• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.1032-1037
• /
• 2011

본 연구에서는 전처리 공정을 거친 천연가스로부터 에탄 이상의 성분을 회수하기 위한 탈메탄탑에 대한 전산모사와 공정 최적화를 수행하였다. 전처리된 천연가스는 탈메탄탑 상부의 차가운 기상류와의 열교환 및 프로판 냉동 사이클이 포함된 예냉공정을 거친 후에 기상과 액상이 분리된다. 기상은 터보 팽창기를 거치면서 생산되는 동력을 residue gas의 압력을 높이기 위한 압축기에 전달한 후에 부분적으로 응축되어 탈메탄탑 상부로 주입된다. 액상류는 줄-톰슨 팽창 밸브를 거친 후 더욱 냉각되어 탈메탄탑의 중간부로 주입된다. 원료 대비 에탄의 회수율은 80% 이상으로 정하였으며, 탈메탄탑의 탑저에서 에탄에 대한 메탄의 몰비는 0.0119로 정하였다. 한편 프로판 냉동 사이클의 heat duty를 최소화시키기 위해서 원료를 분리하여 side reboiler와 열교환시킴으로써 냉열의 일부를 회수할 수 있었다.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.30-41
• /
• 2020

Lines and textures are natural properties of the surface of natural objects, and their images can be sparsely represented in suitable frames such as wavelets, curvelets and wave atoms. Based on characteristics that the curvelets framework is good at expressing the line feature and wavesat is good at representing texture features, we propose a model for the weighted sparsity constraints of the two frames. Furtherly, a multi-step iterative fast algorithm for solving the model is also proposed based on the split Bergman method. By introducing auxiliary variables and the Bergman distance, the original problem is transformed into an iterative solution of two simple sub-problems, which greatly reduces the computational complexity. Experiments using standard images show that the split-based Bergman iterative algorithm in hybrid domain defeats the traditional Wavelets framework or curvelets framework both in terms of timeliness and recovery accuracy, which demonstrates the validity of the model and algorithm in this paper.

• 한국의류학회지
• /
• 제19권4호
• /
• pp.671-683
• /
• 1995

This paper described the changes of mechanical KES values after fusing 4 different (in weave & density) wool face fabrics with 3 different (in weave & extensibility) fusible interlining. The fusing condition was 15$0^{\circ}C$, 4kg.f/cm2 The results of the study were as follows: (1) After fusing, KES mechanical value of B, 2HB, G, 2HGS, WC increased, where as LT, WT werent't changed so much and EM, RT decreased. It means after fusing extensibility and recovery property were decreased and volume and stiffness were increased. (2) Within the limits of this investigation, tensile property seemed to be more influenced by the characteristics of face fabrics, and bending property nil by the effect of adhesive penetration and shear and compression property did by complex of the characteristics of face fabrics and interlining and the effect of adhesive penetration.

• 한국주조공학회지
• /
• 제22권1호
• /
• pp.11-16
• /
• 2002

Hot deformation behavior of GCD-50 cast iron has been investigated by employing the compressive test. Phenomenological deformation behaviors, which were modeled based on the dynamic materials model and the kinetic model, have been correlated with the microstructural change taken place during compression. Microstructural investigation revealed that the adiabatic shear band caused by the locallized deformation was taken place in low temperature and high strain rate. On the other hand, the wavy and curved grain boundaries, which repersent the occurrence of dynamic microstructure change such as dynamic recovery and dynamic recrystallization, were observed in high temperature and low strain rate. Deformation model based on hyperbolic sine law has also been suggested.

• Structural Engineering and Mechanics
• /
• 제23권4호
• /
• pp.339-352
• /
• 2006

Observing the unique stress-strain curves of the superelastic shape memory alloy (SMA) in tension and compression, the primary intention of this study is to investigate the behavior of the shafts made of the same material, under torsional loading-unloading cycles for large angle of twist. Experiments have been performed for the superelastic SMA shafts with different unsupported lengths and angles of twist and the results are compared with those of stainless steel (SUS304) shafts under similar test conditions. As expected for the superelastic SMA, the residual strains are small enough after each cycle and consequently, the hysteresis under loading-reverse loading is much narrower than that for the SUS304. For large angle of twists, the torsional strength of the superelastic SMA increases nonlinearly and exceeds that of SUS304. Most interestingly, the slender solid superelastic SMA shafts are found to buckle when acted upon torsion for large angle of twist.

• KSBB Journal
• /
• 제10권5호
• /
• pp.482-490
• /
• 1995

The relationship between pressure drop and liquid flow rate, for an axial and a radial flow chromatographic column packed with compressible porous media was theoretically analyzed using modified Kozeny-Carman equation. The results were compared with experimental observations obtained using compressible DEAE-agarose as a model medium. At 2-9 psi range studied, the theoretical derivation accounting for 'gel compression' effect predicted simple Langmuirian type response of volumetric flow rate to changes in pressure drop. On the other hand, the experimental response was more or less sigmoidal. At the same pressure drop, radial column showed 2-3 times higher flow rates than those of axial column both theoretically and experimentally. Using r-HBsAg crude extract, protein resolution effects between the two types of columns at different flow rates were compared side-by-side. It turned out that, though general chromatographic behavior was very similar, axial column was somewhat superior in terms of r-HBsAg recovery yield and specificity. However, the number of theoretical plates analysis indicated the protein resolution effects were comparable.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권2호
• /
• pp.115-117
• /
• 2018

Lingual nerve injury is a rare complication of general anesthesia. The causes of lingual nerve injury following general anesthesia are multifactorial; possible mechanisms may include difficult laryngoscopy, prolonged anterior mandibular displacement, improper placement of the oropharyngeal airway, macroglossia and tongue compression. In this report, we have described a case of bilateral lingual nerve injury that was associated with orotracheal intubation for open reduction and internal fixation of the left distal radius fracture in a 61-year-old woman. In this case, early treatment with dexamethasone effectively aided the recovery of the injured lingual nerve.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.281-284
• /
• 2002

Error resilience for image coding is an important component of multimedia communication system. Error resilience schemes address loss recovery from the compression perspective. Multiple description coding (MDC) is one of the error resilience techniques promising for robust video transmission. It is the way to achieve tradeoff description such as scalar quantization, correlating transform and the quantized frame expansion. In this paper, we consider Multiple Description Scalar Quantization (MDSQ) to wavelet domain. Conventional MDSQ schemes considered description with equal weights in each sub-bands. But, we can see that the each sub-bands is unequal contribution to whole image quality. Therefore, we experiment the multiple design MDSQ table to make probability of zero index high, which gives high efficiency in arithmetic symbol coder. We also compare our proposed method with the conventional methods and show improved performance in terms of redundancy-rate-distortion.

• Journal of Korean Neurosurgical Society
• /
• 제50권1호
• /
• pp.57-59
• /
• 2011

Intradural extramedullary (IDEM) ependymomas occur very rarely and little has been reported about their clinical characteristics. The authors present a case of a 57-year-old woman with an IDEM ependymoma. She was referred for the evaluation of a 4-month history of increasing neck pain and muscular weakness of the left extremities. Magnetic resonance imaging (MRI) of the cervical spine demonstrated an IDEM tumor with spinal cord compression. At the time of surgery, an encapsulated IDEM tumor without a dural attachment or medullary infiltration was noted, but the tumor capsule adherent to the spinal cord and root was left in place to minimize the risk of neurological sequelae. Histologic examination revealed a benign classic ependymoma. The post-operative course was uneventful and radiotherapy was performed. The patient showed an excellent clinical recovery, with no recurrence after 5 years of follow-up.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.132-135
• /
• 1996

This study is to develop an ammonia based chemical heat pump(STELF) for a freezing and refrigeration system coupled to gas, fuel and/or waste from industrial processes as heat sources. Recently it has been continually taking a growing interest in chemical heat pumps without electric power and having higher COP's than those of existing compression type refrigeration systems using freon. By introducing STELF technology, efficient heat recovery utilizing enormous amount of waste heat in energy consuming large scale industries or building for their own refrigeration purposes is possible. Moreover, air-conditioning systems coupled to city gas for small scale industries or building can be realized. Therefore, STELF technology can contribute much for overall energy savings and efficient energy management.