• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.14-20
• /
• 2015

BACKGROUND: Contamination of source water by odorous compounds are one of the problems related to the water quality management, especially in Korea where surface water is used as drinking water. Geosmin (1, 10-trans-dimethyl-trans-9-decalol) and 2-MIB (2-methyl isoborneol : 1,2,7,7-tetramethyl-exo-bicycloheptan-2-ol) are commonly recognized earthy-musty odor compounds produced by algae causing serious problems to the drinking water purification facilities. METHODS AND RESULTS: In this study, spatial and temporal distribution of the odor compounds, geosmin and 2-MIB were investigated along with the development of phytoplankton in the Daechung reservoir from July 2012 to October 2013. CONCLUSION: Concentrations and frequencys of detection of both compounds increased from April to October which were related to cyanobacterial bloom periods. However, concentrations of odor compounds were not related to the number of cyanobacteria. Concentrations of both cyanobacteria and geosmin showed similar trends with depth. Pearson correlation analyses showed that geosmin concentration exhibited significant correlation with the count of Anabaena macrospora and Aphanizomenon flos-aquae. On the other hand, 2-MIB concentration showed a significant correlation with the count of Anabaena smithii.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.617-622
• /
• 2019

In order to develop a process for manufacturing a composite structure of an intermetallic compound foam and a hollow material, the firing and pore form of the Al-Ni precursor in a steel pipe are investigated. When the Al-Ni precursor is foamed in a hollow pipe, if the temperature distribution inside the precursor is uneven, the pore shape distribution becomes uneven. In free foaming, no anisotropy is observed in the foaming direction and the pore shape is isotropic. However, in the hollow pipe, the pipe expands in the pipe axis direction and fills the pipe. The interfacial adhesion between $Al_3Ni$ foam and steel pipe is excellent, and interfacial pore and reaction layer are not observed by SEM. In free foaming, the porosity is 90 %, but it decreases to about 80 % in the foam in the pipe. In the pipe foaming, most of the pore shape appears elongated in the pipe direction in the vicinity of the pipe, and this tendency is more remarkable when the inside pipe diameter is small. It can be seen that the pore size of the foam sample in the pipe is larger than that of free foam, because coarse pores remain after solidification of the foam because the shape of the foam is supported by the pipe. The vertical/horizontal length ratio expands along the pipe axis direction by foaming in the pipe, and therefore circularity is reduced.

• Elastomers and Composites
• /
• v.58 no.4
• /
• pp.161-172
• /
• 2023

Because particulate matter has emerged as a major contributor to air pollution, the tire industry has conducted studies to reduce particulate matters from tires by improving tire performance. In this study, we compared the conventional blending method, in which rubber, filler, and additives are mixed simultaneously, to the Y-blending method, in which masterbatches are blended. We manufactured carbon black (CB)-filled natural rubber (NR)/butadiene rubber (BR) blend and silica-filled epoxidized NR/BR blend compounds to compare the effects of the two blending methods on the physical properties of the compounds and the amount of particulate matter generated. The Y-blending method provided uniform filler distribution in the heterogeneous rubber matrix, improved processability, and exhibited low rolling resistance. This method also improved physical properties owing to the excellent filler-rubber interaction. The results obtained from measuring the generation of particulate matter indicated that, the Y-blending method reduced PM_2.5 particulate matter generation from the CB-filled and silica-filled compounds by 38% and 60%, and that of PM₁₀ by 29% and 67%, respectively. This confirmed the excellence of the Y-blending method regarding the physical properties of truck bus radial tire tread compounds and reduced particulate matter generated.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.63-80
• /
• 1999

This study presents NGDM(National Geospatial Information Distribution Model) in order to effectively utilize and differently apply geospatial information which is important in the dispersion of GIS. In order to establish the NGDM, this study draws the guideline of NGDM in Korea by analyzing its present condition of domestic and foreign geospatial information distribution. It also investigates some major factors forming the infrastructure of NGDM in regulative, technical, physical, and social aspects. Based on these factors, this study presents a three-staged NGDM that is applicable in Korea. The NGDM consists of four components that are the consumer, supplier, gateway for the clearinghouse and the clearinghouse of the geospatial information. According to the management form of geospatial information, the types of NGDM are classified as the concentration type, the distribution type, and compound type. Also, this study explains the mutual relationship between the NGDM's components and suggests a three-staged NGDM of planting, growth, and maturity period considering comparison results of classified models and development direction of regulation, protocol, communication network, electronic commerce, and etc.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.157-167
• /
• 2011

A numerical model was developed to predict the stage-discharge curve and lateral distribution of unit discharge in open channels with nonuniform cross section or compound open-channels. The governing equation is the one-dimensional momentum equation based on assumptions of the steady and uniform flow conditions in the longitudinal direction and the uniform water surface elevation in a cross section. Vegetative drag force term was included in governing equation in order to reflect the effect of floodplain vegetation on the flow characteristics. Finite element method was applied to obtain the numerical solution of the governing equation. Stage-discharge curve and lateral distribution of unit discharge for a given water surface are calculated based on input data, such as the cross sectional geometry, Manning's roughness coefficient, vegetative information and longitudinal slope of channel bed. The developed model was verified by comparing the calculated results with the observed data and the results of Darby and Thorne's(1996) model and the nonlinear k-$\epsilon$ model. The verified model was applied to estimate the upstream boundary conditions in two-dimensional flow model. The numerical results using laterally distributed unit discharge were compared with those obtained using uniformly distributed unit discharge in two-dimensional flow model.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.18-24
• /
• 1990

The location of inspection stations is a significant component of production systems. In this paper, a prototype expert system is designed for deciding the optimal location of inspection stations. The production system is defined as a single channel of n serial operation stations. The potential inspection station can be located after any of the operation stations. Nonconforming units are generated from a compound binomial distribution with known parameters at any given operation station. Traditionally Dynamic programming, Zero-one integer programming, or Non-linear programming techniques are used to solve this problem. However a problem with these techniques is that the computation time becomes prohibitively large when t be number of potential inspection stations are fifteen or more. An expert system has the potential to solve this problem using a rule-based system to determine the near optimal location of inspection stations. This prototype expert system is divided into a static database, a dynamic database and a knowledge base. Based on defined production systems, the sophisticated rules are generated by the simulator as a part of the knowledge base. A generate-and-test inference mechanism is utilized to search the solution space by applying appropriate symbolic and quantitative rules based on input data. The goal of the system is to determine the location of inspection stations while minimizing total cost.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.482-492
• /
• 2015

Ground-based measurements were conducted from January 6 to 12 of 2015 for understanding characteristics of nitrogen containing carbonaceous aerosols as 16 amino acids at the Mokpo National University, Korea. The detailed amino acid components such as Cystine ($(SCH_2CH(NH_2)CO_2H)_2$) and Methionine ($C_5H_{11}NO_2S$) and their sources were analyzed by High-Performance Liquid Chromatography with Fluorescence Detection (HPLC-FLD) for behavior of secondary products in particulate matter. In addition, organic carbon (OC) and elemental carbon (EC) based on the carbonaceous thermal distribution (CTD), which provides detailed carbon signature characteristics relative to analytical temperature, and water soluble organic carbon (WSOC) by total organic carbon (TOC) analyzer were used to understand the carbon compound behaviors. The backward trajectories were discussed for originations of carbonaceous aerosols as well. Different airmasses were classified with the amino acids and OC thermal signatures. The results can provide to understand the aging process influenced by the long-range transport from East Sea area.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.7-14
• /
• 2014

The core of the automotive industry's strategy to handle the climate change can be explained as the development and distribution of the vehicles with high fuel efficiencies and low emission. Clean Diesel, hydrogen fuel cell, electric, and especially hybrid power-train vehicles have been actively studied. This paper dynamically analyzes the performance of a hybrid system's five driving modes. The research subject consists of one engine, two electric motors, two simple planetary gears, and one compound planetary gears with five clutches. To define the steady state equation of the system, interaction formulas of five driving modes are introduced with motion variables and torque variables. These formulas are then used to analyze the speeds, torques, and power flows of each mode.

• Journal of Environmental Science International
• /
• v.22 no.12
• /
• pp.1615-1624
• /
• 2013

The aims of this study were to investigate and confirm the occurrence and distribution patterns of blood lipid lower agents (BLLAs) in Nakdong river basin (mainstream and its tributaries). 4 (atorvastatin, lovastatin, mevastatin and simvastatin) out of 5 statins and 2 (clofibric acid and zemfibrozil) out of 3 fibrates were detected in 29 sampling sites and simvastatin (>50%) was predominant compound followed by atorvastatin, lovastatin and clofibric acid. The total concentration levels of BLLAs on April, August and November 2009 in surface water samples ranged from ND~25.7 ng/L, ND~18.8 and ND to 38.8 ng/L, respectively. The highest concentration level of BLLAs in the mainstream and tributaries in Nakdong river were Goryeong and Jincheon-cheon, respectively. The sewage treatment plants (STPs) along the river affect the BLLAs levels in river and the BLLAs levels decreased with downstream because of dilution effects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.736-740
• /
• 2010

Nickel wires of 0.8 mm in diameter and 80 mm in length were electrically exploded in liquid media such as water, ethyl alcohol. The distribution of particle sizes was broad from a few micrometers to tens of nanometer. It was identified that the particles could be classified according to its sizes by using centrifugal separator. The powder prepared in distilled water showed mainly pure metallic Ni phase although a little oxide phase was observed. The powders prepared in ethyl alcohol showed complicated unknown phases, which is attributed to the compound of carbon in the organic liquid. This unknown phase was turned to pure metallic Ni phase after heat treatment.