• Computers and Concrete
• /
• 제2권2호
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.445-448
• /
• 2005

Recently, injection molding process became more popular than ever to produce large quantities of high precision products or optical products. Injection molding products can cause sensorial problems because of high birefringence or deformation from the residual stresses in the optical media. In the present study, we have focussed on the effect of holding and compression pressures on the optical anisotropy remaining in the MOD by examining the gapwise distribution of birefringence and extinction angle The effect of holding pressure was found to form the inner two birefringence peaks. But the effect of compression pressure on the birefringence distribution was found to make the uniform distribution near the center in the gap-wise direction. Finally, the value of the birefringence near the wall decreased as the mold temperature increased.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.34-43
• /
• 1996

In this study basic equations of fiber orientations is cimpared with experimental results. It is found that fiber orientations of short fiber reinforced polymeric composite under compression molding are governed by slope of flow speed in x-y direction. Fiber orientation angle of mold is also found to increase with closure speed and the compression ratio. At the middle of the mold, the slope of flow speed is larger in x-direction than in y-direction. At the wall of the mold, the shope of flow speed in y-direction occurs due to the effect of friction, hence affects the fiber orientation. The effect of partial flow, which incurs y-direction orientation causes to increase the fiber orientation angle at the fore part of the flow.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.341-345
• /
• 2021

1D sand compression response to ko-loading experiences volume contraction from low to high effective stress regimes. Previous study suggested compressibility model with physically correct asymptotic void ratios at low and high stress levels and examined only for both remolded clays and natural clays. This study extends the validity of Enhanced Terzaghi model for different sand types complied from 1D compression data. The model involved with four parameters can adequately fit 1D sand compression data for a wide stress range. The low stress obtained from fitting parameters helps to identify the initial fabric conditions. In addition, strong correlation between compressibility and the void ratio at low stress facilitates determination of self-consistent fitting parameters. The computed tangent constrained modulus can capture monotonic stiffening effect induced by an increase in effective stress. The magnitude of tangent stiffness during large strain test should not be associated with small strain stiffness values. The use of a single continuous function to capture 1D stress-strain sand response to ko-loading can improve numerical efficiency and systematically quantify the yield stress instead of ad hoc methods.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 추계학술대회
• /
• pp.112-115
• /
• 2022

The process of deep learning usually needs to deal with massive data which has greatly limited the development of deep learning technologies today. Convolutional Neural Network (CNN) structure is often used to solve image classification problems. However, a large number of images may be required in order to train an image in CNN, which is a heavy burden for existing computer systems to handle. If the image data can be compressed under the premise that the computer hardware system remains unchanged, it is possible to train more datasets in deep learning. However, image compression usually adopts the form of lossy compression, which will lose part of the image information. If the lost information is key information, it may affect learning performance. In this paper, we will analyze the effect of image compression on deep learning performance on CNN-based cat and dog classification. Through the experiment results, we conclude that the compression of images does not have a significant impact on the accuracy of deep learning.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.63-78
• /
• 1999

압축형 앵커의 설계를 위해서는 세가지의 조건이 고려되어져야 한다. 그 첫째가 주면마찰저항력이고, 둘째가 강선의 인장강도이고, 셋째가 그라우트의 압축강도이다. 특히, 세가지 조건 중에서도 그라우트의 압축강도는 압축형 앵커의 인발력 산정에 있어서 가장 중요한 매개변수가 된다. 압축형 앵커가 지중에서 인발될 때, 그라우트의 압축강도는 지반 구속압에 의해 증가하게 된다. 이 지반 구속압은 정지 토압에 의한 구속압과 "포아송 효과"라고 부르는 횡방향 팽창에 의해 증가되는 구속압으로 이루어져 있다. 본 논문에서는 압축형 앵커인 SSC 앵커의 내하체 압축시험을 통해 앵커 설계법을 제안하고, 이 설계법을 사용하여 앵커의 인발저항력을 계산하는 컴퓨터 프로그램을 개발하였다.그램을 개발하였다.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.47-53
• /
• 1999

The effect of coating of liner components with oxidized starch on the properties of corrugated box was examined . Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) , and corrugated box was made from the treated corrugated board. Box was made in a regular slotted container (RSC) style, and box compression strength was determined in the direction of top-to-bottom compression. The compression strength of box coated on outside liner component showed 15.4% improvement for 1.58g㎡ coating. On the other hand, the strength of box coated on outside liner component showed only 1.45% improvement for 1.41g/㎡ coating and 3.46% improvement for 2.32g/㎡ coating. Coating on inside liner component with oxidized starch at low coating weight more significantly improved box compression strength than coating on outside liner component, and the improvement was marked at the coating weight of 1.5-2.5g/㎡. In estimating top-to-bottom box compression strength, the experimental values were closer to the calculated values from McKee's equation suing edgewise compression strength of the combined board measured by column crush test than those from Kellicutt's equation using compression strength of component paperboards measured by ring crush test.

• 한국분무공학회지
• /
• 제22권2호
• /
• pp.69-79
• /
• 2017

When designing a redox flow battery system, compression of battery stack is required to prevent leakage of electrolyte and to reduce contact resistance between cell components. In addition, stack compression leads to deformation of the porous carbon electrode, which results in lower porosity and smaller cross-sectional area for electrolyte flow. In this paper, we investigate the effects of electrode compression on the cell performance by applying multi-dimensional, transient model of all-vanadium redox flow battery (VRFB). Simulation result reveals that large compression leads to greater pressure drop throughout the electrodes, which requires large pumping power to circulate electrolyte while lowered ohmic resistance results in better power capability of the battery. Also, cell compression results in imbalance between anolyte and catholyte and convective crossover of vanadium ions through the separator due to large pressure difference between negative and positive electrodes. Although it is predicted that the battery power is quickly improved due to the reduced ohmic resistance, the capacity decay of the battery is accelerated in the long term operation when the battery cell is compressed. Therefore, it is important to optimize the battery performance by taking trade-off between power and capacity when designing VRFB system.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.561-566
• /
• 2005

This paper introduces a compression technique for power qualify disturbance signal via discrete wavelet transform(DWT). The proposed approach is based on a previous estimation of the stationary component of power quality disturbance signal, so that it could be subtracted from the original signal in order to reduce a dynamic range of signal and generate transient events signal, which is subsequently applied to the compression technique. The compression techniques is performed through the difference signal decomposition, thresholding of wavelet coefficients, and signal reconstruction. It presents the relation between compression efficiency and threshold. It shouts that the wavelet transform leads to a power quality data compression approach with high compression efficiency, small compression error and good de-nosing effect.

• 한국포장학회지
• /
• 제12권2호
• /
• pp.103-108
• /
• 2006

In order to determine safety factor of corrugated fiberboard boxes for agricultural products, relationship with effect of relative humidity and structure of box types must be defined. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength of corrugated boards with increasing relative humidity of environment. 2. Compression strength of corrugated boards were decreased rapidly after the relative humidity was over 70 percent. 3. Compression strength of corrugated board boxes were greatly depending on the box types. Folder type showed the best performance at higher humidity environment while bliss type was the worst. 4. Further studies are needed in order to expect box compression strength in real distribution environment.