• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.21-27
• /
• 2015

현행 배기가스규제인 유로6을 대응하기 위해선 질소산화물과 메탄의 배출량을 크게 저감시켜야 하는 실정이다. 본 연구에서는 부분부하운전조건에서 밸브오버랩 감소가 수소-천연가스엔진의 연소 및 배기특성에 미치는 영향을 살펴보았다. 각 연료와 기존캠 및 밸브오버랩이 감소된 변경캠에 대하여 연소 및 배기특성을 분석하였다. 실험결과 변경캠을 사용하였을 때 열효율이 감소하고 연료유량이 증가하였다. 열효율 감소로 인하여 메탄과 이산화탄소의 배출량은 증가하였다. 희박한 운전조건에서 질소산화물 배출량은 기존캠 대비 감소하였다. 동일한 연료 및 운전조건에서는 효율과 배기특성에 악영향을 미치는 것을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제13권1호
• /
• pp.90-99
• /
• 2002

In order to utilize hydrogen energy in a large-scale in the future, development of effective hydrogen storage method is essentially required as well as that of efficient hydrogen production method. The hydrogen storage method using metal hydrides has been holding the spotlight as a safer and higher-density hydrogen storage method than conventional hydrogen storage methods such as liquid hydrogen or compressed hydrogen storage method. However when metals react with hydrogen to store hydrogen as metal hydrides, they undergo exothermic reactions, while metal hydrides evolve hydrogen by endothermic reaction. Therefore, hydrogen storage tank should have such structure that it can absorb or release reaction heat rapidly and efficiently. In this study, a review on the improvement of the heat release and absorption structure in the hydrogen storage tank was conducted, and as a result, a new type of hydrogen storage tank with the structure of vertical-type wall was designed and manufactured. Experimental results showed that this new type of tank could be used as an efficient hydrogen storage tank because its structure is simpler and manufacture is easier than cup-type hydrogen storage tank with the structure of packed horizontal cup.

• 한국가스학회지
• /
• 제23권6호
• /
• pp.74-80
• /
• 2019

수소를 고압으로 압축하여 사용하는 수소충전소는 안전 확보를 위해 설비간의 안전거리를 규정하고 있다. 수소 충전소에서 발생하는 사고 중 대부분의 사고는 누출사고이며, 누출 시 점화로 인해 제트화염이 생성된다. 고압의 수소 누출로 인한 가스 확산 및 제트화염의 해석은 안전거리 설정에 가장 중요한 요소이다. 본 연구에서는 고압의 환경에서 운용되는 수소충전소에서 발생할 수 있는 누출사고를 대비한 안전관리 규정 도출을 위하여 누출원 크기별 누출조건을 모사하고 위험거리 등을 파악하여 향후 안전기준 제정 시 참고자료로 활용하고자 한다.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.78-83
• /
• 2024

The development of eco-friendly alternative energy sources has become a global priority owing to the depletion of fossil fuels and an increase in environmental concerns. Hydrogen energy has emerged as a promising clean energy source, and hydrogen compressors play a crucial role in the storage and distribution of compressed hydrogen. However, harsh operating conditions lead to the rapid deterioration of conventional lubricants in hydrogen compressors, thereby necessitating the development of advanced lubrication technologies. This study introduces micrometer-sized silicone rubber powders as lubricant additives to enhance the lubrication performance of hydraulic oils in hydrogen compressors. We prepare silicone rubber powders by varying the ratio of the silicone rubber base to the curing agent and investigate their effects on interfacial properties, friction behavior, and wear characteristics. The findings reveal that the incorporation of silicone rubber powders positively influences the surface affinity, wettability, friction reduction, and wear resistance of the lubricants on the 304SS substrate. Moreover, we identify the optimal lubricant formulations, with a 15:1 ratio demonstrating the most effective friction reduction and a 5:1 ratio exhibiting the highest wear resistance. The controlled surface modification by the silicone rubber powder and the enhanced interfacial characteristics of the powder-containing lubricants synergistically contribute to the improved lubrication performance. These results indicate the potential of silicone rubber powder additives for the development of long-life lubrication solutions for hydrogen compressors and related applications, ultimately contributing to the advancement of sustainable energy technologies.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.383-386
• /
• 2007

This paper describes the design and integration of the wind- fuel cell hybrid system. The hybrid system components included a wind turbine, an electrolyzer (for generation of H2), a PEMFC (Proton Exchange Membrane Fuel Cell), storage system and BOP (Balance of Plant) system. The energy input is entirely provided by a wind turbine. A DC-DC converter controls the power input to the electrolyzer, which produces hydrogen and oxygen form water. The hydrogen used the fuel for the PEMFC. The hydrogen is compressed and stored in high pressure tank by hydrogen gas booster system.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.8-15
• /
• 2020

The government has announced its Hydrogen Economy Roadmap to strengthen global competitiveness on the hydrogen economy by focusing on hydrogen fuel cell electric vehicles and fuel cells. In this regard, the interest on the economics and safety of the infrastructure of hydrogen stations has also increased. In this study, a test bed similar to an actual hydrogen charging facility was built, and a prototype of a piston-type compressor was modeled. In this model, the piston was hydraulically compressed to progressively test leakage, leakage rate, and durability and to check for any malfunction. Moreover, the leakage rate, cylinder leak performance, and compressor operation durability were evaluated for safety; it was confirmed that there were no abnormalities. Nevertheless, an investigation of the long-term use and operating pressure of the compressor is necessary to verify the safety of developing a100-MPa domestic compressor in the future.

• 한국가스학회지
• /
• 제27권4호
• /
• pp.102-109
• /
• 2023

수소사회 실현에 있어 수요자가 수소를 가장 쉽게 만날 수 있는 시설인 수소충전소의 안전 확보가 중요하다. 수소충전소는 고압의 수소를 저장하는 압축가스설비 등으로 구성되어 있으며, 시설 내 수소 누출로 인한 화재폭발 또는 주변 화재의 영향으로 고압의 압축가스설비가 파열될 위험이 있다. 이에, 한국가스안전공사는 설치단계부터 위험요인을 찾아내 설계에 반영하고 법정 검사를 통한 안전 확보에 만전을 다하고 있다. 본 연구에서는 수소충전소에 설치하는 방호벽의 안전성 효과를 확인하기 위해 방호벽을 이용한 TNT 폭발 실증시험을 실시하고, CFD 프로그램인 FLACS-CFD를 이용하여 실증시험 결과와 비교·검증하였다. 실증시험 및 CFD 해석 결과 방호벽 후단에서 폭발 과압의 감소 효과가 위치에 따라 50 %에서 최대 90 %까지 감소하는 것이 확인되나, 일정거리를 벗어나면 그 효과가 떨어지는 것을 확인하였다. 방호벽의 안전성 검증을 위한 실증시험 및 전산해석 결과는 향후 방호벽 기준 최적화를 위한 제안에 활용하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.163-171
• /
• 2021

Securing energy sources is a key element essential to economic and industrial development in modern society, and research on renewable energy and hydrogen energy is now actively carried out. This research was conducted through experiments and analytical methods on the hydrogen filling process in the hydrogen storage tank of the hydrogen charging station. When low-temperature, high-pressure hydrogen was injected into a high-pressure tanks where hydrogen is charged, the theoretical method was used to analyze the changes in temperature and pressure inside the high-pressure tanks, the amount of hydrogen charge, and the charging time. The analysis was conducted in the initial vacuum state, called the First Cycle, and when the residual pressure was present inside the tanks, called the Second Cycle. As a result of the analysis, the highest temperature inside the tanks in the First Cycle of the high-pressure tank increased to 442.11 K, the temperature measured through the experiment was 441.77 K, the Second Cycle increased to 397.12 K, and the temperature measured through the experiment was 398 K. The results obtained through experimentation and analysis differ within ±1%. The results of this study will be useful for future hydrogen energy research and hydrogen charging station.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.151-157
• /
• 1999

The development of hydrogen vehicles has been actively progressed in the developed countries such as U. S., Japan and Germany. The most important technology of using hydrogen fuel is to develope a compatible storage tank with respect to the fossil fuel tank. Among many storage methods, the liquid hydrogen is the most desirable state because of the lowest volume and weight. The metal hydride tank is too heavy and the compressed hydrogen tank is too bulky. Because of these reasons, it is the principal purpose to analyze the theoretical heat transfer for designing and manufacturing an actual $LH_2$ tank. The insulation methods of the room between inner and outer vessel are non-vacuum, vacuum, vacuum with MLI(Multi-Layer Insulation). According to the results of the numerically calculated heat leak through the walls of the $LH_2$ tank, the vacuum insulated tank has 20 times and the MLI tank has 5616 times less heat leak than the non-vacuum tank.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2012

This paper presents a stress safety of a composite pressure cylinder for a hydrogen gas vehicle. The composite pressure cylinder in which is composed of an aluminum liner and carbon fiber wound layers contains 104 liter hydrogen gas, and is compressed by a filling pressure of 70 MPa. The FEM computed results are analyzed based on the US DOT-CFFC basic requirement for a hydrogen gas cylinder and KS B ISO specification. The FEM results indicate that the stress, 255.2 MPa of an aluminum liner is sufficiently low compared with that of 272 MPa, which is 95% level of a yield stress for aluminum. Also, the composite layers in which are wound on the surface of an aluminum cylinder are safe because the stress ratios from 3.46 to 3.57 in hoop and helical directions are above 2.4 for a minimum safety level. The proposed composite pressure cylinder wound by carbon fibers is useful for 70 MPa hydrogen gas vehicles.