• 한국재료학회지
• /
• 제23권9호
• /
• pp.510-516
• /
• 2013

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the $-46{\mu}m$ fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size ($d_{50}$) decreased from $22.17{\mu}m$ to $10.79{\mu}m$. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.280-286
• /
• 2020

일반적으로 사용되고 있는 합성수지인 PVC, PET 소재로 이루어진 카드는 쉽게 산화되거나 분해되지 않아서 사용 후에 폐기물로써 소각 또는 매립 처리되어지고 있으며, 소각 과정에서 환경호르몬과 연소가스등의 공해 문제를 일으킨다. 또한 매립 시에는 분해되지 않고 반영구적으로 쓰레기로 남아있어 환경오염을 일으키는 문제점 있다. 본 연구에서는 현재 사용하고 있는 카드의 문제점을 해결할 수 있는 대체 재료로써 대표적인 생분해성 소재인 폴리락트산(PLA : Polylacticacid)을 사용하여 이러한 문제점을 해결하고자 하였다. 그러나 PLA 소재로만 얇은 시트형태의 카드 기재가 만들어질 경우 재료 본래의 물성이 제한되어 저온 충격강도, 고온 안정성, 휨(Bending) 특성 등이 불충분하여 카드로써의 사용범위도 제한될 수밖에 없는 문제점을 가지고 있다. 이를 해결하기 위하여 PLA와 물성보강을 위한 원료의 적절한 배합 조성비를 검토하고, 결정화 핵제 및 첨가제 등의 조성물 검토와 나노컴파운드 기술을 통한 최적의 생분해성 컴파운드 조성물을 제조, 평가 하였다. 또한, 어닐링 (Annealing) 기술을 적용한 라미네이팅 공정을 통해 생분해성 범용 카드로써의 고기능화를 검증하였다.

• 보존과학회지
• /
• 제35권4호
• /
• pp.331-343
• /
• 2019

The purpose of this study was to investigate the material characteristics of black wares excavated from Yongyeon-ri, Damyang and to clarify the correlation of the factors that develop black coulor compared with black wares excavated from other regions. As a results of absorption rate, colour coordinate, compositional mineral, section analysis and contents showed high correlation between the kilns and the waste dumplings, indicating that they were made using the same materials. Second, comparing the microtextures and contents of the glaze layer with the excavated sherds from other kilns, a characteristic coagulation phenomena of iron oxides were not observed in Yongyeon-ri and Gilmyeong-ri, and it was considered that the material, mixing ratio, and firing environment were different from those of Bonggok-dong. In addition, statistical analysis using the major components revealed that the bodies of Yongyeon-ri were highly correlated with those of Bonggok-dong, which is nearest to the region, and similar to Gilmyeong-ri in the glaze layer. The characteristics of colorant were different depending on Fe₂O₃ content and K₂O content also contributed to the classification of the composition of each excavated kiln. Conclusionally, it can be seen from the scientific analysis that the colour of black wares excluded from different regions is materially different from that of iron oxide, the coloring condition, and the firing environment.

• Asian Journal of Atmospheric Environment
• /
• 제11권3호
• /
• pp.165-175
• /
• 2017

In Japan, the primary carbonaceous particles emitted from motor vehicles and waste incinerators have been reduced due to strict regulations against exhaust gas. However, the relative contribution of carbonaceous particles derived from plants and biomass has been increasing. Accordingly, compositional analysis of carbonaceous particles has become increasingly important to determine the sources and types of particles produced. To reveal the sources of the organic particles contained in particulate matter with diameters of ${\leq}2.5{\mu}m$ ($PM_{2.5}$) and the processes involved in their generation, we analyzed molecular marker compounds (2-methyltetrols, cis-pinonic acid, and levoglucosan) derived from the plants and biomass in the $PM_{2.5}$ collected during daytime- and nighttime-sampling periods in summer (July and August) and autumn (November) in Kazo, which is in the northern area of Saitama prefecture, Japan. We also measured $^{14}C$ carbonaceous concentrations in the same $PM_{2.5}$ samples. The concentrations of 2-methyltetrols were higher in the summer than in the autumn. Because the deciduous period overlaps with this decrease in the levels of 2-methyltetrols, we considered the emission source to broad-leaved trees. In contrast, the emission source of the cis-pinonic acid precursor was considered to be conifers, because its concentration remained almost constant throughout the year. The concentration of levoglucosan was considerably increased in the autumn due to frequent biomass open burning. The ratio of plant-derived carbon to total carbon, obtained by measuring of $^{14}C$, in summer $PM_{2.5}$ sample was higher in the nighttime, and could be influenced by anthropogenic sources during the daytime.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.31-36
• /
• 1991

스퍼터링에 의해 형성된 비정질 Co/sub 87/Zr/sub 4/Nb/sub 9/ 박막을 TEM과 EDS로 분석하여 박막의 구조적 그리고 저성적 불균일성을 관찰하였다. 특히 기판 bias를 가한 상태에서 제조된 박막을 회전 자장 열처리했을 때는 Co-rich 지역과 (Zrnb) oxied-rich 지역의 조대한 조직으로 분리되었으며, 이러한 박 막의 자기적 특성은 'ultra-soft'한 성질을 나타내었다. Ulta-soft함 박막은 H/sub c/=0.18 Oe, H/sub k/ = 0.55 Oe, M/sub r//M/sub s/=0.75의 자기적 특성과 overdamping된 고주파특성, 그리고 외부자계에 대한 자화율 변화곡선이 가역적이고 연속적이라는 특이한 현상을 보인다. 조성적으로 불균일한 박막의 ultra-soft 한 특성은 Co-rich 입자들이 exchange coupling energy와 magnetostatic coupling energy를 최소화 하기 위해 만드는 vortex형의 자화분포로써 설명되었다. 즉 vortex 는 여러개의 co-rich 입자들로 형성 되어있는 것으로 추정되며, 수평, 수직방향으로의 반자장 계수(demagnetizing factor)가 각각 flux closure 와 flux reversal에 의해 무시되기 때문에 vortex로 부터 CoZrNb 박막의 ultra-soft 특성을 설명할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1466-1483
• /
• 2008

This paper discusses the development of an up-to-date computerized CPT (Cone Penetration Test) based soil engineering classification system to provide geotechnical engineers with a handy tool for their daily design activities. Five CPT soil engineering classification systems are incorporated in this effort. They include the probabilistic region estimation and fuzzy classification methods, both developed by Zhang and Tumay, the Schmertmann, the Douglas and Olsen, and the Robertson et al. methods. In the probabilistic region estimation method, a conformal transformation is used to determine the soil classification index, U, from CPT cone tip resistance and friction ratio. A statistical correlation is established between U and the compositional soil type given by the Unified Soil Classification System (USCS). The soil classification index, U, provides a soil profile over depth with the probability of belonging to different soil types, which more realistically and continuously reflects the in-situ soil characterization, which includes the spatial variation of soil types. The CPT fuzzy classification on the other hand emphasizes the certainty of soil behavior. The advantage of combining these two classification methods is realized through implementing them into visual basic software with three other CPT soil classification methods for friendly use by geotechnical engineers. Three sites in Louisiana were selected for this study. For each site, CPT tests and the corresponding soil boring results were correlated. The soil classification results obtained using the probabilistic region estimation and fuzzy classification methods are cross-correlated with conventional soil classification from borings logs and three other established CPT soil classification methods.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.224-233
• /
• 2010

As urban function has become diversified and complicated, multifunctional complex facilities to satisfy new functional desires are necessary. Since local autonomy started, many facilities previously run and managed by central administrative agencies are now under management of localities, and functionally, the necessity for governments complexes town to satisfy diverse taste of populace such as creating local community becomes imminent. Analyzing characteristics by space composition factor of the public health center, newly built as part of such governments complexes town and understanding required area of each part, this project is to be used as basic material for construction plan of public health center that is equipped with local characters while devising construction of the public health center in the governments complexes town. Research method is to analyze four public health center facilities located in governments complexes town sites built after 2007, among twenty five public health centers in Seoul, by spatial functions. Also, based on statistical documents of usage of public health center facilities, research over spatial compositional factors and area composition has been conducted. As a result, connectivity between local government building located inside the governments complexes town and public health center and that of spatial composition factor by part, area ratio by part and floor type of public health center are comprehended. Connectivity type of public health centers are divided into horizontal and vertical connectivity and it is found that spatial composition of public health center is compartmentalized into low level, mid level and high level, to make access by users easier. Level type is decided as radial, rotational and combined by hallway connecting facilities.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.47.1-47.1
• /
• 2011

We report on a direct measurement of two-dimensional chemical and electrical distribution on the surface of photovoltaic Cu(In,Ga)$Se_2$ thin-films using a nano-scale spectroscopic and electrical characterization, respectively. The Raman measurement reveals non-uniformed surface phonon vibration which comes from different compositional distribution and defects in the nature of polycrystalline thin-films. On the other hand, potential analysis by scanning Kelvin probe force microscopy shows a higher surface potential or a small work function on grain boundaries of the thin-films than on the grain surfaces. This demonstrates the grain boundary is positively charged and local built-in potential exist on grain boundary, which improve electron-hole separation on grain boundary. Local electrical transport measurements with scanning probe microscopy on the thin-films indicates that as external bias is increases, local current is started to flow from grain boundary and saturated over 0.3 V external bias. This accounts for carrier behavior in the vicinity of grain boundary with regard to defect states. We suggest that electron-hole separation at the grain boundary as well as chemical and electrical distribution of polycrystalline Cu(In,Ga)$Se_2$ thin-films.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.143-148
• /
• 2016

A microfluidic reactor with computer-controlled programmable isocratic pumps and online detectors is employed as a combinatorial synthesis system to synthesize and analyze materials for fabricating CdSe quantum dots for various applications. Four reaction condition parameters, namely, the reaction temperature, reaction time, Cd/Se compositional ratio, and precursor concentration, are combined in synthesis condition sets, and the size of the synthesized CdSe quantum dots is determined for each condition. The average time corresponding to each reaction condition for obtaining the ultraviolet-visible absorbance and photoluminescence spectra is approximately 10 min. Using the data from the combinatorial synthesis system, the effects of the reaction conditions on the synthesized CdSe quantum dots are determined. Further, the data is used to determine the relationships between the reaction conditions and the CdSe particle size. This method should aid in determining and selecting the optimal conditions for synthesizing nanoparticles for diverse applications.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.470-475
• /
• 2016

In this study, $Zn_xMn_{3-x}O_4$ (x=0.95~1.20) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $Zn_xMn_{3-x}O_4$ specimens with variation of ZnO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with tetragonal spinel phase. And, the second phase was observed by the solubility limit of Zn ions in $x{\geq}1.10$ composition. The average grain size was increased from $2.72{\mu}m$ to $4.18{\mu}m$ with increasing the compositional ratio of Zn ion from x=0.95 to 1.20, respectively. $Zn_{1.10}Mn_{1.90}O_4$ specimen showed the minimum electrical resistance of $57.5k{\Omega}$ at room temperature and activation energy of 0.392 eV.