• 대한화학회지
• /
• 제19권1호
• /
• pp.43-49
• /
• 1975

소량의 요오드 화합물이 윤활류에 함유될 때 금속표면사이의 마찰을 감소시키고 내마모성을 향상시키는데 이는 금속표면에 박층상구조의 이요오드화물이 형성되기 때문이라고 한다. 그러나 금속표면에서의 화학반응성, 마모와 극압실험 및 hot wire method에 의한 결과에 의하면 윤활기구는 이 요오드화물의 박층상 구조가 아니고 다른 기구에 의한 것임을 알았다. 유기 요오드화합물중에서 특히 N-iodopyridinium dichlorodate는 double charge transfer complex로써 다른 methyl iodide계의 화합물 보다 금속표면 사이의 마찰을 더욱 감소시키고 윤활기구는 interhalogen의 화학반응에 의한 것임을 알았다.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.696-700
• /
• 2002

The Ti-aluminide intermetallic compound was formed from high purity elemental Ti and Al foils by self-propagating, high-temperature synthesis(SHS) in hot press. formation of $TiAl_3$ at the interface between Ti and Al foils was controlled by temperature, pressure, heating rate, and so on. According to the thermal analysis, it is known in this study that the heating rate is the most important factor to form the intermetallic compound by this SHS reaction. The V layer addition between Al and Ti foils increased SHS reaction temperatures. The fully dense, well-boned inter-metallic composite($TiA1/Ti_3$Al) sheets of 700 m thickness were formed by heat treatment at $1000^{\circ}C$ for 10 hours after the SHS reaction of alternatively layered 10 Ti and 9 Al foils with the V coating layer. The phases and microstructures of intermetallic composite sheets were confirmed by EPMA and XRD.

• 한국표면공학회지
• /
• 제22권2호
• /
• pp.47-54
• /
• 1989

The effects of intermetallic compound growt on the sheet resistance and soldreability as functions of the aging time, the temperature, and the conditions of substrates have been investi-gated in the electroplallic compound (mainy Cu6Sn5and Ni3Sn4) and the number of phase interface increased, the sheet resistance increased. Spread tests showed that the solderability was dereased with the intermetallic compounds growth and increased with the thickness of electroplated Sn. The surface morphology or agin size of the compound layer singificantly affect the solderability. The solderability of Sn/Ni system was superiot to Sn/Ni system was sperior to that of Sn/Cu system and the intermetallic compounds growth was solwer in the former system.

• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.197-201
• /
• 1999

Antagonistic bacteria active against phytopathogenic fungi, Phytophthora capsici, Pythium ultimum, Rhizoctonia solani, Botrytis cinerea, and Fusarium oxysporum were isolated from greenhouse soils. An antifungal compound was extracted by ethyl acetate from acidified culture filtrate and purified through column chromatography and thin layer chromatography. Activity-guided bioassay was followed throughout the purification steps using Pythium ultimum as a test organism. The purified antifungal compound was identified as phenylacetic acid (PAA) based on the data obtained from IR, EI/MS, $^1H-NMR$, and $^{13}C-NMR$. Two different isolates, which had vast differences in differential characteristics except 16S rDNA sequence homology, produced the same compound, phenylacetic acid. $ED_{50}$ values of the phenylacetic acid against P. ultimum, P. capsici, R. solani, B. cinerea, and F. oxysporum were 45, 21, 318, 360, and 226 ppm, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제25권8호
• /
• pp.1257-1264
• /
• 2015

Trichoderma strain T-33 has been demonstrated to have inhibitory effect on the fungus species Cytospora chrysosperma. Here, an active antifungal compound was obtained from Trichoderma strain T-33 extract via combined separation technologies, including organic solvent extraction, liquid chromatography, and thin-layer chromatography. The purified compound was further characterized by advanced analytical technologies to elucidate its chemical structure. Results indicated that the active antifungal compound in Trichoderma strain T-33 extract is 2,5-cyclohexadiene-1,4-dione-2,6-bis (1,1-dimethylethyl).

• 분석과학
• /
• 제13권4호
• /
• pp.534-538
• /
• 2000

The title compound, $[Co(H_2O)_6](CH_3C_6H_4SO_3)_2$, has been prepared and characterized by X-ray crystallography. The crystal structure of the compound demonstrates a layered material constituted by hexaaquacobalt (II) cations and p-toluenesulfonate anions. Geometrical environment of the cobalt atom is octahedrally coordinated by water molecules. The p-toluenesulfonate anions are arranged with the sulfonate groups turned toward opposite side of the layer, alternately. The layered structure is stabilized by the hydrogen bondings between the ligated water molecules and the anionic sulfonate oxygen atoms.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.180-184
• /
• 1999

The insecticidal compound priduced by Streptomyces SS-4993 strain was indicated to be a relatively stable small compound by pancreatin treatment. The active compound was adsorbed on HP20 and eluted with 70% acetone. Then, the eluate was extracted with ethyl acetate. The content of the extract was determined by thin layer chromatography (Silica gel 60 F254, hexane-ethyl ether-acetic acid,80 : 20 :1). Three active bands (Rf 0.08, 0.07, 0.88) were identified by dermal application using Bombyx mori larvae. Electrophoretic analysis revealed that the injection of strain SS-4993 culture broth into B. mori larvae induce the reduction of the hemolymph proteins level. Especially, the level of apolipophorin-I was decreased drastically.

• BMB Reports
• /
• 제29권5호
• /
• pp.423-428
• /
• 1996

A superoxide anion radical scavenger isolated from Capsella bursa-pastoris was characterized by infrared (IR) spectroscopy, sugar analysis, ultraviolet (UV) spectroscopy, $^{1}H$ and $^{13}C$ nuclear magnetic resonance (NMR) spectroscopies, and fast atom bombardment (FAB) mass analysis. The compound was assumed to be a flavonoid-O-glycoside from IR spectrum and UV absorption maxima. When the sugar composition of the compound was examined by thin layer chromatography (TLC) and gas chromatography (GC) of the acid hydrolysate, only glucose was detected. According to the results of UV spectrotroscopy by using shift reagents, the compound was supposed to be luteolin (5,7,3',4'-tetrahydroxy flavone) or chrysoeriol (5,7,4'-trihydroxy-3'-methoxy flavone) with glucose. Based on $^{1}H$- and $^{13}C-NMR$ spectroscopies, the compound was deduced as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone. In FAB mass analysis the compound was finally characterized as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone ($C_{29}H_{34}O_{16}$, M.W.=638).

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.363-371
• /
• 2022

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

• 한국염색가공학회지
• /
• 제19권5호
• /
• pp.37-40
• /
• 2007

The electrostatic layer-by-layer technique provides a convenient way to control the construction of ultrathin films at nano-scale ranges and can be easily obtained. It can be also applicable to fiber substrate with dye compounds. We have fabricated multilayer dye films using diazonium resin and three couplers, which are prepared by self-assembly approach. This method is based on layer-by-layer deposition using electrostatic attraction between oppositely charged ions. Beside, the diazo coupling reaction proceeded to form azo dye layer on the PET fibers the same time. The corresponding results of the multilayer films have been discussed on the level of color strength (K/S).