• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1261-1267
• /
• 2012

The aim of the present study was to investigate effects of a 12-week aerobic exercise training program and a gym-ball exercise training program on body composition, aspartate aminotransferase (AST), alanine aminotransferase (ALT), adipokines, and cardiovascular risk factors in obese children with nonalcoholic fatty liver disease. The subjects were separated into two groups, an aerobic exercise group (n=10), which practiced moderate aerobic exercise training for 12 weeks, and a gym-ball exercise group (n=13), which practiced resistance exercise training for 12 weeks. The results of the analyses are as follows: Weight, body mass index, and body fat were significantly lower (p<0.01, respectively), whereas the $VO_2$ max was higher in both groups (p<0.01). Fasting glucose, insulin and HOMA-IR levels were significantly decreased in the gym-ball exercise group (p<0.05), whereas adiponectin, AST, and ALT levels were significantly increased (p<0.05, p<0.001, p<0.001, respectively) in both groups after the 12-week exercise training program. In addition, our results showed that HOMA-IR, insulin, and concentrations of C-reactive protein (CRP) were significantly lower in both groups. They demonstrate that a 12-week program of regular aerobic exercise or gym-ball exercise yields beneficial effects such as an amelioration of cardiovascular risk factors, body indices, and liver function in obese children with nonalcoholic fatty liver disease.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.623-630
• /
• 2006

The slag viscosity is an important factor determining the operation temperature of entrained flow type of gasifiers. The temperature of critical viscosity, $T_{cv}$, for 5 crystalline slags was predicted by empirical models and FactSage equilibrium calculations, and the validity of each method was tested. Two empirical models were employed: one using $T_h$ from the ash fusion test, and the other using the concentrations of 5 major components. The first model using $T_h$ over-predicted $T_{cv}$ by $20{\sim}100^{\circ}C$, while the model based on the slag composition under-predicted $T_{cv}$ by $80{\sim}120^{\circ}C$. In the equlibrium calculations, $T_{cv}$ was obtained from the liquidus temperature. When the 4-major component concentrations were used in the calculation, the predicted temperatures were higher than the observed. The liquidus temperature was very sensitive to the concentrations of minor components, and the addition of MgO and $Na_2O$ lowered the liquidus temperature. The results with 4 major and 3 minor components most closely described experimentally observed $T_{cv}$. In the case that a chromia refractory was used, it was shown that $Cr_2O_3$ concentration in the slag also needs to be included for more accurate prediction of $T_{cv}$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.1034-1038
• /
• 2007

To examine the difference of health-related quality of life (QoL) of obese patients between before and after treatment of Korean traditional medicine. This study was assessed in 18 obese-women (age 29.72${\pm}$7.38) treated by acupuncture and herbal medicine using SF-36 quality of life questionnaire between January and July 2006, a 36 item instrument yielding 8 dimensions (Social functioning, Role limitation-Physical, Role limitation-Emotion, Mental health, Vitality, Bodily pain, and General health) and a total score. Their weight was measured by Inbody 3.0 (Biospace co. Korea). QoL and body composition was assessed twice at baseline (B) and 4 weeks after treatment. Auricular acupuncture and electrical needle stimulation to abdomen, thigh, and arm fat was used twice a week and complex herb formula was prescribed according to their constitution and symptoms for 4 weeks. Herb medication was taken 2 times a day. Respective variables were analyzed with Wilcoxon signed ranks test and the level set for statistical significance was p <0.05. The mean of the body weight (P=0.000;B64,68${\pm}$6.86, 4 WKs 60.47${\pm}$5.69), fat percentage (P=0.000;B33.14${\pm}$4.86, 4 WKs 30.16${\pm}$5.34), body mass index (P=0.000;B25.18${\pm}$2.44, 4 WKs 23.46${\pm}$2.09) and fat weight (P=0.000;B21.66${\pm}$5.06, 4 WKs 18.41${\pm}$4.57) of some obese patients decreased significantly between before and after treatment for 4 weeks. Physical functioning (P=0.48;B27.06${\pm}$3.17, 4 WKs 28.00${\pm}$1.71), Mental health (P=0.01 ;B18.83${\pm}$5.25, 4 WKs 22.00${\pm}$3.73), Vitality (P=0.028;B13.89${\pm}$3.03, 4 WKs 15.44${\pm}$2.53), Bodily pain (P=.0014;B8.84${\pm}$1.75, 4 WKs 10.15${\pm}$1.78), and the total scores (P=0.001;B104.99${\pm}$12.60, 4 WKs 114.58${\pm}$11.11) of SF-36 were increased significantly after treatments. These data show some differences in QoL and BMI between before and after treatment on obesity and suggest that the treatment with acupuncture and herbal medicine have a positive impact on several domains of QoL of some obese patients. Further randomized clinical trials (RCTs) including follow-up are needed to examine whether acupuncture and herb medicine have a positive effect on QoL of treatment group compared with control group.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.405-412
• /
• 2019

In this study, the physical and chemical properties of mortar are evaluated by micro-analysis, taking into account the substitution rate(20%, 30%, and 40%) of zeolite with porous properties and active hwangtoh. First, the physical and chemical properties of zeolite and active hwangtoh are reviewed to confirm that the specific surface area of those is similar with ordinary portland cement, and the main chemical composition is SiO₂, Al₂O₃, Fe₂O₃, etc.. So, it is thought that they have the properties of pozolan reactive materials. As the results of the strength test considering the amount of substitution based on that of cement, It is confirmed that strength decreases with the increase of the replacement amount of zeolite and active hwangtoh, and the strength of mortar with replacement rate of 20% is higher than OPC mortar. It is confirmed that the amount of porosity is increased due to chemical properties of zeolite and active hwangtoh, and in particular, the size of the pore is greater than 1㎛ in mortar mixed with active hwangtoh.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.235-244
• /
• 2020

This study conducted a series of studies to offer a novel method of using CBS-dust that produced as by-product in the manufacture of cement. Four different contents of BS and CBS-dust were adopted for test parameters of this study. Mortar with 50% of W/B was fabricated. First, in the case of the fresh mortar, the flow decreased as the CBS-dust replacement rate increased, but the binder composition ratio BS 45% and 65% showed higher fl ow than Pl ain when repl acing CBS-dust 5%. In the case of air content, overall, the tendency was proportional to the CBS-dust replacement rate, and chloride tended to exceed the reference value at all replacement rates except for the CBS-dust 0% replacement. The compressive strength of the hardened mortar shows the resul t that the strength is improved when the CBS-dust is repl aced by 5% to 10%, and the CSH gel and structure formation is confirmed by microstructure analysis through the hydration reaction when the CBS-dust is replaced. Therefore, for a given condition CBS-dust is used as a early-strength admixture in a concrete secondary product that uses a large amount of admixture without reinforcing bars it can be an effective method for enhancing the strength of concrete as an alkali activator.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.419-428
• /
• 2013

The objectives of this research were to determine ecological characteristics and chemical gradients in two different loach populations-Misgurnus anguillicaudatus ($M_a$) and Koreocobitis rotundicaudata ($K_r$). Eight chemical parameters were compared to test the chemical preferences between the two species. The population of Kr occurred more in better water quality, compared to the $M_a$-population. The $M_a$-population co-occurred more with tolerant species (TS) and omnivores, whereas the $K_r$-population co-occurred more with sensitive species (SS) and insectivores. The differences in the tolerance and trophic composition matched well with the result of stream health assessment, based on the multi-metric model of Index of Biological Integrity (IBI). The IBI value in habitat with the $M_a$-population was "19.6" (range: 8~40) indicating a fair condition, and the IBI values of $K_r$-population was 29.4 (range: 12~40) indicating good condition. Similar results were found in physical habitat health analysis (QHEI). Overall, data analysis showed that the $M_a$-population belong to the tolerant species and $K_r$-population belong to sensitive species in the tolerance classification.

• Analytical Science and Technology
• /
• v.28 no.4
• /
• pp.288-298
• /
• 2015

A distribution study of glitter was conducted from a local university building. The potential recipient surfaces chosen were the 1,000 chairs kept in 16 separate classrooms of the building. The surface of chairs contacting with buttocks and back of users were tape lifted with commercial adhesive tapes, and the surface of adhesive tapes were examined with a stereomicroscope to locate the glitters. 12 glitter particles were found from 11 chairs kept in 16 classrooms of a building. This result indicates that the possibility of glitter finding from Korean violent crime scene is high. The 12 glitters found from the chairs were analyzed with a stereomicroscope and an FTIR spectrophotometer to find the matching glitter. The stereomicroscope was used for the observation of the shapes, dimensions, colors and holograms of each glitter, and the FTIR spectrophotometer was used for the analysis of the chemical composition of the coating material of each glitter. The examination results revealed that 8 glitters out of 12 glitters were not sharing the common origin each other. Also, two glitters found from two separate classroom chairs share common microscopic and FTIR spectroscopic characteristics which indicating two glitters share common origin. The record of the students who had used the classrooms was traced and the authors could find that the classrooms where the same glitters were found were shared by a group of students who listen to the same class. This result implies that the path of the involved people should be considered while assessing the value of trace evidence.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.45-55
• /
• 2015

Currently, extreme weather events such as super typhoon, extreme snowfall, and heat wave are frequently occurring all over the world by natural and human caused factors. After industrial growth in the 1970s, earth's temperature has risen sharply. due to greenhouse effect. Global warming can be attributed to gases emitted from using fossil fuel such as average carbon dioxide, perfluorocarbons, nitrous oxide, and methane. Especially, carbon dioxide has the highest composition of about 90%. in the fossile fuel usage emitted gas. Concrete has excellent durability as a building material climate change. However, due to various of physical and chemical environmental effect such as conditions during its curing process, the performance degradation may occur. Carbon dioxide in the atmosphere causes steel corrosion and durability decreases by lowering the alkalinity of concrete. Therefore, in this study, concrete durability performance with respect to carbonation from curing conditions change due to wind speed and sunshine exposure time. Concrete carbonation experiment are performed. using wind speed (0, 2, 4, 6) m/s and sunlight exposure time (2, 4, 6, 8) hrs. Also, performance based evaluation through the satisfaction curve based on the carbonation depth and carbonation rate test results are performed.

• Restorative Dentistry and Endodontics
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2009

This study was carried out in order to determine in vitro biocompatibility of white mineral trioxide aggregate (MTA), and to compare it with that of the commonly used materials, i. e. calcium hydroxide liner (Dycal), glass ionomer cement (GIC), and Portland cement which has a similar composition of MTA. To assess the biocompatibility of each material, cytotoxicity was examined using MG-63 cells. The degree of cytotoxicity was evaluated by scanning electron microscopy (SEM) and a colorimetric method, based on reduction of the tetrazolium salt 2,3 bis {2methoxy 4nitro 5[(sulfenylamino) carbonyl] 2H tetrazolium hydroxide} (XTT) assay. The results of SEM revealed the cells in contact with GIC, MTA. and Portland cement at 1 and 3 days were apparently healthy. In contrast, cells in the presence of Dycal appeared rounded and detached. In XTT assay, the cellular activities of the cells incubated with all the test materials except Dycal were similar, which corresponded with the SEM observation. The present study supports the view that MTA is a very biocompatible root perforation repair material. It also suggests that cellular response of Portland cement and GIC are very similar to that of MTA.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.60-67
• /
• 2016

A scale-up test with a continuous solvent extraction and electro-winning system was carried out to separate and recover copper from a synthetic sulfuric acid solution (Cu 10.5 g/L, Co 2.0 g/L, Ni 15.0 g/L, Fe 0.2 g/L). The solution was introduced into mixer-settlers with four stages of extraction and two stages of stripping for continuous countercurrent solvent extraction to separate copper from nickel and cobalt. The loading was carried out using 40% LIX 84-I(v/v) as extractant with a phase ratio of A : O = 1 : 1. Meanwhile, the stripping was undertaken at a phase ratio of A : O = 1 : 1.5 using depleted electrolyte containing 35.0 g/L Cu and 180 g/L $H_2SO_4$ as stripping solution. The extraction and stripping efficiencies were found to be 96.7% and 91.0%, respectively. The copper composition of the stripped solution (pregnant electrolyte) was 50.0 g/L Cu with impurities of 25 ppm nickel, 5 ppm cobalt and 3 ppm iron. In the electro-winning process, copper metal of 99.833 purity was yielded with current efficiency of 98.9% and current density of $1.50A/dm^2$.