• 융합신호처리학회논문지
• /
• 제6권3호
• /
• pp.107-111
• /
• 2005

멀티미디어 사용의 증가에 따라 정보화 사회에 있어 정지영상 정보를 높은 압축율로 방대한 데이터를 얼마나 빠르게 에러 없이 전송 또는 처리하는가 하는 문제가 요구되어지고 있다. 본 논문은 임베디드 시스템 환경의 정지영상 인코팅 분야에서 다양한 기능과 압축 성능을 보이고 있는 JPEG2000의 압축효율 향상을 위하여 양자화 전 단계에서 추출데이터를 축소시켜 EBCOT 단계로 전달되는 데이터의 양을 줄이는 방법으로, 웨이블렛 계수의 저주파 대역에 대한 부호화를 제거하여 부호화 과정에서의 sign bit를 줄이고, 중요도 판별과정에서 각 단계별 임계치를 설정하여 중복비트를 제거하는 분할 정렬 알고리즘을 이용하여 웨이블렛 계수를 줄이는 방법을 제안하였다. 실험결과, 제안한 방법을 통해 임베디드 환경아래에서 기존의 JPEG2000 표준보다 더 우수한 양질의 성능과 저 비트율을 확인할 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권2호
• /
• pp.135-150
• /
• 2006

Rubber material properties and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. This paper discusses the failure mechanism and material tests were carried out to predict the useful lifetime of NBR and EPDM for compression motor, which is used in refrigerator component. The heat-aging process leads not only to mechanical properties change but also to chemical structure change so called degradation. In order to investigate the aging effects on the material properties, the accelerated test were carried out. The stress-strain curves were plotted from the results of the tensile test for virgin and heat-aged rubber specimens. The rubber specimens were heat-aged in an oven at the temperature ranging from $70^{\circ}C\;to\;100^{\circ}C$ for a period ranging from 1 to 180 days. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot. By using the compression set test, several useful lifetime prediction equations for rubber material were proposed.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.95-102
• /
• 2020

Currently, peroxide cure is a widely used cure system for rubber materials. To improve its effectivity, co-agents are used to enhance the peroxide efficiency and mechanical properties of rubber materials. Co-agents are multifunctional organic compounds that are highly reactive towards free radicals. These co-agents provide higher cross-link densities for a given peroxide concentration and improve the mechanical properties of peroxide-cured rubber composites. In this study, trimethylolpropane trimethacrylate (TMPTMA) and high vinyl 1,2-polybutadiene (HVPBD) were used as co-agents. In order to obtain a concentration that achieves a favorable balance between mechanical properties and co-agent concentration, this research investigated the effects of co-agent content on the curing characteristics, chemical structures, and mechanical properties of HNBR composites. Additionally, the heat aging properties and compression sets of HNBR composites were investigated. Based on the results, we found that the HNBR composites with TMPTMA co-agents exhibited higher Shore A hardness and 10% modulus and better heat aging resistance and compression set than that of the HVPBD co-agent. The heat aging resistance and compression set deteriorated with increasing HVPBD content.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.59-66
• /
• 2019

Hollow steel-reinforced concrete-filled GFRP tubular member is a new kind of composite members. Firstly set the mold in the GFRP tube (non-bearing component), then set the longitudinal reinforcements with stirrups (steel reinforcement cage) between the GFRP tube and the mold, and filled the concrete between them. Through the axial compression test of the hollow steel-reinforced concrete-filled GFRP tubular member, the working mechanism and failure modes of composite members were obtained. Based on the experiment, when the load reached the ranges of $55-70%P_u$ ($P_u-ultimate$ load), white cracks appeared on the surface of the GFRP tubes of specimens. At that time, the confinement effects of the GFRP tubes on core concrete were obvious. Keep loading, the ranges of white cracks were expanding, and the confinement effects increased proportionally. In addition, the damages of specimens, which were accompanied with great noise, were marked by fiber breaking and resin cracking on the surface of GFRP tubes, also accompanied with concrete crushing. The bearing capacity of the axially compressed components increased with the increase of reinforcement ratio, and decreased with the increase of hollow ratio. When the reinforcement ratio was increased from 0 to 4.30%, the bearing capacity was increased by about 23%. When the diameter of hollow part was decreased from 55mm to 0, the bearing capacity was increased by about 32%.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.27-32
• /
• 2023

Liquid silicon rubber (LSR) has fine thermal compatibility and is widely used in various fields such as medical care and automobiles because it is easy to implement products with good fluidity. With the recent development of flexible sensors, the focus has been on manufacturing conductive elastomers, such as silicone as elastic materials, and carbon black, CNT, and graphene are mainly used as nanomaterials that impart conductive phases. In this study, mechanical behavior and curing behavior were measured and analyzed to manufacture a CB-LSR complex by adding Carbon Black to LSR and to identify properties. As a result of the compression test, the elastic modulus tended to increase as carbon black was added. When the swelling test and the compression set test were conducted, the swelling rate tended to decrease as the content of carbon black increased, and the compression set tended to increase. In addition, DSC measurements showed that the total amount of reaction heat increased slightly as the carbon black content increased. It is considered that carbon black was involved in the crosslinking of LSR to increase the crosslinking density and have a positive effect on oil resistance reinforcement.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.538-545
• /
• 2006

Stratified charge compression ignition (SCCI) combustion, also known as HCCI(homogeneous charge compression ignition), offers the potential to improve fuel economy and reduce emission. In this study, SCCI combustion was studied in a single cylinder gasoline DI engine, with a direct injection system. We investigated the effects of air-fuel ratio, intake temperature and injection timing such as early injection and late injection on the attainable SCCI combustion region. Injection timing during the intake process was found to be an important parameter that affects the SCCI region width. We also find it. The effects of mixture stratification and fuel reformation can be utilized to reduce the required intake temperature for suitable SCCI combustion under each set of engine speed and compression ratio conditions.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.17-24
• /
• 1995

본 논문은 iterated contractive transformations을 이용한 심전도 데이터 압축에 관한 새로운 방법을 제안한다. 이방법은 piecewise self-affine fractal interpolation(PSAFI)에 의해 심전도 신호의 임의 구간들을 표현한다. Piecewise self-affine fractal model은 자기자신의 수축적 유사 변환으로 구성된다고 볼 수 있는 이산 데이터에 사용된다. 제안된 알고리즘은 MIT/BIH arrhythmia 데이터베이스로 평가되었다. PSAFI는 주어진 압축율에서 기존의 직접 압축 방법보다 상대적으로 적은 재생 오차를 나타냈다. 샘플링 주파수는 400Hz이고 resolution은 12bits인 원래 신호에 대해 압축율이 883.9bps일때 평균재생오차(APRD)는 5.39%를 나타냈다.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1025-1030
• /
• 2005

멀티 미디어 사용의 증가에 따라 정보화 사회에 있어 정지 영상 정보를 높은 압축율로 방대한 데이터를 얼마나 빠르게 에러없이 전송 또는 처리 하는가 하는 문제가 요구 되어지고 있다. 본 논문은 정지영상 인코딩 분야에서 다양한 기능과 압축 성능을 보이고 있는 JPEG2000 압축효율 향상을 위하여 저주파 대역에 대한 부호화를 제거하고, 중복비트 제거를 이용한 개선된 분할정렬 알고리즘을 이용하여 웨이블렛 계수를 줄이는 방법을 제안하였다. 실험결과, 제안한 방법을 통해 기존의 JPEG2000 표준보다 더 우수한 양질의 성능과 저 비트율을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제27권4호
• /
• pp.247-254
• /
• 1992

The purpose of this dissertation is to study the vulcanization characteristics, compression set and other physical properties of NBR vulcanizates according to the various plasticizer and its content. Vulcanization characteristics were investigated by using cure that has obtained by means of rheometer and Mooney viscometer. The result of physical properties, vulcanization characteristics are as fellows. 1. The results of test for optimum cure time in vulcanization characteristics of NBR compounds indicated the rapidity of scorch time according to the increase of amounts of plasticizer. 2. In the test of compression set property, LCR was the best effect. 3. In the test of oil resistance, LCR was the best effect.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.89-95
• /
• 2002

VRML data, which is mainly structural element, is frequently used for modeling and visualizing 3D objects. Although there can be variations, it is a usual practice to represent 3D shapes in VRML format. Ever since the advent of Internet, there have been strong needs to transfer shape data through Internet. Because of this need, it is necessary to transform a data file in VRML or similar format into a more convenient form to transfer through the network. In a VRML file, a model is sometimes divided into a set of triangle meshes due to several practical reasons. However, this causes various demerits for the fast transmission. Therefore, it is more efficient to merge the mesh sets into one mesh set for the transmission. In this paper, we present the problems in the merge process and the techniques to handle the situation.