• 대한전기학회논문지:전력기술부문A
• /
• 제50권4호
• /
• pp.172-179
• /
• 2001

A component based method out of load modeling is to aggregate component load model according to the composition rate of each component load at load bus based on the circuit theory. But the most of component loads respond complex nonlinear characteristics respect to voltage and frequency variation due to the control techniques and semiconductor elements applied to component load. It needs to verify this approach through actual experiment of the aggregation of component load even if it can be down. To identify this aggregation method well known, this paper is proposed the classifying method of component load characteristics for component loads to group by quantitative analysis. The component load characteristics were divided into several types by KSOM (kohonen self organizing map), which can classify multi-dimension vector, component load pattern, into two-dimension vector. Some ambiguous cases happened from KSOM were classified by the proposed closing degree.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권3호
• /
• pp.179-182
• /
• 2003

Component-based method for load model not only should include the performances of the load components, but also should take into consideration the core losses of transformers, the line losses and the capacitor banks. Especially, capacitor bank affects the accuracy of reactive load model in load modeling. But it is difficult to identify actual reactive powers of capacitor banks in power system for load modeling. This research improves the component-based modeling method including uncertain capacitor bank. The proposed method is hybrid technique, which adds the measurement-based method to the existing component-based method for reliable information of capacitor band. The results of case studies were presented to verify the validity of the proposed method.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권2호
• /
• pp.45-52
• /
• 2002

Load modeling is classified into two methods according to approaching method, so called the measurement and component-based method. The measurement method is to model the load characteristics measured directly at substations and feeders. But it is difficult to measure continuously load characteristics from naturally occurring. system variation. The component-based method consists of the fellowing process; component load modeling, composition rate estimation and aggregation of component loads, etc. In this paper, the characteristic experiment of component loads was performed to obtain data for the component load modeling as the component-based method. At first, representative component loads were selected by the proposed method considering the accuracy of load modeling and the performance possibility of component load experiment in the laboratory. Also an algorithm was Proposed to identify the reliability of data obtained from the component load characteristic experiments. In addition, the results were presented as the case studies.

• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.96-101
• /
• 1999

전력계통에서 부하모델은 안정도 해석과 조류계산의 정도를 높이기 위하여 매우 중요하다. 전력계통의 모선은 전압/주파수 변화에 따라 소비형태가 다른 다양한 부하들로 구성되어 있다. 따라서 전압/주파수 변화에 따른 부하모델을 고려하지 않으면 안된다. 본 연구는 정도 높은 부하모델링을 위해 신경회로망을 사용하였다. 대표적인 주거용 부하를 선정하여 전압과 주파수를 변화시키면서 부하특성을 측정하였다. 실험에서 얻은 실적자료로 신경회로망을 이용한 개별부하모델을 구축하고, 개별부하모델과 부하구성비에 의한 집단부하 모델을 제시하였다. 또, 전력계통해석 프로그램에 적용하기 위한 수학적 모델로의 변환기법을 제시하였다.

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.65-71
• /
• 2013

Nonlinear loads with harmonics exist in an actual power system where harmonic currents make voltage distortion. The sum of reactive power measured at individual load is different from the measured reactive power at a bus in a power system with linear and non-linear loads. In this study, ANN(artificial neural network) load modeling technique with consideration of harmonics is introduced for more accurate component load modeling and an impact coefficient is proposed for aggregation of component loads. Results of this research show more accurate load modeling method. Since precise data for power system analysis can be acquired, the proposed method will be used for power system planning and maintenance.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.168-173
• /
• 2012

The aggregation of group loads, which consists of the linear and the non-linear systems, yields the error involved in the reactive power aggregation, which is greater than the active power aggregation in the component based load modeling. Each individual reactive power in a group load affects the aggregated load different from composition rate. This paper proposes a new method that determines the degree of impacts by adjusting the coefficient of weight factors of each load using the least squares error method. The effectiveness of proposed algorithm is demonstrated by simulating three aggregation cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1478-1480
• /
• 1999

The accurate analysis of power system requires detailed load model. There are two basic approaches in modeling the load characteristics. One is to directly measure the voltage and frequency sensitivity of the load P and Q at substations and feeders. The other is to build up a composite load model from each load component. Each of these methods has advantages and disadvantages. This paper presents load composition for KEPCO's power system to develop load models by the component-based load modeling.

• Journal of the Korean Data and Information Science Society
• /
• 제6권2호
• /
• pp.1-7
• /
• 1995

This paper considers the reliability estimation of a two-component shared-load system based on Freund model. Maximum likelihood estimator, order restricted maximum likelihood estimator and uniformly minimum variance unbiased estimator of the reliability function for the system are obtained. Performance of three estimators for moderate sample sizes is studied by simulation.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.200-207
• /
• 2024

A multi-component force sensor has been developed to measure force and moment components in high-speed flow media for submerged models. The size of the test model is determined based on the Reynolds number of the model at the test speed and expected blockage effect. A two-component force sensor unit has been created by assembling pairs of column elements arranged symmetrically under an eccentric load. The six-component force sensor is constructed with symmetric arrangements of two-component force sensor units in a rectangular plane. The signals generated from the strain gauges attached to the surface of the elements can be converted into force signals. The performance of the waterproof six-component force sensor has been evaluated through calibration. A simplified interference decomposition procedure has been introduced to increase the accuracy of measurement.

• 인터넷정보학회논문지
• /
• 제11권2호
• /
• pp.31-40
• /
• 2010

본 논문에서는 u-헬스케어 응용 서비스 지원을 위한 액티브 모델 기반의 서비스 컴포넌트를 제안한다. 서비스 컴포넌트는 헬스케어 응용 서비스의 개발을 지원하기 위해 기능을 세분화하여 구현하였다. 특히, 분산 객체그룹 프레임워크를 기반으로 다양한 헬스케어 홈서비스에 분산객체 기술을 이용하여 통합된 환경에서 적응형 정보 서비스를 제공하는데 중점을 두었다. 그리고 본 논문에서 제안한 서비스 컴포넌트를 헬스케어 홈 모니터링, 모바일 모니터링, 웹기반 모니터링과 같은 헬스케어 응용 서비스에 적용하여 수행 결과를 보인다. 또한 응답시간과 네트워크 부하와 시스템 부하에 대한 성능 평가 결과를 보였다.