic acid in distillation column rarelyoccurred because of short retention time of lactate ester and water. Lactate ester was reacted into lactic acid in reboiler.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.11
• /
• pp.1491-1498
• /
• 2000

Objectives : Embolization of intracranial aneurysms by using Guglielmi detachable coils(GDC) is proving to be a safe method of protecting aneurysms from rupture. Occasionally, patients with unruptured intracranial aneurysms present with symptoms related to the aneurysm's mass effect on either the brain parenchyma or cranial nerves. In the present study, the authors conducted a retrospective review to evaluate the response to GDC embolization in a series of 6 patients presenting with cranial nerve dysfunction due to mass effect. Patients and Methods : Aneurysms were classified by size, shape, and amount of intraluminal thrombus. Patients were classified by duration of symptoms prior to GDC treatment(range<1 month to>4 years). Clinical assessment was performed within days of the GDC procedure and at later follow-up appointments(range 5-16 months, mean 9 months). Results : In the immediate post-GDC embolization period, one of the five patients had transient worsening of third nerve palsy, which later improved to better than baseline status. Two patients who presented with third nerve deficit from a internal carotid artery-posterior communicating artery junction aneurysm had complete recovery. One patient who presented with hemiparesis and dysarthria from a giant mid-basilar aneurysm showed improvement of these symptoms. One patient who presented with sixth cranial nerve deficit from a cavernous aneurysm showed no change at the 8-months follow-up examination. Conclusion : The endovascular treatment of intracranial aneurysms by using GDC is suggested as an alternative therapeutic method for improving or alleviating neurological deficits produced by mass effect.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.302-308
• /
• 1997

The purpose of this study was to investigate the extraction yield and quality stability as to the oleoresin process with large amount of onion at one time. The first mixed-product is raw onion juice which was reduced the compression and concentrated by Brix 70% mixed together wit the residue which was extracted and concentrated by ethanol, the second product manufactured by the same method above after the autoclaving with onion, and the other product is made by grinding by 50mesh to freeze-dried onion. Each of yields were 7.3, 9.1 and 0.8% and each of total sugar content was 616.4, 712.3 and 150.3mg/g. Therefore the product extracted by ethanol from freeze-dried onion was very low in yield and total sugar content. By the index of the overall odor intensity, contents of total pyruvate were 1,733.7, 520.6, and 2,716.5$\mu\textrm{g}$/g for each product. As a result, oleoresin onion processing that desired to use raw onion was remarkable for odor recovery. For the homogenous mixture with concentrate of onion juice and ethanol extract were emulsified by the addition of 2% of PGDR(polyglycerol condensed ricinoleate) and agitation(10,000rpm, 30 minutes). At this time, interfacial tension was 1.9 dyne/cm and the formation of emulsion was for 96.2% when left over 24hours in 6$0^{\circ}C$. When it was to be centrifuged(2,000$\times$G, 80 minutes) after emulsification, the volume of emulsion level without seperation was 92.6%, and very high in emulsification stability. The induced heating-oxidize with soy bean oil and sesame oil added to 1% of onion oleoresin, induction-time extension effect appeared with antioxidant activity that was applicable for 80.8~82.2% as to the effect of addition of 0.02% BHA.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.77-83
• /
• 2015

Frequent pattern mining, which is one of the major areas actively studied in data mining, is a method for extracting useful pattern information hidden from large data sets or databases. Moreover, frequent pattern mining approaches have been actively employed in a variety of application fields because the results obtained from them can allow us to analyze various, important characteristics within databases more easily and automatically. However, traditional frequent pattern mining methods, which simply extract all of the possible frequent patterns such that each of their support values is not smaller than a user-given minimum support threshold, have the following problems. First, traditional approaches have to generate a numerous number of patterns according to the features of a given database and the degree of threshold settings, and the number can also increase in geometrical progression. In addition, such works also cause waste of runtime and memory resources. Furthermore, the pattern results excessively generated from the methods also lead to troubles of pattern analysis for the mining results. In order to solve such issues of previous traditional frequent pattern mining approaches, the concept of representative pattern mining and its various related works have been proposed. In contrast to the traditional ones that find all the possible frequent patterns from databases, representative pattern mining approaches selectively extract a smaller number of patterns that represent general frequent patterns. In this paper, we describe details and characteristics of pattern condensing techniques that consider the maximality or closure property of generated frequent patterns, and conduct comparison and analysis for the techniques. Given a frequent pattern, satisfying the maximality for the pattern signifies that all of the possible super sets of the pattern must have smaller support values than a user-specific minimum support threshold; meanwhile, satisfying the closure property for the pattern means that there is no superset of which the support is equal to that of the pattern with respect to all the possible super sets. By mining maximal frequent patterns or closed frequent ones, we can achieve effective pattern compression and also perform mining operations with much smaller time and space resources. In addition, compressed patterns can be converted into the original frequent pattern forms again if necessary; especially, the closed frequent pattern notation has the ability to convert representative patterns into the original ones again without any information loss. That is, we can obtain a complete set of original frequent patterns from closed frequent ones. Although the maximal frequent pattern notation does not guarantee a complete recovery rate in the process of pattern conversion, it has an advantage that can extract a smaller number of representative patterns more quickly compared to the closed frequent pattern notation. In this paper, we show the performance results and characteristics of the aforementioned techniques in terms of pattern generation, runtime, and memory usage by conducting performance evaluation with respect to various real data sets collected from the real world. For more exact comparison, we also employ the algorithms implementing these techniques on the same platform and Implementation level.