• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.10
• /
• pp.399-406
• /
• 1985

In this paper transparent PLZT ceramics for the composition of 9/65/35 (La/Zr/Ti ) are fabricated using hotpress and the possibility of application to optical shutter is examined by obtaining the On-Off characteristics of specimens. The ferroelectric E-P hysteresis loop exhibits slim loop suitable for the quadratic electrooptic effect. Measurements of the electrooptic effect show that specimens have the quadratic electrooptic effect but the light intensities as functions of electric field exhibit butterfly type hysteresis curves because of its slightly large saturation remanent polarization and coercive field. On-Off characteristics are obtained by electric fields of-6 kv/cm and +2kv/cm. As a result of experiments, 9/65/35 PLZT ceramics can be applied to optical shutter but construction with other composition which has more slim hysteresis loop is desired for obtaining the Off state by zero electric field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.114-117
• /
• 2001

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$(x=0.10, 0.15, 0.20) ceramics were fabricated by the mixed-oxide method and their structural and dielectric properties were investigated with variation of composition ratio and sintering temperature. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around $1020^{\circ}C$ due to the formation of the polycrystalline perovskite phase. BSCT(50/40/10) specimen sintered at $1500^{\circ}C$ showed the highest average grain size(18.25$[{\mu}m]$). Curie temperature and dielectric constant at room temperature decreased with increasing amount of Ca. BSCT(50/40/10) specimen sintered at $1450^{\circ}C$ showed a good dielectric constant, K, (=4324) and dielectric loss, $tan{\delta}$, (=0.972%) properties at 1[KHz].

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1308-1314
• /
• 1995

Changes in phase and microstructure were investigated in the SiC-AlN ceramics prepared by pressureless sintering using yttrium aluminum garnet (YAG) as a sintering aid at 200$0^{\circ}C$ and 210$0^{\circ}C$. The SiC/AlN ratio made a remarkable difference in densification, phase relations and the morphology of grains. In the AlN-rich composition, major phase was 2H and microstructure was composed of the densified equiaxed grains irrespective of the sintering temperatures. While those sintered at 200$0^{\circ}C$ were porous with major phase being 3C, the rod-like and the equiaxed grains were coexisted when sintered at 210$0^{\circ}C$ in the SiC-rich composition.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.147-156
• /
• 1989

The effects of starting composition, sintering temperature and porosity on the mechanical properties of hydroxyapatite ceramics were investigated. The hydroxyapatite powder were prepared by precipitation method using Ca(NO3)2.4H2O and (NH4)2.HPO4. The obtained powders were Ca-deficient hydroxyapatites and as the Ca/P mole ration in the initial solution was increased, the particle size of the precipitates was decreased, and the decomposition of hydroxyapatite to $\beta$-TCP was controlled. The porosity, as well as Ca/P mole ratio in starting composition and sintering temperature, plays major role in the mechanical properties of dense hydroxyapatite ceramics.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.115-117
• /
• 2001

$Ba(Zn_{1-x}Co_x)TaO_3$[BZCT] ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1450{\sim}1550^{\circ}C$ for 5hr. in air. The structural properties of the BZCT ceramics as a function of composition and sintering temperature were investigated by the XRD and SEM. The crystal structure of BZCT ceramics was investigated by the XRD. The microstructure of the specimens were observed by SEM. All the BZCT ceramics sintered above the $1550^{\circ}C$ were showed as a polycrystalline complex perovskite structure without second phases and any unreacted materials. The density of BZCT (70/30) specimen sintered at $1550^{\circ}C$ was $6.31g/cm^3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.104-104
• /
• 2009

In this study, both structural, dielectric and piezoelectric properties of the NKN-0.96BNT-0.04BT ceramics were investigated. All samples of the NKN-0.96BNT-0.04BT ceramics were fabricated by conventional mixed oxide method with Pt electrodes. We report the improved dielectric and piezoelectric properties in the perovskite structure composed of the NKN, BNT and the BT ceramics. We investigated the effects of NKN, BT on the structural and electrical properties of the NKN-0.93BNT-0.07BT ceramics. The dielectric properties and piezoelectric properties of the NKN-0.93BNT-0.07BT ceramics were superior to those of single composition NKN, NKN-BNT and those values for the NKN-0.93BNT-0.07BT ceramics were 861 and 1.12%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.870-875
• /
• 2002

Ba(Zn$_1$-xCox)TaO$_3$[BZCT] ceramics were Prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1450∼1550$\^{C}$ for 5 hr in air. The crystal structure of BZCT ceramics was investigated by the XRD. The microstructure of the specimens were observed by SEM. The structural properties of BZCT specimens were investigated as a function of composition and sintering temperature. All BZCT ceramics sintered over 1550$\^{C}$ were showed a polycrystalline complek perovskite structure without second phases and any unreacted materials. The density of BZCT (70/30) specimen sintered at 1550$\^{C}$ was 6.31g/㎤. In the case of the BZCT(70/30) ceramics sintered at 1550$\^{C}$ for 5 hours, dielectric constant, qualify factor and temperature coefficient of resonant frequency for microwave dielectrics application were a good value of 29, 16,468 at 10㎓ and -4.4 ppm/$\^{C}$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1027-1033
• /
• 1990

In order to identify the origin of phase coexistence at morphotropic tetragonal and rhombohedral boundary in PZT ceramics, the effect of chemical inhomogeneity on phase coexistence region was investigated. Two kinds of PZT ceramics with different chemical homogeneity were prepared by conventional solid state reaction and co-precipitation method. There was coexistence of tetragonal and rhombohedral phase over a wide composition range in PZT ceramics calcined by solid state reaction, and there was also phase coexistence of which region was reduced considerably in sintered samples. And phase coexistence region was not observed in co-precipitated PZT ceramics(within 1 mole%). Therefore compositional fluctuation is considered to be major origin of the phase coexistence at morphotropic phae boundary in PZT ceramics.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.117-117
• /
• 2002

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.380-385
• /
• 2014

Clay-based membranes with submicron pore size were successfully prepared by a simple pressing process using low-cost starting materials(e.g., kaolin (K), bentonite (B), talc (T), and sodium borate). The green bodies were sintered at $1000^{\circ}C$ for 2 h in air. The effect of clay-mineral composition on the flexural strength of clay-based membranes was investigated. The porosity of the clay-based membranes could be controlled within the range of 34 - 42% by adjusting the starting composition. The flexural strength of the low-cost membranes depended on both the porosity and the ${\alpha}$-quartz content. In turn, the porosity and ${\alpha}$-quartz content were affected by the (B+T) /(K+B+T) ratio. The plot of strength relative to this ratio, showed a maximum when the ratio was 0.4. The typical flexural strength of these clay-based membranes (with ratio 0.4) was 28 MPa at 34% porosity.