• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.949-954
• /
• 2013

일반적으로 압축을 받는 판 구조는 종방향 보강재를 이용하여 보강된다. 이 때 보강재로서 U형 단면 리브를 사용하는 것이 보다 효과적이나, 현재 국내에서 이에 대한 명확한 설계지침이나 연구자료가 제시되지 못하고 있다. 이에, 본 연구에서는 U리브의 단면 크기 및 강성 등에 따른 보강판의 탄성좌굴강도를 살펴보고자 한다. 유한요소해석 프로그램인 ABAQUS를 이용하여 세 가지 타입의 U형 단면 리브를 적용한 해석모델을 수립하여 고유치 해석을 실시하였고, 양연지지된 판의 국부좌굴강도 이론식과 본 해석적 결과를 비교하였다. 이러한 분석 결과를 토대로 U형 단면리브에 의해 좌굴강도가 증진하는 보강 효과를 확인하였으며, 설계 파라미터에 따른 변수해석적 연구를 통해 그 영향을 분석하였다. 본 연구결과는 U리브 보강판의 적정 설계 방안을 제시하는데 기여할 수 있을 것으로 기대된다.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.171-185
• /
• 2001

The design of tall buildings has recently provided many challenges to structural engineers. One such challenge is to minimise the cross-sectional dimensions of columns to ensure greater floor space in a building is attainable. This has both an economic and aesthetics benefit in buildings, which require structural engineering solutions. The use of high strength steel in tall buildings has the ability to achieve these benefits as the material provides a higher strength to cross-section ratio. However as the strength of the steel is increased the buckling characteristics become more dominant with slenderness limits for both local and global buckling becoming more significant. To arrest the problems associated with buckling of high strength steel, concrete filling and encasement can be utilised as it has the affect of changing the buckling mode, which increases the strength and stiffness of the member. This paper describes an experimental program undertaken for both encased and concrete filled composite columns, which were designed to be stocky in nature and thus fail by strength alone. The columns were designed to consider the strength in axial compression and were fabricated from high strength steel plate. In addition to the encased and concrete filled columns, unencased columns and hollow columns were also fabricated and tested to act as calibration specimens. A model for the axial strength was suggested and this is shown to compare well with the test results. Finally aspects of further research are addressed in this paper which include considering the effects of slender columns which may fail by global instabilities.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2263-2271
• /
• 2015

압축력을 받는 얇은 원통형 쉘 구조물은 좌굴에 대한 안정성을 검토해야 한다. 좌굴에 대한 검토 시, 좌굴강도에 민감한 영향을 미치는 초기결함에 대한 중요성은 많은 선행연구에서 언급하였으나 다양한 초기결함의 영향성을 반영 할 수 있는 좌굴강도 연구가 필요하다. Eurocode에서 제시하고 있는 초기결함의 영향성을 반영하는 설계 계수 ${\alpha}$의 경우도 단면의 두께로 결정되는 특정 초기결함만을 포함하고 있어 다양한 초기결함에 대한 좌굴강도를 예측하기 어렵다. 본 논문에서는 초기결함의 영향성을 보기 위해 초기결함의 크기를 변화시켜가며 휨을 받고 있는 원통형 단면의 좌굴강도를 기하 재료비선형 해석을 통해 얻어내었다. FEM해석을 통하여 다양한 초기결함을 반영할 수 있는 수정된 ${\alpha}^{\prime}$을 제안하여 보다 합리적인 원통형 휨 좌굴강도를 계산할 수 있는 방법을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.1017-1036
• /
• 2014

Steel tubes have an efficient shape with large second moment of inertia relative to their light weight. One of the main problems of these members is their low buckling resistance caused from having thin walls. In this study, steel foams with high strength over weight ratio is used to fill the steel tube to beneficially modify the response of steel tubes. The linear eigenvalue and plastic collapse FE analysis is done on steel foam filled tube under pure compression and three point bending simulation. It is shown that steel foam improves the maximum strength and the ability of energy absorption of the steel tubes significantly. Different configurations with different volume of steel foam and composite behavior is investigated. It is demonstrated that there are some optimum configurations with more efficient behavior. If composite action between steel foam and steel increases, the strength of the element will improve, in a way that, the failure mode change from local buckling to yielding.

• 한국강구조학회 논문집
• /
• 제29권4호
• /
• pp.281-289
• /
• 2017

현재의 AASHTO LRFD 및 Eurocode 3 기준은 수평보강 플레이트거더의 휨강도를 과소 평가하는 것으로 나타났다. 이는 웨브보강으로 인한 웨브-플랜지 상호작용을 적절히 고려치 않는 것에 그 원인이 있다. 즉, 웨브 보강 시 압축플랜지의 회전을 구속하는 효과가 증가하여 압축플랜지의 좌굴강도가 증가한다. 또한 압축플랜지와 수평보강재가 웨브의 회전을 구속함으로써 웨브의 일정 영역이 항복강도에 도달하게 된다. 본 연구에서는 수평보강재로 1단 보강된 플레이트 거더에 대해 압축플랜지의 좌굴강도 증가와 웨브의 실제 응력분포를 고려하여 휨강도를 합리적으로 평가하기 위한 모델을 제안하였다. 일반강(SM490) 및 고강도강(HSB800) 플레이트거더에 대해 비선형해석으로부터 휨강도를 평가하고 본 제안 모델의 적용성을 분석하였다.

• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.141-146
• /
• 1995

본 연구에서는 2축 방향의 압축/인장 하중을 받는 단순지지된 평판에 대하여 소성 압축성을 고려한 소성좌굴해석을 수행하였다. 2축하중을 받는 직사각형 평판의 소성 좌굴은 두개의 기계역학적 개념에 의해 지배를 받는데, 인장 강화와 소성 열화가 그것으로 인장과 압축이 적절히 결합함으로써 좌굴강도를 결정할 수 있게 된다. 소성 압축성을 고려하기 위해, Drucker-Prayer의 소성 포텐셜이론을 택하였다. 소성 변형률이 작을 때와 재질의 등방성 경화만을 가정하면 직사각형 평판에 관한 일반적인 고유방정식을 유도할 수 있게 된다.

• 대한조선학회지
• /
• 제21권2호
• /
• pp.19-27
• /
• 1984

An extension of the finite element method to the stability analysis of shells of revolution under static axisymmetric loading is presented in this paper. A systematic procedure for the formulation of the problem is based upon the principle of virtual work. This procedure results in an eigenvalue problem. For solution, the shell of revolution is discretized into a series of conical frusta. The buckling mode in the circumferential direction is assumed, this assumption makes the problem economical for the computing time. The present method is applied to a number of shells of revolution, under axial compression or lateral pressure, and comparision are made with other theoretical results. The results show good agreement each other. The effects of aspect ratio, boundary conditions and buckling modes on the buckling strength of shells of revolution are studied. Also the optimum shape of cylindrical shell under uniform axial compression is obtained from the view point of structural stability.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1089-1096
• /
• 2005

This study was experimental test of edgewise compression properties for aluminum(type-50XX) sandwich panel with thermal environment and surface treatment using adhesive film. There was decreasing $10\%-peel$ strength after thermal environment. Through compressive. buckling mode know to seen of properties of adhesive, sheet and core strength. First case of Chromate to aluminum sheet, know low shear strength of adhesive through buckling mode but case of Beomite to aluminum sheet, know than thin sheet and core low strength through buckling mode.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.129-140
• /
• 2023

To increase the stiffness and strength of a reinforced concrete shear wall, steel plates are bolted to the sides of the wall. The general behavior of a composite concrete-steel shear wall is dependent on the buckling of the steel plates that should be prevented. In this paper, the unilateral buckling of steel plates of a composite shear wall is studied using the Rayleigh-Ritz method. To model the unilateral buckling of steel plate, the restraining concrete wall is described as an elastic foundation with high stiffness in compression and zero stiffness in tension. To consider the effect of bolt connections on the plate's buckling, a constrained optimization problem is solved by using Lagrange multipliers method. This process is used to obtain the critical elastic local buckling coefficients of unilaterally-restrained steel plates with various numbers of bolts, subjected to pure compression, bending and shear loading, and the interaction between them. Using these results, the spacing between shear bolts in composite steel plate shear walls is estimated and compared with the results of the AISC seismic provisions (2016). The results show that the AISC seismic provisions(2016) are overly conservative in obtaining the spacing between shear bolts.