• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.10-21
• /
• 2015

For the safe design of steel-concrete composite structure, usable yield strength of steels are limited in most of design standard. However, this limitation sometimes cause the uneconomical design for some kind of members such as slender columns which was affected by elastic buckling load. For the economical design for slender columns, parametric study of RCFT (Rectangular CFT) with high-strength steel is conducted, especially investigating the limitation of yield strength of high-strength steels. Using ABAQUS, finite element analysis program, the finite element model was constructed and calibrated with experimental study for RCFT with high strength steel which have yield strength up to 680MPa. Investigated design parameters are yield strength of steel, compressive strength of concrete, steel thickness and slenderness ratio. The effect of design parameters were compared with design standard, KBC-09. From the parametric study with 54 models and previous test specimens, RCFT can be safely design with higher yield strength of steels than currently limited by KBC for large range of slenderness ratio.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.561-568
• /
• 2002

Purpose of this research is estimating polymerization depth of different source of light. XL 3000 for halo-gen light, Apollo 95E for plasma arc light and Easy cure for LED light source were used in this study. Different shade (B1 & A3) resin composites (Esthet-X, Dentsply, U.S.A.) were used to measure depth of cure. 1, 2, and 3 mm thick samples were light cured for three seconds, six seconds or 10 seconds with Apollo 95E and they were light cured with XL-3000 and Easy cure for 10 seconds, 20 seconds, or 40 seconds. Vicker's hardness test carried out after store samples for 24 hours in distilled water. Results were as following. 1. Curing time increases from al1 source of lights, oui$.$ing depth increased(p<0.05). 2. Depth (that except 1mm group and 2mm group which lighten to halogen source of light) deepens in all groups, Vickers hardness decreased(p<0.05). 3. Vicker's hardness of A3 shade composite was lower in all depths more than B1 shade composites in group that do polymerization for 10 seconds and 20 seconds using halogen source of light(p<0.05), but group that do polymerization lot 40 seconds did not show difference(p>0.05). 4. Groups that do polymerization using Plasma arc and LED source of light did not show Vicker's hardness difference according to color at surface and 1mm depth(p>0.05), but showed difference according to color at 2mm and 3mm depth(p<0.05). The results showed that Apollo 95E need more polymerization times than manufacturer's recommendation (3 seconds), and Easy cure need polymerization time of XL-3000 at least.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.621-636
• /
• 1999

When mucoperiosteal flaps are positioned and sutured to desirable position, the wound contains several interface between tissues which differ fundamentally in composition & biological reaction. Thus the C-T surface of the flap will, on one hand, oppose another vascularized surface, and on the other, the avascular dental material for example, when root resoptions, fractured root, endodontic perforation, deep root carious lesions were filled with amalgam, glass ionomer, resin etc. Recently, a number of case report described the successful treatment of a subgingival root lesion with restorative material & free gingival graft, open flap surgery, but more objective research was needed . Most of study on restorative materials were concerned for cytotoxicity not for actual healing event on that materials and its influencing factors such as biocompatibility, surface wettability, surface topography . The aim of this in vitro study was to evaluate the effect of amalgam, resin modified glass ionomer, composite resin per se, and their surface roughness on the growth of human gingival fibroblast. The cells were obtained and placed on culture flask and incubated for 3 days with the prepared test materials. Then count the attached cell number with hemocytometer,(n=12) and 2 samples were examined with SEM about attachment cell morphology . Another 4 samples were evaluated on their surface roughness with Talysurf and average surface roughness value(Ra) were obtained. Statistical difference in attached cell number, roughness value were analyzed using ANOVA. The number of attached cell was as follows, for root dentin specimen 16.7${\pm}$4.41, resin modified glass ionomer 14.0${\pm}$4.15, resin 8.13${\pm}$3.63, amalgam 0.72${\pm}$3.33(${\times}10^3$). Between root dentin and resin-modified glass ionomer, no significant difference was observed, but resin, amalgam showed a significant less cell numbers than for root dentin, resin modified glass ionomer cement. SEM examination expressed many cell surface attachment apparatus in root dentin and resin modified glass ionomer specimens. For resin specimen, cell attachment was observed but exposed less appratus. The average surface roughness value are following results. Dentin specimen 0.6972${\pm}$ 0.104, resin modified glass ionomer 0.0822${\pm}$0.009, resin 0.0875${\pm}$0.005, amalgam 4.2145${\pm}$0.985(${\mu}m$). Between root dentin, resin-modified glass ionomer, and resin, no significant difference was observed, but amalgam showed a significant more rough surface than other groups. When evlauated the interrelationship between cell attachment and surface roughness, therefore, there was weak reverse correlation.(pearson correlation : - 0.593) These results suggest that resin modified glass ionomer have the favorable healing potential when used for subgingival restoration. And for relationship between cell attachment and surface characteristics, further investigations were needed.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.309-314
• /
• 2002

Safflower Yangengs were prepared with composite dried powder of small red bean(Phaseolus radiatus L.) containing various ratios of safflower(Carthamus tinctorius L.) seed powder sifted through 20, 35, 45 and 60 mesh size and kinds of mixed water, their cooking characteristics were evaluated. Water content and water activity of cooked products were increased as the content and sieve mesh number of safflower seed powder increasing from 5%, 20 mesh to 20%, 60mesh, respectively. Color values of yangeng were increased in green tea extract mixed water. Rheological properties of yangengs were measured by compression test with texture analyzer, as results, hardness and fracturability increased that were shown in high content and high mesh number sifted safflower seed powder, but adhesiveness and springiness decreased, respectively. From the sensory evaluation test for yangeng, sensory scores were good scores in more mesh number sifted powder addition, especially overall acceptance, texture and fracturability. The 45mesh and 15% powder added yangeng was noted as having high sensory scores and preferable acceptability in sensory evaluation.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.1
• /
• pp.65-78
• /
• 2006

Background : Quality of life(Qol) is a broad concept that incorporates all aspects of an individual's existence. There is many study about Qol of the patient with dermatic disease in the west, but in korea there is few study, particularly for oriental medical academic world. Objective : The purpose of this study is to Investigate the influence of dermatic disease, particularly acne on the Qol by using the korean version of skindex-29. Method : We measured the Qol of Kyungwon university student participating in Dongseo health examination by using the Korean version of Skindex-29. A total of 535 students were enrolled In this study. Results are reported as 3 scales scores (functions, emotions, and symptoms) and a composite score (average scale score). Result : 1) There were no statistically significant gender-related differences in Qol scores in patient group with acne. 2) There were no significant correlation between Age Duration and Qol socres in patient group with acne. 3) Acne group marked higher Qol scores than contact dermatitis and normal group (lower than Acne with atopic dermatitis group) within emotional scales. 4) Acne group marked higher Qol scores than scar, tinea cruris, and normal group (lower than Acne with atopic dermatitis group) within functional and total scales. 5) Acne group marked higher Qol scores than tinea cruris and normal group (lower than Atopic dermatitis group) within symptom scales. 6) In acne group that feel the necessity of medical treatment, group that be treated by occidental medical method marked lower Qol scores than group that don't be treated within functional, symptom, and total scales. 7) In acne group that don't be treated, group that feel the necessity of medical treatment marked higher Qol scores than group that don't feel within emotional, functional, and total scales. 8) Acne group that don't fee the necessity of medical treatment and be treated marked high scores than normal group within all scales. Conclusion : Acne is sometimes thought of as unimportant, but Acne significantly affects patient's Qol. Occidental medical treatment can help Acne patients to improve Qol. Even if someone who suffering from acne feel that he don't need to be treated, he had lower Qol than healthy controls. And we can expect that proper occidental medical treatment help him. But few study have discuss whether oriental medical method can improve Qol of acne patients. From now on we expect interesting study that measure effect of oriental medical therapy on Qol of Acne patients and compare with occidental medical therapy by using Qol mesure instrument.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.929-932
• /
• 2004

It is known that small amount of MgO in excess is often added to develop pure perovskite single phase of PMN-based composite, however, extra MgO precipitates in grains and inhibits densification of PMN. In this study PMN-PT-BT (PBT) powder was prepared by a conventional mixed oxide method using $(MgCO_3)_4{\cdot}Mg(OH)_2{\cdot}5H_{2}O$ instead of MgO. The precursor was heated at $500^{\circ}C/1h$ and its surface was modified with MgO sol. This effect was investigated in the aspects of sintering and dielectric properties. Small amount of added MgO sol ($0.5{\sim}1.0wt\%$) enhanced sintering substantially below $1000^{\circ}C$. The PBT with $0.5wt\%$ MgO sol sintered at $900^{\circ}C/2h$ had density of $7.62\;g/cm^3$, room temperature dielectric constant of 14800, loss of dielectric constant of $1.1\%$, which were comparable to those of the PBT sintered at $1000^{\circ}C/2h$. It was noticeable that the extra MgO precipitated mostly on triple points and grain boundaries and resulted in inhibition of grain growth.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.649-654
• /
• 2006

It was investigated the effects of pre-treatment method on the microbes on the surface of radish (Raphanus sativus L.) leaves. Independent variables put in water washing ($X_1$), microwave treatment ($X_2$) and steam treatment ($X_3$) using central composite design and response surface analysis. It was not detected in the pathogenic microbes, Samonella spp., Camphylobacter spp., Vibrio spp., Shigella spp., Staphyloccocus spp., on the surface of collected radish leaves without pre-treatment. But general microbes showed $3.90{\times}10^5{\sim}1.20{\times}10^7CFU/g$ of total microbes, $1.10{\times}10^2{\sim}2.00{\times}10^5CFU/g$ of E. coli, $2.40{\times}10^3{\sim}3.55{\times}10^6CFU/g$ of yeast/mold on the surface of various radish leaves and lactic acid bacteria was detected or not according to collected samples. The best method of pre-treatment was steam treatment on the microbe reduction effect of samples surface. Also, the multiplex regression coefficients analysis was calculated three independent variables ($X_1,\;X_2,\;X_3$) and dependent variables (total microbes, lactic acid bacteria and yeast/molds). It showed high correlation $R^2$, 0.89, 0.87, 0.85, respectively. For effective reduction of surface microbes, the best method was water washing with microwave or steam treatment at the same time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.12
• /
• pp.1647-1653
• /
• 2008

This study used response surface methodology (RSM) in an effort to optimize the water extraction conditions of Hypsizigus marmoreus in order to increase cytotoxicity activity of the extract. A central composite design was applied to investigate the effects of independent variables, which included the extraction temperature ($X_1$), extraction time ($X_2$), the ratio of solvent to sample ($X_3$) on dependent variables of the extracts, including extraction yield ($Y_1$) and protein content ($Y_2$). The estimated optimal conditions were as follows: $51.3^{\circ}C$ extraction temperature, 8.2 hrs extraction time, and 46.7 mL/g of solvent per sample. The extract (CE) was extracted at optimal condition and crude polysaccharides (CPS) were obtained from CE by ethanol precipitation, dialysis, and freeze drying. Neutral (NPS) and acidic (APS) fraction of polysaccharides were seperated from CPS by ion chromatography. The growth inhibitory effects of the APS (0.5 mg/mL) on AGS human cancer cells were 73.97%. CPS showed the highest growth inhibitory effects on HepG2 human cancer cell at 0.5 mg/mL. However all fraction polysaccharides from Hypsizigus marmoreus showed lower than 20% growth inhibition on SW480 human cancer cell.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.328-333
• /
• 1983

Due to fast industrialization and reduced agricultural population, there has been increased farm mechanization to reduce the labor requirement. In rice production, mechanical transplanting has been increasingly popular due to the heavy labor requirement in hand transplanting and development of convenient transplanters. For mechanical transplanting, rice seedlings is grown in boxes with limited soils under super dense population, thus short period of exposure to unfavorable temperature and poor water management would cause severe damage to rice seedlings such as seedling damping off and the similar physiological disorders. Several chemicals were evaluated for their effectiveness to control the disease and disorders, and other effects as plant growth stimulants. 3-hydroxy-5-methylisoxazole-a soil fungicide, Metalozyl-a fungicide which controls mildew, SF 8002-the composite of above two chemicals, and Isoprothiolane-a fungicide which controls rice blast were found to be effective controling seedling damping off and similar physiological disorders, and improvement of physiological characteristics of the seedlings such as the amount of bleeding sap, rooting ability, negative geotrophism, and regrowth after cutting. The results indicated that the chemicals will be very effective raising healthy seedlings even under unfavorable environments by the improvement of physiological activities of seedlings and preventing seedling damping off and the similar physiological disorders.