• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.636-644
• /
• 2004

Recently, self-etching adhesive system have been developed and bonding procedures simplified into one or two steps, which are simultaneously applied to both enamel and dentin. These systems are easy to use and have the potential for good clinical success. The purpose of this study is to evaluate in vitro the microleakage on the cementum/dentin and enamel walls in composite resin restoration of Class V cavities, regarding the use of different adhesive systems. 30 human premolars were divided into 3 groups. A standardized Class V preparation was prepared on the buccal and lingual surface of each premolar. The preparation were made parallel to the cementoenamel junctions, with the gingival half of the preparation extending 1mm apical to the cementoenamel junction. After adhesive system was applied to teeth as manufacture's recommendation, hybrid resin composite was filled in bulk into the preparation and light polymerized according to manufacturer's recommendations. Specimen were stored in distilled water at $37^{\circ}C$ for 5 days and thermocycled 1000 times ($5^{\circ}C{\pm}2^{\circ}C\;and\;55^{\circ}C{\pm}2^{\circ}C)$, then immersed in a 2% methylene blue solution for 12 hours. After sectioning mesio distally through the restorations, the degree of dye penetration was scored under a stereomicroscope at ${\times}\;25$ magnification. The data were analyzed statistically using t-test and one-way ANOVA. The results were as follows: ${\cdot}$ There is no adhesive system which can prevent microleakage perfectly. ${\cdot}$ There is significant difference in microleakage between enamel margin and dentin margin (p<0.0001). ${\cdot}$ In enamel margin, self-etching primer systems did not show any significant difference comparing total-etching system. In denin margin, self-etching primer systems did not show any significant difference comparing one-bottle adhesive system used in combination with total-etching.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.450-460
• /
• 2005

The aim of this study was to evaluate the effect of cavity shape, bond quality of bonding agent and volume of resin composite on shrinkage stress developed at the cavity floor. This was done by measuring the shear bond strength with respect to iris materials (cavity shape , adhesive-coated dentin as a high C-factor and Teflon-coated metal as a low C-factor), bonding agents (bond quality: $Scotchbond^{TM}$ Multi-purpose and Xeno III) and iris hole diameters (volume; 1mm or 3mm in $diameter{\times}1.5mm$ in thickness). Ninety-six molars were randomly divided into 8 groups ($2{\times}2{\times}2$ experimental setup). In order to simulate a Class I cavity, shear bond strength was measured on the flat occlusal dentin surface with irises. The iris hole was filled with Z250 restorative resin composite in a bulk-filling manner. The data was analyzed using three-way ANOVA and the Tukey test. Fracture mode analysis was also done When the cavity had high C-factor, good bond quality and large volume, the bond strength decreased significantly The volume of resin composite restricted within the well-bonded cavity walls is also be suggested to be included in the concept of C-factor, as well as the cavity shape and bond quality. Since the bond quality and volume can exaggerate the effect of cavity shape on the shrinkage stress developed at the resin-dentin bond, resin composites must be filled in a method, which minimizes the volume that can increase the C-factor.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.440-447
• /
• 2009

This study was performed to compare the wear resistance of sealant and flowable resins for analyzing the effect of flowable resin as a sealant in preventive resin restorations. Specimens were made and Vicker's hardness number and surface roughness were measured. SEM observations of the polished and abraded surfaces were established. Kruskal-Wallis rank test and Mann-Whitney U test at the significant level of ${\alpha}$=0.05 were used. The following results were obtained: 1. The microhardness was decreased among groups in following order: Z350 (3M ESPE, U.S.A), Estelite (Tokuyama Dental, Japan) and Ultraseal (Ultradent, U.S.A). There were significant differences in all groups (p<0.0001). 2. The surface roughness was decreased among groups in following order: Ultraseal XT plus, Palfique Estelite LV and Filtek Z350 flowable. However, there is no statistically significant differences in roughness among Estellite, Z350 and Ultraseal at the significance level of ${\alpha}$=0.05, with p=0.116 3. SEM observation of the unworn and worn surfaces revealed the qualitative differences in the wear appearance among groups. The results in this study indicate that flowable resin is better than sealant in aspect of physical properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.261-268
• /
• 2016

This study was conducted to establish roasting conditions for optimization of Citri Unshii Pericarpium antioxidant activity using response surface methodology (RSM). A central composite design was applied to investigate the effects of two independent variables, namely roasting temperature ($40{\sim}100^{\circ}C$; $X_1$) and roasting time ($5{\sim}15min$; $X_2$), on responses such as electron donating ability ($Y_1$), total phenolic content ($Y_2$), total flavonoid content ($Y_3$), and hydroxyl radical scavenging activity ($Y_4$). The maximum electron donating ability was 72.38% at a roasting temperature of $71.12^{\circ}C$ and roasting time of 9.39 min. The maximum total phenolic content was 10.76 mg tannic acid equivalents/g at a roasting temperature of $69.71^{\circ}C$ and roasting time of 8.39 min. The maximum total flavonoid content was 105.99 mg quercetin equivalents/100 g at $72.54^{\circ}C$ and 8.64 min. The maximum hydroxyl radical scavenging activity was 60.33% at $68.97^{\circ}C$ and 9.84 min. Based on the superimposition of three dimensional RSM with respect to electron donating ability, total phenolic content, total flavonoid content, and hydroxyl radical scavenging activity under various conditions, optimum conditions were established as follows: roasting temperature of $70.90^{\circ}C$ and roasting time of 9.03 min.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.85-95
• /
• 2016

In this study, furfural, which is one of the value-added chemicals, was produced from the hydrolyzate of Quercus mongolica using dilute acid pretreatment, and the optimal pretreatment condition was determined by Response Surface Methodology (RSM) to obtain high yield of furfural. Based on Central Composite Design, the pretreatment experiment was designed with parameters such as reaction temperature ($X_1$), acid concentration ($X_2$), and reaction time ($X_3$) as independent variables, while dependent variable was furfural concentration (Y), and furfural yield (Z) was shown as percentage of Y per a dry weight basis. According to results of RSM, it was confirmed that reaction temperature ($X_1$) was the most influence factor and reaction temperature ($X_1$)-acid concentration ($X_2$) was the most significant interaction factor on furfural yield. Also, the optimal condition for the highest furfural yield was predicted at reaction temperature of $184^{\circ}C$, acid concentration of 1.17%, and reaction time of 5 min by RSM, and expected maximum yield of furfural was 6.37%. Experimentally, the maximum yield of furfural produced at above optimal condition was 6.21%, and it was considerably similar with the predicted value, and therefore the model for furfural production from the hydrolyzate of Quercus mongolica during dilute acid pretreatment could be built using RSM.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.570-576
• /
• 2014

Response surface methodology (RSM) was applied to optimize the microwave-assisted extraction (MAE) conditions for electron-donating ability, total phenol content, and total flavonoid content of Ligustrum lucidum Aiton. Ligustrum lucidum Aiton from different regions was tested, and Ligustrum lucidum Aiton from Haenam was chosen due to its higher total phenolic content, total flavonoid content, DPPH radical scavenging activity and ABTS radical scavenging activity compared to the other samples. Central composite design was used to optimize extraction of Ligustrum lucidum Aiton from Haenam as well as determine the effects of extraction temperature ($X_1$) and extraction time ($X_2$) on dependent variables ($Y_n$). Determination coefficients ($R^2$) of the regression equations for dependent variables ranged from 0.8858 to 0.9517. The optimum points were $131.68^{\circ}C$ for extraction temperature and 5.49 min for extraction time. Predicted values of the optimized conditions were acceptable when compared to experimental values.

• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.83-89
• /
• 2011

Various functional and useful components in Portulaca oleracea were extracted with ethanol and the optimum solvent conditions were set by monitoring of response surface methodology(RSM). A central composite design for optimization was applied to investigate the effects of the three independent variables of extraction temperature, ethanol concentration, and extraction time, on dependent variables including total phenolics, electron-donating ability, brown clolor and total flavonoids of Portulaca oleracea. The content of total phenol was essentially unaffected by extraction time or extraction temperature, but it was highly influenced by ethanol concentration. The maximum total phenol content was 31.70mg/mL obtained at 45.84% of ethanol concentration, $79.66^{\circ}C$, and after 2.67hr of extraction. Electron-donating ability (EDA) was affected by ethanol concentration and the maximum EDA was 74.67mg/mL at 52.95% ethanol concentration, $52.33^{\circ}C$ and 4.84hr of extration time. The browning color was rarely affected by extraction time but, it was highly influenced by ethanol concentration and extraction temperature. The maximum extent of browning color was obtained at 97.75% of ethanol concentraion, $65.88^{\circ}C$ and 2.93hr of extraction time. The content of total flavonoid was significantly influenced by extraction time, and the maximum total flavonoid level was 58.28mg/mL obtained at 96.62% ethanol concentration, $61.87^{\circ}C$ after 3.70hr of extraction. As a result, The optimal conditions for effective extraction were predicted as follows, 70.3% of ethanol concentration, $62.1^{\circ}C$ of extraction temperature and 3.3hr of extraction time.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.352-357
• /
• 2005

The optimization of extraction conditions of phytoestrogen from pomegranate by hot water was conducted by analyzing the extraction characteristics. The purpose of this study was effective utilization of bioactive components of pomegranate, and the analyzing was performed with response surface methodology (RSM). This study established 10 sections based on the central composite design with the independent variables of extraction temperature (60, 70, 80, 90, $100^{\circ}C$) and extraction time (1, 2, 3, 4, 5 hr) to predict the optimal conditions for extraction of the effective components. The dependent variables were measured for extracted materials, those were, the major components such as chlorogenic acid, kaempferol, $17-{\alpha}-estradiol\;and\;17-{\beta}-estradiol$ content, and regression analysis was performed by SAS program, and optimal conditions for each characteristics were predicted, and the characteristics of extraction were analyzed by response surface methodology. It was found that chlorogenic acid, kaempferol, and $17-{\alpha}-estradiol$ content were greatly affected by extraction temperature. However, $17-{\beta}-estradiol$ content was affected significantly by extraction time. Regression formulas for each variable were elicited from this study, and the chlorogenic acid, kaempferol, $17-{\alpha}-estradiol\;and\;17-{\beta}-estradiol$ content depending on response surface methodology factor were superimposed. It was shown that optimal temperature and extraction time were $98{\sim}100^{\circ}C\;and\;3{\sim}5$ hrs, respectively.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.376-384
• /
• 2009

Response surface methodology (RSM) was used to monitor the characteristics of ethanol extracts from glasswort (Salicornia herbacea). A central composite design was used to investigate the effects of the independent variables of sample ratio, extraction temperature, and ethanol concentration on the dependent variables color, sugar, salinity, yield, electron donating ability, and total polyphenol content of extracts. The maximum $^{\circ}Brix$ (8.46) was obtained under specific extraction conditions, with a sample ratio of 7.04 g/100 mL, an extraction temperature of $89.01^{\circ}C$, and an ethanol concentration of 34.29% v/v. At a sample ratio, extraction temperature, and ethanol concentration of 7.00 g/100 mL, $89.15^{\circ}C$, and 34.14% v/v, respectively, the salinity was 7.35%. When the sample ratio, extraction temperature, and ethanol concentration were 5.56 g/100 mL, $68.61^{\circ}C$, and 99.14% v/v, respectively, the maximum electron donating ability was 86.10%. A maximized total polyphenol content of 1,140.15 mg/100 g was found with the following conditions: sample ratio of 8.6 g/100 mL, extraction temperature of $64.19^{\circ}C$, and ethanol concentration of 71.74% v/v. Overall, the optimal ranges of extraction conditions for effective components of glasswort were 3.38.5.33 g/100 mL sample ratio, $55.87-76.96^{\circ}C$, and 25.00.67.31% v/v ethanol.