• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.533-540
• /
• 2004

This paper proposes a new multispectral image data compression algorithm that can efficiently reduce spatial and spectral redundancies by applying classified prediction, a Karhunen-Loeve transform (KLT), and the three-dimensional set partitioning in hierarchical trees (3-D SPIHT) algorithm in the wavelet transform (WT) domain. The classification is performed in the WT domain to exploit the interband classified dependency, while the resulting class information is used for the interband prediction. The residual image data on the prediction errors between the original image data and the predicted image data is decorrelated by a KLT. Finally, the 3-D SPIHT algorithm is used to encode the transformed coefficients listed in a descending order spatially and spectrally as a result of the WT and KLT. Simulation results showed that the reconstructed images after using the proposed algorithm exhibited a better quality and higher compression ratio than those using conventional algorithms.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.3
• /
• pp.11-18
• /
• 2009

In this paper, we introduce a novel method to extend the JPEG standard, which is the most widely used for lossy image compression, in order to improve compression ratio. To employ two of the most successful methodologies for the data compression: differential coding and quantization simultaneously, we propose a line-based approach. For each line in a block, we apply one-dimensional discrete cosine transformation to the increments instead of the pixel values. Those values are quantized and entropy-coded similarly to the JPEG standard. To further increase compression ratio, the proposed method is plugged into the JPEG standard to form a new compression method, in which the proposed method are applied to only selected JPEG blocks. In our experiment, we found that the proposed method outperform the JPEG standard when the qualities of the coded images are set to be high. We believe the proposed method can be simply plugged into the standard to improve its compression ratio for higher quality images.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.506-507
• /
• 1992

When it comes to the 'Leak Detector System' generally, our country has a large income 'Rotary Type Leak Detector' of foreign goods. The completed development of the 'Line Type Leak-Detector' system was produced to check Whether the containers for small and large on the filling line are auto defective. This system is applied to the filling package Processing during the production and contributed to inproving competiveness of domestic containers manufactures of all society of Industry. Also, high precision and realiablity, very compact size, low cost and Easy set-up etc. by checking the experimental data directly plan, Design and making for '1 Compression Head Control Leak Detector System'. This flexcible system can be equipped with multiple Compression heads depending on the requested prodution test rate and test precision.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.4
• /
• pp.292-298
• /
• 2017

The complexity of image compression algorithms has increased in order to improve image compression efficiency. One way to resolve high computational complexity is parallel processing. However, entropy coding, which is lossless compression, does not fit into the parallel processing form because of the correlation between consecutive symbols. This paper proposes a new application-specific instruction set processor (ASIP) platform by adding new context-adaptive binary arithmetic coding (CABAC) instructions to the existing platform to quickly process a variety of entropy coding. The newly added instructions work without conflicts with all other existing instructions of the platform, providing the flexibility to handle many coding standards with fast processing speeds. CABAC software is implemented for High Efficiency Video Coding (HEVC) and the performance of the proposed ASIP platform was verified with a field programmable gate array simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.128-139
• /
• 2000

Environmental concerns and shortage of petroleum have promoted considerable interest in the use of alternate fuels in stationary diesel engine. In this study, a heavy-duty, intercooler-turbocharged 6-cylinder stationary diesel engine was converted into stationary gas engine fueled with propane or natural gas for the cogeneration plants. One of the most important factors in the combustion features of a stationary gas engine is the fuel composition and operating parameters in terms of compression ratio, spark advance, and engine loads. Experiments with different fuel gas and load conditions were carried out with combustion pressure analysis and NOx measurement. Combustion analysis based on P-$\theta$ diagrams was also investigated by means of combustion duration and cycle variation. Compression ratio is 10.0 and ignition timing is set by using the gasoline setting as a base line and advanced toward BTDC. The results show that fuel composition and spark advance have dominant effects on combustion and NOx characteristics at operating conditions.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.36-42
• /
• 1997

This paper presents a new design technique for performing high quality low bit rate image compression. A hybrid coder(HC) which combines Mean Removed Important Coefficient Selection based JPEG(MR-ICS-JPEG) and Adaptive Vector Quantization (AVQ) is proposed. A new quantization table is developed using the Important Coefficient Selection(ICS) method; the importance of each coefficient is determined using the orthonormal property of the DCT. This quantization table is applied to standard JPEG with mean removal(MR) strategy before processing. This scheme, called MR-ICS-JPEG, produces more than 2 dB enhanced performance in terms of PSNR over standard JPEG. A set of homogeneous codebooks is generated by homogeneous training vectors. Before compression, an image is uniformly divided into 8${\times}$8 blocks. Low detail regions such as backgrounds are roughly coded by AVQ while high detail regions such as edges or curves are finely coded by the proposed MR-ICS-JPEG. This hybrid coder procuces consistently about 3 dB improved performance in terms of PSNR over standard JPEG.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.187-190
• /
• 2004

This paper proposes an efficient hardware implementation of SPIHT(Set Partitoning In Hierarchical Tree) algorithm for image compression with the discrete wavelet transform. An efficient technique to scan the coefficients which are located in partitioned spatial orientation trees by DWT is considered in terms of counter fields for sorting pass and refinement pass. The proposed image compression method using SPIHT has been modeled in VHDL and has been implemented by use of both TMS320C6000 as a DSP and Virtex2 as a Xilinx FPGA.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.209-211
• /
• 2015

Evaporation characteristics of a single droplet of carbon nanofluids were investigated in a rapid compression machine(RCM). n-Heptane and carbon black N990 were used to synthesize the carbon nanofluids. RCM is an experimental set-up to simulate a single compression stroke of reciprocating engine. Temperature and pressure in a reaction chamber were measured during the compression stroke. After the piston reaches top dead center(TDC), temperature and pressure decreased due to the heat loss at wall. In that process, a single droplet of carbon nanofluids underwent unsteady condition. A single droplet was put at the center of reaction chamber. Thermocouple whose tip is $50{\mu}m$ was used not only to measure transient bulk temperature, but also to suspend the droplet. The picture of single droplet was taken using high speed camera with a frame rate of 500 fps. From those pictures, the droplet diameter was measured by visual basic program.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.645-647
• /
• 2003

In this work a new method for on-line scene segmentation is developed. In remote sensing a scene is represented by the pixel-oriented features. It is possible to reduce data redundancy by an unsupervised segment-feature extraction process, where the segment-features, rather than the pixelfeatures, are used for multispectral scene representation. The algorithm partitions the observation space into exhaustive set of disjoint segments. Then, pixels belonging to each segment are characterized by segment features. Illustrative examples are presented, and the performance of features is investigated. Results show an average compression more than 25, the classification performance is improved for all classes, and the CPU time required for classification is reduced by the same factor.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.216-217
• /
• 2019

Light Field (LF) image can be understood as a set of images captured by a multi-view camera array at the same time. The changes among views can be modeled by a general motion model such as affine motion model. In this paper, we study the impact of affine coding tool of Versatile Video Coding (VVC) on LF image compression. Our experimental results show a small contribution by affine coding tool in overall LF image compression of roughly 0.2% - 0.4%.