• 제목/요약/키워드: Composite construction

검색결과 1,849건 처리시간 0.029초

MMA 모르터 복합체의 강도특성 및 부재설계 (I) (Member design and strength characteristics of the MMA mortar composites (I))

  • 지효선
    • 복합신소재구조학회 논문집
    • /
    • 제6권3호
    • /
    • pp.41-49
    • /
    • 2015
  • The repair of manhole raise has been caused much construction times and disruption of traffic flow, serious environmental pollution from crushed construction wastes, and budget waste due to the repeated repair construction works. In order to overcome such problems, we have developed the new manhole repairing composite structures by using a glass fiber-reinforced polymer (GFRP) pipe, which can raise manhole to the regular height of the overlayed road pavement with rapid construction and minimum traffic jams. This environmental-friendly technology is method completed by the methyl methacrylate monomer (MMA) double wide flanged GFRP pipe composite structures in order to raise manhole to the regular height. In this paper, two kinds of the compressive strength tests of MMA mortar composites were conducted and evaluated by a general compressive strength test, and compressive strength test after freezing-thawing resistance test. It was found that this MMA mortar composites will be used for the application of the double wide flanged GFRP pipe composite structures.

연속형 프리플렉스 합성거더 교량의 캠버 관리 (Camber Management of Continuous Preflex Girder Bridges)

  • 김종인;최영화
    • 한국산업융합학회 논문집
    • /
    • 제7권4호
    • /
    • pp.433-441
    • /
    • 2004
  • This paper presents a strategy for the quality assurance of the continuous preflex composite girder bridge through the camber management of the girder during construction. The construction stages which require welding, balanced preflexion loads at the ends, etc. may cause unexpected large deformation to the preflex girder. Furthermore, these defects can be detected by measurements and analyses of the girder behavior which is sometimes time consuming. In the present study, preflex girder's camber data at equally spaced nodes in each construction stage are obtained and analyzed for the quality control of thee span continuous preflex girder composite bridge.

  • PDF

Structural behavior of precast concrete deck with ribbed loop joints in a composite bridge

  • Shin, Dong-Ho;Chung, Chul-Hun;Oh, Hyun-Chul;Park, Se-Jin;Kim, In-Gyu;Kim, Young-Jin;Byun, Tae-Kwan;Kang, Myoung-Gu
    • Smart Structures and Systems
    • /
    • 제17권4호
    • /
    • pp.559-576
    • /
    • 2016
  • This study is intended to propose a precast bridge deck system, which has ribbed loop joints between the decks and lacks internal tendons to improve the workability of existing precast deck system. A composite bridge deck specimen was fabricated using the proposed precast deck system, and static and fatigue load tests were conducted to evaluate the structural behavior and the crack pattern of the deck. Leakage test of the deck joints was also conducted and finite element analysis was carried out to compare with the test results.

2세대 남세균 혼입 생체 건축 자재 생산을 위한 잔골재-젤라틴 복합체의 실험적 연구 (Experimental Research on 2nd generation of Cyanobacteria Living Building Material)

  • 박지윤;손다솜;이종구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.197-198
    • /
    • 2023
  • Construction waste takes about 50% of total industrial waste. Researchers focuses to decrease the amount of construction waste by recycling the waste during the construction site. However, research about recycling the gelatin-sand composite is not yet been studied. This research is an experimental research on recycling the total specimen of gelatin-sand composite. Two methods were held when making the 2nd generation of the gelatin-sand specimen. As a result, there was no difference in flexural strenght between two different method of 2nd generation of specimen. However, the second method of 2nd generation showed about 20% higher compressive strength than the first method.

  • PDF

지하 합벽 거푸집의 시공단계별 원가 분석에 관한 연구 (Cost Analysis of Construction Phase in Basement Composite Wall Form)

  • 최오영;허경무;김태희;김재엽;김광희
    • 한국건축시공학회지
    • /
    • 제9권6호
    • /
    • pp.189-195
    • /
    • 2009
  • 최근 인구의 도심 집중화 현상이 심화됨에 따라 토지이용의 극대화를 위해 지하공간의 활용이 매우 활발하게 진행되고 있다. 또한 최근 건축물의 지하심도가 깊고 인접건물과 근접시공 되는 경우가 많으므로 건축물의 지하외벽은 슬러리 월 또는 흙막이가시설을 외벽 거푸집으로 사용하고 내측에만 거푸집을 시공하는 방식인 합벽으로 시공되고 있다. 그러나 지하층 합벽 거푸집공사에 대한 원가분석이 건축공사 표준품셈 등에 없는 실정이다. 따라서 본 연구는 지하층 합벽 거푸집 공사의 원가분석을 시행하여 시공단계별 투입원가에 대한 자료를 제공하고자 하였다. 연구결과는 수평목 설치 및 해체는 3%, 거푸집 설치 및 해체는 26%, 보강재 설치 및 해체는 12%, 지지대 설치 및 해체는 42%, 기타 작업은 17% 이다. 정확한 투입원가를 프로세스별 구분하여 정리함으로서 신기술 및 신공법 개발 시 중점을 두어야 하는 포인트를 제시할 것으로 판단된다.

T형 합성보의 내력평가에 관한 연구 (A Study on the strength evaluation for T-type Composite Beam)

  • 김상모;김규석
    • 한국강구조학회 논문집
    • /
    • 제15권4호통권65호
    • /
    • pp.467-474
    • /
    • 2003
  • 일반적인 합성보는 콘크리트 슬래브와 H형강 철골보 사이에 작용하는 수평전단력을 쉬어코넥터로 긴결하여 휨내력 및 강성을 증가시킨 구조다. H형강대신 U형 철골을 사용하고 그 속에 콘크리트를 채운 새로운 형태의 합성보 시스템이라 할 수 있는 T형 합성보의 구조 특성을 실험에 의해 분석하고, 기존의 합성보 설계이론을 토대로 내력평가를 하는 데 그 목적이 있다. 또한 T형 합성보의 구조설계 및 시공에 필요한 기초자료를 제시하고자 한다.

중력하중을 받는 SRC기둥-합성보 접합부 실험 (Test of SRC Column-to-Composite Beam Connection under Gravity Loading)

  • 김영주;배재훈;안태상;장성훈
    • 한국강구조학회 논문집
    • /
    • 제26권5호
    • /
    • pp.441-452
    • /
    • 2014
  • 본 논문에서는 중력하중을 받는 SRC기둥과 합성보 접합부의 정적실험을 수행하였다. 합성보는 H형단면과 U형단면으로 구성되어 있다. 모두 5개의 실대형 실험체를 설계하여 실험변수, 즉, H형단면 크기, 스터드커넥터의 유무, 스티프너와 상부근의 유무 등이 접합부의 거동에 미치는 영향을 조사하였다. 또한 H형단면과 U형단면의 용접접합부의 구조성능을 초기강성, 내력 및 변형능력을 중심으로 기술하였다.

Experimental and analytical performance evaluation of steel beam to concrete-encased composite column with unsymmetrical steel section joints

  • Xiao, Yunfeng;Zeng, Lei;Cui, Zhenkun;Jin, Siqian;Chen, Yiguang
    • Steel and Composite Structures
    • /
    • 제23권1호
    • /
    • pp.17-29
    • /
    • 2017
  • The seismic performance of steel beam to concrete-encased composite column with unsymmetrical steel section joints is investigated and reported within this paper. Experimental and analytical evaluation were conducted on a total of 8 specimens with T-shaped and L-shaped steel section under lateral cyclic loading and axial compression. The test parameters included concrete strength, stirrup ratio and axial compression ratio. The response of the specimens was presented in terms of their hysterisis loop behavior, stress distribution, joint shear strength, and performance degradation. The experiment indicated good structural behavior and good seismic performance. In addition, a three-dimensional nonlinear finite-element analysis simulating was conducted to simulate their seismic behaviors. The finite-element analysis incorporated both bond-slip relationship and crack interface interaction between steel and concrete. The results were also compared with the test data, and the analytical prediction of joint shear strength was satisfactory for both joints with T-shaped and L-shaped steel section columns. The steel beam to concrete-encased composite column with unsymmetrical steel section joints can develop stable hysteretic response and large energy absorption capacity by providing enough stirrups and decreased spacing of transverse ties in column.

리츠와 건설경기, 부동산경기, 주식시장과의 관계 분석 (Relation Analysis Between REITs and Construction Business, Real Estate Business, and Stock Market)

  • 이치주;이강
    • 한국건설관리학회논문집
    • /
    • 제11권5호
    • /
    • pp.41-52
    • /
    • 2010
  • 리츠는 주식시장에 상장되어 있으면서 부동산 개발을 위한 자금조달의 성격과 부동산에 투자하는 특징도 있으므로, 주식 시장과 건설 및 부동산시장과 관계가 있을 것으로 예상할 수 있다. 본 연구에서는 리츠와 주식시장, 건설 및 부동산 경기와 관계된 지표들을 시계열 분석하여, 리츠와의 영향관계를 분석하였다. 시계열 분석은 백터자기회귀모형과 백터오차수정모형을 사용하였으며, 다음의 세 부분으로 분류하여 분석하였다. 첫째, 리츠와 건설 코스피 지수와의 관계를 분석한 결과, 건설 코스피 지수가 리츠에 영향을 주는 것으로 분석되었다. 둘째, 리츠와 건설경기 동행지수인 건축착공면적, 부동산 경기 지수인 오피스 임대지수와 주택매매가격지수와의 관계를 분석하였다. 각 지표들은 서로 인과관계는 없는 것으로 분석되었지만, 리츠와 주택매매가격지수는 서로에게 영향을 주는 것으로 분석되었다. 셋째, 리츠와 건설경기 선행지수인 건축허가면적의 관계를 분석하였다. 두 지표는 서로 인과관계가 없는 것으로 분석되었지만, 건축허가면적이 리츠에 영향을 미치는 것으로 분석되었다. 본 연구를 통해 리츠는 주식시장과 주택경기, 건설경기 선행지표인 건축허가 면적에 영향을 받지만, 건설경기 동행지표인 건축착공면적과 오피스 임대지수에는 상대적으로 영향을 작게 받는 것으로 분석되었다.