• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.1081-1093
• /
• 2023

This study aimed to compare meat quality traits between Berkshire and crossbreed (Landrace × Yorkshire × Duroc), and to investigate the relationship between meat quality traits and fatty acid composition. 20 Berkshire and 20 crossbreed pigs were used to compare pork loin quality and to determine the relationship between measured variables. 23 variables were measured including proximate composition, pH, drip loss and cooking loss, Warner-Bratzler shear force, and fatty acid composition. Berkshire had higher moisture content, pH, water-holding capacity, saturated fatty acids, and redness than the crossbreed pig (p < 0.05). The fat content and polyunsaturated fatty acid were low (p < 0.05) in Berkshire. Correlation analysis showed a negatively correlation between moisture and fat content, and a positively correlation between saturated fatty acid and fat content. Moreover, saturated fatty acid and polyunsaturated fatty acid were negatively correlated. As a result of factor analysis and partial least square regression, saturated fatty acid and polyunsaturated fatty acid were estimated to be the main factors affecting quality characteristics of pork. Pig breed is associated with differences in meat quality, and fatty acid composition can have an effect on meat quality parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.3-3
• /
• 2010

We investigated the influence of the indium content on the threshold voltage ($V_{th}$) shift of sol-gel-derived indium-gallium-zinc oxide (IGZO) thin film transistors (TFTs). Surplus indium composition ratio into IGZO decreases the value of $V_{th}$ of IGZO TFTs showed huge $V_{th}$ shift in the negative direction. $V_{th}$ shift decreases from 10 to -28.2V as Indium composition ratio is increased. Because the free electron density is increased according to variation of the Indium composition ratio.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.455-462
• /
• 1995

Arbor Acres broiler chickens (N=288) with an average initial weight of 59.4 g were fed diets varying in protein and lysine (80, 100, 120% of NRC; 100, 120% of NRC, 1984) in order to investigate the effects of supplemental chromium picolinate on growth performance, nutrient utilizability, carcass composition, serum traits and in vitro protein synthesis. Six replicates of eight chicks were grouped into one treatment Six chicks were sacrificed from each treatment for carcass analysis, and six additional chicks were chosen and dissected for in vitro culture of liver tissue. Body weight gain, feed intake, feed conversion, mortality, carcass composition and serum glucose, HDL/cholesterol ratio, serum triglyceride and serum nonesterified fatty acid appeared to be affected by either the level of dietary crude protein or lysine when supplemented with 200 ppb chromium picolinate (p < 0.05). Retained and secreted proteins in liver acinar cell cultured in vitro were not affected by dietary lysine level but affected by dietary protein level when added with 200 ppb chromium picolinate.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.45-60
• /
• 2023

Concrete in water environment is easily subjected to the attack of leaching, which causes its mechanical reduction and durability deterioration, and the key to improving the leaching resistance of concrete is to increase the compaction of its microstructure formed by the curing. This paper performs a numerical investigation on the intrinsic relationship between microstructures formed by the hydration of cement and slag and leaching resistance of concrete in water environment. Firstly, a shrinking-core hydration model of blended cement and slag is presented, in which the interaction of hydration process of cement and slag is considered and the microstructure composition is characterized by the hydration products, solution composition and pore structure. Secondly, based on Fick's law and mass conservation law, a leaching model of hardened paste is proposed, in which the multi-species ionic diffusion equation and modified Gérard model are established, and the model is numerically solved by applying the finite difference method. Finally, two models are combined by microstructure composition to form an integrated curing-leaching model, and it is used to investigate the relationship between microstructure composition and leaching resistance of slag-blended cement pastes.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.9-22
• /
• 1992

The aim of this research was to investigate physical and mechanical properties of various composition panels, each fabricated with a ratio of fiber to particle of 2 to 10. Type A consisted of fiber-faces and particle-core in layered-mat system. Type B consisted of fiberboard-faces on particleboard-core. Type C consisted of fibers and particles in mixed-mat system. The results obtained from tests of bending strength, internal bond, screw holding strength and stability were as follows: 1. The bending strength and internal bonding of both the Type A panel and the Type B panel were higher than those of the Type C panel and three-layered particle board. 2. The mechanical properties of the Type C panel showed the lowest values of all composition methods. It seems that the different compression ratios of the particle and fiber interrupted the densification of the fibers when hot pressed. 3. The dimensional stability of layered-mat system panels consising of fiber-faces and particle-core was better the than control particleboard. 4. In composition methods of particle and fiber, layered-composition method was more resonable than mixed-composition. The Type B panel had the highest mechanical properties of all the composition types. 5. The Type A panel was considered the ideal composition method because of its resistance to delamination between the particle-layer and the fiber-layer and because of its lower adhesive content and more effective manufa cturing process.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.3-7
• /
• 1990

The chemical Composition of Chinese red pine (Pinus massoniana) submerged in the Yellow Sea for more than 700 years has been examined. When compared to the recent wood, the marked chemical changes in the waterlogged wood is the higher amount of lignin with lesser amount of holocellulose and abnormally high ash content. In the heavily degraded samples, the degradation of cellulose is more severe than that of hemicellulose. However, hemicellulose is much more attacked than the cellulose at the initial stage of deterioration in the sea water. Chemical analysis suggests that the cellulolytic marine microorganisms, whether they are fungi or bacteria. can be regarded as the primary agents for the destruction of the archaeological woods submerged in the sea water.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.3
• /
• pp.121-128
• /
• 2009

This study is for getting sacrificial service, discussing process of sacrificial rituals and understanding the composition of space in Dong-gok Jaesa. For these things, we're arranged for exact blueprint through actual survey and analyzed the architectural features. Dong-gok Jaesa has features which show centripetal space organization with strong closing sparsely. This is intended for sincerity during ritual which is processed without obstruction. This is a mixed form which is unified both straight dwelling and Jung Dang Hyeop Sil type. And this is for all functions which is necessary for Jaesa architecture in only one building. And this is used with organizing technique for space utility with connection of compartments and various enlargement and partition. Through these things, even though it is not a big Jaesa, it shows that this is Korea traditional composition of space technique according to several purposes.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.3
• /
• pp.26-32
• /
• 1998

The chemical composition of differentiating xylem of Populus deltoides M. were investigated and compared with those from sapwood. The cell wall polysaccharides were extracted sequentially from a differentiating xylem and sugar composition was analyzed with G.L.C, H.P.L.C and gel chromatograpy. The pectin substance and hemicellulose are rich in the cell wall of differentiating xylem. The $H_2O$ extract polysaccharides from differentiating xylem were composed with xylose-glucose residues which seem to be xyloglucan and a pectin. The arabinogalactan and the mannan were extracted with $Na_2CO_3$ solution and also the xylan was extracted with KOH solution. Sugar composition of each fractions in gel filteration of purified $H_2O$ polysaccharide suggests that the xyloglucan can be extracted with $H_2O$ from differentiating xylem.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2018

Cu-Fe alloys (CFAs) are much anticipated for use in electrical contacts, magnetic recorders, and sensors. The low cost of Fe has inspired the investigation of these alloys as possible replacements for high-cost Cu-Nb and Cu-Ag alloys. Here, alloys of Cu and Fe having compositions of $Cu_{100-x}Fe_x$ (x = 10, 30, and 50 wt.%) are prepared by gas atomization and characterized microstructurally and structurally based on composition and powder size with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Grain sizes and Fe-rich particle sizes are measured and relationships among composition, powder size, and grain size are established. Same-sized powders of different compositions yield different microstructures, as do differently sized powders of equal composition. No atomic-level alloying is observed in the CFAs under the experimental conditions.