• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.95-104
• /
• 2002

Densification behavior of aluminum alloy(A16061) powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. A special form of the Cap model was proposed from experimental data of A16061 powder under triaxial compression. The proposed yield function and several yield functions in the literature were implemented into a finite element program (ABAQUS) to compare with experimental data for densifcation behavior of A16061 powder under cold isostatic pressing and die compaction. The agreement between finite element calculations from the proposed yield function and experimental data is very good under cold isostatic pressing and die compaction.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1242-1248
• /
• 2006

Densification behavior of nanocrystalline titania powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. Lee and Kim proposed the Cap model by developing the parameters involved in the yield function of general Cap model and volumetric strain evolution under cold isostatic pressing. The parameters in the Drucker/Prager Cap model and the proposed model were obtained from experimental data under triaxial compression. Finite element results from the models were compared with experimental data for densification behavior of nanocystalline ceramic powder under cold isostatic pressing and die compaction. The proposed model agreed well with experimental data under cold compaction, but the Drucker/Prager Cap model underestimated at the low density range. Finite element results, also, show the relative density distribution of nanocystalline ceramic powder compacts is severe compared to conventional micron powder compacts with the same averaged relative density.

• Structural Engineering and Mechanics
• /
• 제12권3호
• /
• pp.231-248
• /
• 2001

The three-dimensional behavior of confined concrete was investigated, including strength enhancement due to triaxial compressive stresses, lateral expansion, compression softening, cover spalling and post-peak ductility. A finite element program based on a nonlinear elasticity methodology was employed to evaluate the ability to model triaxial behavior of reinforced concrete (RC) by combining constitutive models proposed by several researchers. The capability of compression field based models to reproduce the softening behavior of lightly cracked confined concrete was also investigated. Data from tested specimens were used to evaluate the validity of the formulations. Good agreement with the experimental results was obtained.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.27-32
• /
• 2023

Liquid silicon rubber (LSR) has fine thermal compatibility and is widely used in various fields such as medical care and automobiles because it is easy to implement products with good fluidity. With the recent development of flexible sensors, the focus has been on manufacturing conductive elastomers, such as silicone as elastic materials, and carbon black, CNT, and graphene are mainly used as nanomaterials that impart conductive phases. In this study, mechanical behavior and curing behavior were measured and analyzed to manufacture a CB-LSR complex by adding Carbon Black to LSR and to identify properties. As a result of the compression test, the elastic modulus tended to increase as carbon black was added. When the swelling test and the compression set test were conducted, the swelling rate tended to decrease as the content of carbon black increased, and the compression set tended to increase. In addition, DSC measurements showed that the total amount of reaction heat increased slightly as the carbon black content increased. It is considered that carbon black was involved in the crosslinking of LSR to increase the crosslinking density and have a positive effect on oil resistance reinforcement.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.19-28
• /
• 2006

There has been considerable research in recent times in light-timber med structures in fires. These structures have included horizontal (floor-like) panels in bending and walls under eccentric and approximately concentric vertical loading. It has been shown that compression properties are the most dominant mechanical properties in affecting structural response of these structures in fire. Compression properties have been obtained by various means as functions of one variable only, temperature. It has always been expected that compression properties would be significantly affected by moisture and stress, as well. However, these variables have been largely ignored to simplify the complex problem of predicting the response of light-timber framed structures in fire. Full-scale experiments on both the panels and walls have demonstrated the high level of significance of moisture and stress for a limited range of conditions. Described in this paper is an overview of these conditions and experiments undertaken to obtain compression properties as a functions of moisture, stress and temperature. The experiments limited temperatures to $20{\sim}100^{\circ}C$. At higher temperatures moisture vaporizes and moisture and stress are less significant. Described also is a creep model for wood at high temperatures.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1249-1255
• /
• 2018

High temperature compression tests for newly developed Al-Zn-Mg alloy were carried out to investigate its hot deformation behavior and obtain deformation processing maps. In the compression tests, cylindrical specimens were deformed at high temperatures ($300-500^{\circ}C$) and strain rates of 0.001-1/s. Using the true stress-true strain curves obtained from the compression tests, processing maps were constructed by evaluating the power dissipation efficiency map and flow instability map. The processing map can be divided into three areas according to the microstructures of the deformed specimens: instability area with flow localization, instability area with mixed grains, and stable area with homogeneous grains resulting from continuous dynamic recrystallization (CDRX). The results suggest that the optimal processing conditions for the Al-Zn-Mg alloy are $450^{\circ}C$ and a strain rate of 0.001/s, having a stable area with homogeneous grains resulting from CDRX.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.9-18
• /
• 1996

실험실에서 재 성형한 정규압밀점토에 대하여 실시된 일련의 삼축압축시험 거동결과를 등방단일경화구성모델에 의한 예측치와 비교검토한다. 이 모델사용에 필요한 열한개의 계수는 등방압밀공시체에 대한 비배수삼축압축시험 결과로부터 간단히 결정된다. 이렇게 결정된 계수를 활용한 이 모델로 이방압밀공시체를 대상으로 한 비배수삼축압축시험시의 응력-변형률 및 간극 수압의 거동이 예측된다. 또한 등방압밀공시체 및 이방압밀공시체를 대상으로 실시한 배수삼축 압축시의 응력-변형률 및 체적변형률 거동예측에도 이 모델을 적용하였다. 예측치와 시험치의 비교결과 비배수삼축압축시험의 경우는 등방압밀공시체와 이방압밀공시체 모두에 좋은 일치를 보이고 있다. 그러나 배수삼축압축시험의 경우는 초기 체적변형률의 예측치가 시험치보다 약간 작게 나타나다가 파괴점에 근접함에 따라서는 예측치가 시험치보다 커지는 경향을 보이고 있다. 그러나 전반적인 응력 -변형률거동은 좋은 일치를 보이고 있음을 알 수 있다. 따라서, 본 연구결과 이 모델은 정규압밀점토의 거동예측에 적용성이 충분히 있다고 생각된다.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.907-929
• /
• 2022

Compression experiments were conducted to investigate the compressive behavior of built-up open-section columns consisting of four cold-formed steel channels (BOCCFSs) of different lengths, thicknesses, and cross-section sizes (OB90 and OB140). The load-displacement curves, failure modes, and maximum compression strength values were analyzed in detail. The tests showed that the failure modes of the OB90 specimens transformed from a large deformation concentration induced by local buckling to flexural buckling with the increase in the slenderness ratio. The failure modes of all OB140 specimens were deformation concentration, except for one long specimen, whose failure mode was flexural buckling. When the slenderness ratios of the specimens were less than 55, the failure modes were controlled by local buckling. Finite element models were built using ABAQUS software and validated to further analyze the mechanical behavior of the BOCCFSs. A parametric study was conducted and used to explore a wide design space. The numerical analysis results showed that when the screw spacing was between 150 mm and 450 mm, the difference in the maximum compression strength values of the specimens was less than 4%. The applicability and effectiveness of the design methods in Chinese GB50018-2002 and AISI-S100-2016 for calculating the compression strength values of the BOCCFSs were evaluated. The prediction methods based on the assumptions produced predictions of the strength that were between 33% to 10% conservative as compared to the tests and the finite element analysis.

• 한국추진공학회지
• /
• 제18권4호
• /
• pp.61-66
• /
• 2014

본 연구의 흑연은 로켓 노즐목 재료로 많이 사용되는 것으로써 온도, 가공성 및 무게 측면에서 유리하다. 하지만 고온 및 고압상태에서 고속으로 취성파괴 되므로 설계 시 구조적 안정성을 충분히 확보해야 한다. 본 연구에서는 로켓 노즐목에 이용되는 ATJ 흑연의 압축 파괴 거동에 대해 연구했다. 상온 및 고온에서 ASTM C 695에 준하여 일축 압축 시험을 수행하였다. 또한 시편의 단면적 변화에 의한 압축강도 및 파단특성을 분석하였다.

• 농업과학연구
• /
• 제23권2호
• /
• pp.233-241
• /
• 1996

The mechanical properties of biological materials depend on numerous factors. The majority of these relationships are still unknown today, especially with regard to their quantitative characteristics. The reason is that biological materials constitute biomechanical systems of very complex construction, whose behavior cannot be characterized by simple physical constants, as for example can that of engineering materials. The objectives of this investigation were to determine the compression creep and recovery properties of rice stalks at various levels of applied load The compression creep and recovery behavior of the rice stalk could be predicted precisely by rheological model which approached closely to the measured values. But the coefficients of the Burgers recovery model were different from those of the creep model. The Steady state creep behavior occurred at the higher level of force and the logarithmic creep behavior occurred at the lower level of force. The mechanical model being expected the creep behavior in relation with the level of applied load, which was well explained that the rice stalk might be visco-elastic material.