• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.89-96
• /
• 2023

In this paper, a ferrosilicon by-product was evaluated to confirm the feasibility of recycling it as supplementary cementitious material of ordinary Portland cement in concrete. Three different levels of replacement ratio (10 %, 20 % and 30 % of total binder) were applied to find which is the most beneficial to be used as a binder. Ferrosilicon concrete was initially assessed at setting time and compressive strength. Durability was evaluated by the resistance to chloride penetration test(RCPT) and alkali-silica reaction(ASR) with a comparison to silica fume concrete due to their similarity in chemical composition. The porosimetry and X-ray diffraction analysis along with energy dispersive X-ray spectroscopy give information on the microstructural characteristics of the ferrosilicon concrete. It was found that 10 % ferrosilicon concrete has higher strength while 20 %, 30 % have lower strength than OPC concrete. However, chemical resistance to chloride attack is higher when replacement is increased. Compared to silica fume, the durability of ferrosilicon might be less efficient however, it is obviously beneficial than OPC. High SiO₂ content in ferrosilicon results in producing more C-S-H gel which could make denser pore structure. Most of the risk of alkali silica reaction to silicate binders through length change tests was less than 0.2 %, and both mortar using ferrosilicon and silica fume showed better resistance to alkali silica reaction as the substitution rate increased.Reuse of industrial waste rather than producing highly refined additives might reduce environmental load during manufacture and save costs.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.3
• /
• pp.119-126
• /
• 2023

Sarcopenia is not well known enough to be classified as a disease in 2021 in Korea, but it is recognized as a social problem in developed countries that have entered an aging society. The diagnosis of sarcopenia follows the international standard guidelines presented by the European Working Group for Sarcopenia in Older People (EWGSOP) and the d Asian Working Group for Sarcopenia (AWGS). Recently, it is recommended to evaluate muscle function by using physical performance evaluation, walking speed measurement, and standing test in addition to absolute muscle mass as a diagnostic method. As a representative method for measuring muscle mass, the body composition analysis method using DEXA has been formally implemented in clinical practice. In addition, various studies for measuring muscle mass using abdominal images of MRI or CT are being actively conducted. In this paper, we develop an AI image segmentation model based on abdominal images of CT with a relatively short imaging time for the diagnosis of sarcopenia and describe the multicenter validation. We developed an artificial intelligence model using U-Net that can automatically segment muscle, subcutaneous fat, and visceral fat by selecting the L3 region from the CT image. Also, to evaluate the performance of the model, internal verification was performed by calculating the intersection over union (IOU) of the partitioned area, and the results of external verification using data from other hospitals are shown. Based on the verification results, we tried to review and supplement the problems and solutions.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.17-29
• /
• 2009

There has been an increase in the investigation of deep sea sediments with a consequent increase in the amount of energy required to undertake these investigations. The geotechnical characteristics of Ulleung Basin sediment are explored by using depressurized specimens following methane production tests carried out on pressured core samples obtained at 2,100 m water depth and 110 m below sea floor. Geotechnical index tests, X-ray diffraction, and scanning electron microscope are conducted to identify the geotechnical index parameters, clay mineralogy, chemical composition, and microstructure of the sediments. Compressibility, and elastic and electromagnetic wave parameters are investigated for two samples by using a multi sensing instrumented oedometer cell. The strength chatracteristics are obtained by the direct shear tests. The dominant clay minerals are mostly kaolinite, illite, chlorite, and calcite. The SEM shows a well-developed flocculated structure of the microfossil. Void ratio, electrical resistivity, real permittivity, conductivity, and shear wave velocity show bi-linear behavior with the effective vertical stress: as the vertical effective stress increases. The friction angle obtained by the direct shear test is about $21^{\circ}$, which is similar to the value observed in the Ulleung Basin sediments. This study shows that the understanding of the behavior acting on the diatomaceous marine sediment is important because it often maintains the useful energy resources such as gas hydrate and so will be the new engineering field in the next generation.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.3
• /
• pp.1-15
• /
• 2023

Objectives We aimed to find out the improvement effect of Baekhogainsam-tang (Baihu Jia Renshen-tang, BIT) on metabolic syndrome and alteration of microbiota and gene expression. Methods We used male C57BI/6 mice and randomly assigned them into three groups. Normal control group was fed 10% kcal% fat diet, high-fat diet (HFD) group was fed 45% kcal% fat diet and 10% fructose water. BIT group was fed same diet as HFD group and treated by BIT for once daily, 6 days per week, total 8 weeks. We measured their body weight and food intake every week and performed oral glucose tolerance test 1 week before the end of the study. Then we collected the blood sample to measure triglyceride, total cholesterol, high-density lipoprotein cholesterol, insulin, and hemoglobin A1c. We harvested tissue of liver, muscle, fat, and large intestine for quantitative polymerase chain reaction (qPCR) and histopathological examination. Fresh fecal samples were collected from each animal to verify alterations of gut microbiota and we used RNA from liver tissue for microarray analysis. Results The body weight and fat weight of BIT group were reduced compared to HFD group. The qPCR markers usually up-regulated in metabolic syndrome were decreased in BIT group. Bacteroides were higher in BIT group than other groups. There were also differences in gene expressions between two groups such as Cyp3a11 and Scd1. Conclusions We could find out BIT can ameliorate metabolic syndrome and suggest its effect is related to gut microbiota composition and gene expression pattern.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.5
• /
• pp.603-608
• /
• 2007

Optimal winterizing condition of com oil was cooling temperature of bleached oil from $105^{\circ}C$ to $40^{\circ}C$. Then, filtering it after keeping $1{\sim}2^{\circ}C$ by lowering the temperature gradually with treating perlite of 0.3%(w/w) amount about bleached oil and stirring. We could measure that triglyceride(TG) that extracted from lipid components from spent perlite(SP) obtained through filtration after winterizing by SACC method is major causing materials of clouding in com oil. The result of separating TG fraction by agentation TLC was that it classified into 4 kinds -U3, SU2, S2U, S3 type and the most were U3 type. From this, it's easy to identify cause of clouding in com oil is TG fraction and most of them form wax materials that can observed. The results were they kept clear appearance at $0^{\circ}C$ generally during 39.6 to 96.5 hours, especially the result of A sample that had the lowest temperature condition while they have some difference by condition of treating temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.169-176
• /
• 2010

Generally, poly-urea is widely used as waterproof coating material due to its superior adhesiveness, elongation capacity, and permeability resistance. In addition, it can be quickly and easily applied on structure surfaces using spray application. Since it hardens in about 30 seconds after application, its construction efficiency is very high and its usage as a special functional material is also excellent. However, currently, poly-urea is mostly used as waterproof coating material and the researches on its usage as a retrofitting material is lacking at best. Therefore, basic studies on the use of poly-urea as a general structural retrofitting material are needed urgently. The objective of this study is to develop most optimum poly-urea composition for structure retrofitting purpose. Moreover, the structural strengthening capacity of the developed poly-urea is evaluated through flexural capacity experiments on RC beams and RC slabs. From the results of the flexural test of poly-urea strengthened RC beam and slab specimens, the poly-urea and concrete specimen showed monolithic behavior where ductility and ultimate strength of the poly-urea strengthened specimen showed slight increase. However, the doubly reinforced specimens with FRP sheet and poly-urea showed lower capacity than that of the specimen reinforced only with FRP sheet.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1397-1411
• /
• 2009

This study was aimed to examine the effects of intermittent walking on health related fitness and metabolic syndrome risk factors in elderly women. Forty five elderly women were randomly assigned to three groups: three 10-min walks per day, one 30-min walk per day or no exercise, respectively. Both walking groups exercised three days a week at moderate intensity for 12 weeks. Two-way repeated measures ANOVA was used to test the hypothesis with a significant level of α = .05. The results indicated that body composition(body weight, body mass index, percent body fat), muscle endurance, flexibility and cardiorespiratory fitness significantly increased after 12 weeks for both walking groups. However, it was found that muscle strength significantly increased only in a continuous walking group. Metabolic syndrome risk factors comprised of waist circumference, systolic blood pressure, triglyceride, high-density lipoprotein, and fasting glucose were significantly improved in both walking groups. In addition, there was a difference in these metabolic syndrome risk factors between pre and post exercise. The results of this study support the hypothesis that intermittent walking has a significant impact on health related physical fitness and metabolic syndrome rick factors in elderly women as continuous walking does.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.92-92
• /
• 2022

In preparation for the ever-changing climate and unification of North Korea and South Korea, it is necessary to increase the grain self-sufficiency rate by selecting crops with good utilization in high-altitude regions. The principle is to sow pastures at the end of August. However, sowing occurs in spring because the sowing period is missed when the weather is bad or when the workforce is insufficient. Sometimes when the grassland is completely devastated, it is frequently sowed in spring. In addition, North Korea consists of a high-altitude regions, and has been devastated in a general mountainous region. As a result, the landscape is not good and it is vulnerable to natural disasters such as landslides. Therefore, to prevent this, pasture must be sowed in the high-altitude regions. The goal of this study was to evaluate and compare yield and feed value of pasture species and varieties by spring sowing in high-latitude regions. The study was conducted in Pyeongchang, Gangwon-do, which is 700m height above sea level. The pasture species and varieties was sown on April 24, 2022. Each treatment was carried out by sowing 30 kg/ha, the experiment field size was 1 m²(1m×1m), and randomized block design with tri-repeat. The total of 14 varieties was used in the study, 6 varieties of Orchardgrass (OG), 6 varieties of Tall fescue (TF) and 2 varieties of Perennial ryegrass (PRG). The grassland composition fertilization using (N:P₂O₅:K₂O at 80:200:70 kg/ha) was conducted and management fertilizer was N:P₂O₅:K₂O at 210:150:180 kg/ha. The first harvest was June 26,2022 and the second harvest was on August 16, 2022. For statistical analysis of the data, an Analysis of Variance (ANOVA) was performed using the R3.6.3 software program, and all data was subjected to analysis using Duncan's multiple range test. Significance was set at the 5% level. The dry matter yield at the first harvest was the highest in PRG, and second harvest was the highest in TF (p < 0.05). Overall, PRG showed a trend of gradually decreasing growth, OG and TF showed a trend of gradually improving growth. This showed that PRG was considerably weaker to summer depression than other pasture species. Comparing the total dry matter yield, TF was the highest (4,565.45 kg/ha), but there was no significance difference with PRG (4,487.24 kg/ha) (p < 0.05). In addition, comparing the total TDN (total digestible nutrient) yield, TF was the highest (3147.33 kg/ha), second in PRG (2975.67 kg/ha) and third in OG (2052.33 kg/ha). Since this result is the data of the second harvests, if the result is derived by the end of next year, it will be provided as basic data for selection of pasture species and varieties suitable for spring seeding in high-altitude regions.

• Korean Journal of Community Nutrition
• /
• v.28 no.6
• /
• pp.466-479
• /
• 2023

Objectives: A mobile health intervention program was provided for employees with overweight and obesity for 12 weeks, and a process evaluation was completed at the end of the program. We investigated participant engagement based on app usage data, and whether engagement was associated with the degree of satisfaction with the program. Methods: The program involved the use of a dietary coaching app and a wearable device for monitoring physical activity and body composition. A total of 235 employees participated in the program. App usage data were collected from a mobile platform, and a questionnaire survey on process evaluation and needs assessment was conducted during the post-test. Results: The engagement level of the participants decreased over time. Participants in their 40s, high school graduates or lower education, and manufacturing workers showed higher engagement than other age groups, college graduates, and office workers, respectively. The overall satisfaction score was 3.6 out of 5. When participants were categorized into three groups according to their engagement level, the upper group was more satisfied than the lower group. A total of 71.5% of participants answered that they wanted to rejoin or recommend the program, and 71.9% answered that the program was helpful in improving their dietary habits. The most helpful components in the program were diet records and a 1:1 chat with the dietary coach from the dietary coaching app. The barriers to improving dietary habits included company dinners, special occasions, lack of time, and eating out. The workplace dietary management programs were recognized as necessary with a need score of 3.9 out of 5. Conclusions: Participants were generally satisfied with the mobile health intervention program, particularly highly engaged participants. Feedback from a dietary coach was an important factor in increasing satisfaction.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.279-285
• /
• 2023

In order to predict the mechanical properties of ductile cast iron heat treated in an intercritical temperature range, samples machined from cast iron with a tensile strength of 450 MPa were heat-treated at various intercritical temperatures and air-cooled, after which a microstructural analysis and Brinell hardness test were conducted. As the heat treatment temperature was increased in the intercritical temperature range, the ferrite fraction in the ductile cast iron decreased and the pearlite fraction increased, whereas the nodularity and nodule count did not change considerably from the corresponding values in the as-cast condition. The Brinell hardness values of the heat-treated ductile cast iron increased gradually as the heat treatment temperature was increased. Based on the measured alloy composition, the fraction of each stable phase and the hardness model from the literature, the hardness of the ductile cast iron heat treated in the intercritical temperature range was calculated, showing values very similar to the measured hardness data. In order to check whether it is possible to predict the hardness of heat-treated ductile cast iron by using the phase fraction obtained from thermodynamic calculations, the volumes of graphite, ferrite, and austenite in the alloy were calculated for each temperature condition. Those volume fractions were then converted into areas of each phase for hardness prediction of the heat-treated ductile cast iron. The hardness values of the cast iron samples based on thermodynamic calculations and on the hardness prediction model were similar within an error range up to 27 compared to the measured hardness data.