• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.689-695
• /
• 2002

Film compositions are needed in semiconductor manufacturing for such diverse application as production tool qualifications and process development. Surface and interface information is generally provided with Auger electron spectroscopy(AES). In this paper, WSix films were analyzed for structural, electrical, and compositional properties of tungsten silicide thin films produced by low pressure chemical vapor deposition as a function of temperature, DCS post flow, shower head life time, and the silicon to tungsten ratios have been investigated. We find that Si/W composition ratio is increased in the surface and interface of WSix thin films by the DCS post flow process and increasing deposition temperature, respectively. The results obtained in this study are also applicable to process control of WSix deposition for memory device fabrication.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1716-1724
• /
• 2018

Single crystal of organic lead halide ($CH_3NH_3PbX_3$; $CH_3NH^+_3$ = methylammonium (MA), $X=Cl^-$, $Br^-$, $I^-$) is the best candidate for material intrinsic property studies due to no grain boundary and high crystal quality than the film having a lot of grain boundary and surface defects. The representative crystallization methods are inverse temperature crystallization (ITC) and anti-solvent vapor assisted crystallization (AVC). Herein, we report bandgap modulated organic lead halide single crystals having a bandgap ranging from ~ 2.1 eV to ~ 3 eV with ITC and AVC methods. The bandgap modulation was achieved by controlling the solvents and chloride-to-bromide ratio. Structural, optical and compositional properties of prepared crystals were characterized. The results show that the crystals synthesized by the two crystallization methods have similar properties, but the halide ratios in the crystals synthesized by the AVC method are controlled more quantitatively than the crystals synthesized by ITC.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.3
• /
• pp.321-330
• /
• 2009

This study was conducted to develop a recipe for a nutritional cookie containing chungkukjang powder that had a composition of ingredients and a texture that resulted in a high preference by all age groups. Wheat flour was partially substituted with chungkukjang powder to reduce its content. Response surface methodology was then used to analyze the measured results, which showed 16 experimental points including 2 replicates for chungkukjang powder, butter and sugar. The compositional and functional properties were then measured, after which these values were applied to a mathematical model. A canonical form and perturbation plot revealed the influence of each ingredient on the final mixture. The results of the sensory evaluation showed significant values with respect to color (p<0.01), texture (p<0.05) and overall quality (p<0.05). Taken together, the results of this study indicated that the optimal ratio was 26.57 g of chungkukjang powder, and 82.08 g of butter for every 52.36 g of sugar. The physical and chemical sensory measurements were then evaluated by a t-test, and the results revealed significant differences in the flavor of the optimized cookie when compared to the control cookie.

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.253-263
• /
• 2015

Ordinary Portland cement is a widely favored construction material because of its good strength and durability and its reasonable price; however, spalling behaviour during fire exposure can be a serious risk that can lead to strength degradation or collapse of a building. Geopolymers, which can be synthesized by mixing aluminosilicate source materials such as metakaolin and fly ash, and alkali activators, are resistant to fire. Because the chemical composition of geopolymers controls the properties of the geopolyers, geopolymers with various Si:Al ratios were synthesized and evaluated as fire resistant construction materials. Rejected fly ash generated from a power plant was quantitatively analyzed and mixed with alkali activators to produce geopolymers having Si:Al ratios of 1.5, 2.0, and 3.5. Compressive strength of the geopolymers was measured at 28 days before and after heating at $900^{\circ}C$. Geopolymers having an Si:Al ratio of 1.5 presented the best fire resistance, with a 44% increase of strength from 29 MPa to 41 MPa after heating. This material also showed the least expansion-shrinkage characteristics. Geopolymer mortar developed no spalling and presented more than a 2 h fire resistance rating at $1,050^{\circ}C$ during the fire testing, with a cold side temperature of $74^{\circ}C$. Geopolymers have high potential as a fire resistant construction material in terms of their increased strength after exposure to fire.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.550-554
• /
• 2009

Unreported dielectrics based on the binary system of MgO-SiO$_2$ were investigated as potential candidates for microwave dielectric applications, particularly those demanding a high fired density and high quality factors. Extensive dielectric compositions having different molar ratios of MgO to SiO$_2$, such as 2:1, 3:1, 4:1, and 5:1, were prepared by conventional solid state reactions between MgO and SiO$_2$. 1 mol% of V$_2$O$_5$ was added to aid sintering for improved densification. The dielectric compositions were found to consist of two distinguishable phases of Mg$_2$SiO$_4$ and MgO beyond the 2:1 compositional ratio, which determined the final physical and dielectric properties of the corresponding composite samples. The increase of the ratio of MgO to SiO$_2$ tended to improve fired density and quality factor (Q) without increasing grain size. As a promising composition, the 5MgO.SiO$_2$ sample sintered at 1400 $^{\circ}C$ exhibited a low dielectric constant of 7.9 and a high Q $\times$ f (frequency) value of $\sim$99,600 at 13.7 GHz.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.621-624
• /
• 2011

In order to deposit a homogeneous and uniform ${\beta}$-SiC films by chemical vapor deposition, we constructed the phase-diagram of ${\beta}$-SiC over graphite and silicon via computational thermodynamic calculation considering pressure(P), temperature(T) and gas composition(C) as variables in $C_3H_8-SiCl_4-H_2$ system. During the calculation, the ratio of Cl/Si and C/Si is maintained to be 4 and 1, respectively, and H/Si ratio is varied from 2.67 to 15,000. The P-T-C diagram showed very steep phase boundary between SiC+C and SiC region perpendicular to H/Si axis and also showed SiC+Si region with very large H/Si value of ~6700. The diagram can be applied not only to the prediction of the deposited phase composition but to compositional variation due to the temperature distribution in the reactor. The P-T-C diagram could provide the better understanding of chemical vapor deposition of silicon carbide.

• Journal of Surface Science and Engineering
• /
• v.38 no.5
• /
• pp.202-206
• /
• 2005

Nitriding treatments were conducted on tool steel (SKD 61) at a temperature of $500^{\circ}C$ for 5 hr using high vacuum direct current (DC) plasma, with ammonia and argon as source gases. The structural and compositional changes produced in the nitrided layers by applying different ratios of Ar to $NH_{3}\;(n_{Ar}/n_{NH3}) were investigated using glancing x-ray diffraction (GXRD), optical microscopy, atomic force microscopy (AFM), micro-Vickers hardness testing, and pin-on-disc type tribometer. Nitriding case depths of around of $50{\mu}m$ were produced, varying slightly with different ratios of $n_{Ar}/n_{NH3}. It was found that the specimen surface hardness was 1150 Hv with $n_{Ar}/n_{NH3}=1, increasing to a maximum value of 1500 Hv with $n_{Ar}/n_{NH3}=5. With a further increase in ratio to $n_{Ar}/n_{NH3}=10, the surface hardness of the specimen reduced slightly to a value of 1370 Hv. These phenomena were caused by changes of the crystallographic structure of the nitride layers, i.e the $\gamma'-Fe_{4}N$ phase only was observed in the sample treated with $n_{Ar}/n_{NH3}$=1, and the intensity of the $\gamma'-Fe_{4}N$ phase were reduced but new phase of $\varepsilon'-Fe_{3}N$, which was known as a high hardness, with increasing $n_{Ar}/n_{NH3}. Also, the relative weight loss of counterface of the pin-on-disc with unnitrided steel was 0.2. And that of nitrided steel at a gas mixture ($n_{Ar}/n_{NH3}) of 1, 5, 7, and 10 was 0.4, 0.7, 0.6, and 0.5 mg, respectively. This means that the wear resistance of the nitrided samples could be increased by a factor of 2 at least than that of unnitrided steel.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.57-65
• /
• 1992

The method for investigating the retention behavior and separation optimization was studied to develop a reversed-phase liquid chromatography of eleven thiocarbamates that are used as herbicides. As an isocratic elution system, the statistical simplex technique was applied to find the optimum separation conditions. The resolution was quantitatively evaluated by using COF and ORM method. For thiocarbamate herbicides in which the elution order varies dramatically with solvent composition, the ORM method gave better result than the COF method. For the solvent composition of mobile phase in the ORM method, the ratio of methanol : acetonitrile : tetrahydrofuran : water was 16 : 29 : 2 : 53. Also in this research, an adjusted COF $(\overline{COF})$ method was proposed to rectify the defect in the current COF method, and the compositional ratio of mobile phase containing methanol : acetonitrile : water was 29.5 : 21.5 : 49.0 result of which is similar to that obtained by the ORM method.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.815-824
• /
• 2006

This study was performed to determine the optimum ratio of each ingredient in the steamed foam cake with barley (Hordeum vulgare L.) sproutling powder. The experiment was designed according to the D-optimal design of mixture design, which showed 14 experimental points including 4 replicates for three independent variables (sugar 112${\sim}$139%, barley sproutling powder 1${\sim}$8%, and oil 5${\sim}$25%). The compositional and functional properties of test were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each ingredient on the mixture final product. The results of F-test, volume, color values (L, a, b), textural properties (hardness, gumminess, chewiness) and sensory characteristics (softness) decided a linear model, while the sensory characteristics (color, smell, taste, overall acceptance) decided a quadratic model. The volume of steamed foam cake was increased by sugar addition, and a negative effect was exerted by barley sproutling powder and oil. L and a of color values increased but the b value decreased with increasing sugar and oil content, whereas barley sproutling powder tended to decrease all color values. The addition of barley sproutling powder also had a positive effect on the textural properties (hardness, gumminess, chewiness). Sensory characteristics (color, smell, softness, taste, overall acceptance) could suffer counter results with the excessive addition of sugar, barley sproutling powder, and oil. The optimum formulations by numerical and graphical methods were similar: sugar, barley sproutling powder, and oil were 130.4%, 4.0%, and 10.7% by numerical method, compared to 130.4%, 4.0%, and 10.7% by graphical method, respectively.

• The Korea Journal of Herbology
• /
• v.35 no.3
• /
• pp.33-45
• /
• 2020

Objective : The present study aimed to evaluate the change of the content of 7 active components in decoctions produced by various proportional pairs of Coptis chinensis Franch and Scutellaria baicalensis Georgi in 'Mixed decoction (MD)' and 'Single decoction mixture (SDM)'. Methods : The samples of MDs were prepared by decocting C. chinensis : S. baicalensis with the ratios of 10 g:10 g, 10 g:20 g, and 20 g:10 g. Those of SDMs were prepared by blending each single decoction from C. chinensis and S. Baicalensis with the ratios of 1:1, 1:2, and 2:1. The samples were evaluated by high-performance liquid chromatography with statistical analyses. Results : The analytical methods, which were optimized and validated, were reliably applied to present research. The content of all components in both MDs and SDMs at C. chinensis : S. baicalensis = 1:1 ratio were reduced compared with single herb decoction. The components from each compositional herb in MDs were proportionally increased with the ratio of original herb increased, but inversely proportional to paired herb. The contents of components in MDs were significantly lower than those in SDMs at all ratios, except for high content of baicalin at C. chinensis : S. baicalensis = 2:1. Conclusion : It was concluded that MDs and SDMs as well as the proportions of herbs could affect the contents of the components from original herbal medicines. These results provide the information for the quality control of herbal medicine combined C. chinensis with S. baicalensis.