• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1185-1192
• /
• 2003

In the component assembly and composition technique of software architecture, It is operated that the existing composition techniques based on architecture, ACME, Wright etc., used in FIFO with the direct connection structure between components through connector's Role. But, when the non-synchronizing request of components that have different characteristics occurs, the FIFO techniques is applied to the connector is difficult to process and operate effectively because of the high performance component waiting the sequence order if the low performance component is allocated first. Thus, the allocated request process according to the priority considering the characteristics of each call components in connector is necessary to improve the operation of assembled component. In this research, we extend the connector part that is available in multiplex connection structure based on existent Wright specification. For service process requested from component, the connector part is designed and implemented to operating with priority sequence through calculating the weight of CPU use rate, bean requesting process time and memory use rate among the efficiency elements of assembled components. To verify the efficiency if this designed connector, we implemented 20 samples EJB components that have different efficiency characteristics and applied these samples components to designed connector. The operating results with this designed connector show that the efficient operation of whole system is possible though the processing time takes 481ms more than the time of the existing FIFO techniques.

• Journal of Korean Society for Quality Management
• /
• v.43 no.4
• /
• pp.499-510
• /
• 2015

Purpose: This paper treats the improvement of the quality and reliability of military weapon systems based on the maintenance data. Methods: The proposed method of the data integration and refinement are used to obtain the component reliability information and to find the frequently failed components based on the Pareto analysis. Based on the reliability information and the number of failed component frequencies, the target components of quality improvement are determined and improved by multiple methods such as engineering changes, special meetings, additional training and revising maintenance manuals. Results: Based on the proposed process, we find some components which need to be improved in order to enhance the quality and reliability. Conclusion: A process is developed for improving the quality and reliability of weapon systems. This process will be adopted by various weapon systems to enhance the quality and reliability, as well as reduce military spending.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.3862-3879
• /
• 2019

More and more problems for public security have occurred due to the limited solutions for drone detection especially for micro-drone in long range conditions. This paper aims at dealing with drones detection using a radar system. The radio frequency (RF) signals emitted by a controller can be acquired using the radar, which are usually too weak to extract. To detect the drone successfully, the static clutters and linear trend terms are suppressed based on the background estimation algorithm and linear trend suppression. The principal component analysis technique is used to classify the noises and effective RF signals. The automatic gain control technique is used to enhance the signal to noise ratios (SNR) of RF signals. Meanwhile, the empirical mode decomposition (EMD) based wavelet transform (WT) is developed to decrease the influences of the Gaussian white noises. Then, both the azimuth information between the drone and radar and the bandwidth of the RF signals are acquired based on the statistical analysis algorithm developed in this paper. Meanwhile, the proposed accumulation algorithm can also provide the bandwidth estimation, which can be used to make a decision accurately whether there are drones or not in the detection environments based on the probability theory. The detection performance is validated with several experiments conducted outdoors with strong interferences.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.344-349
• /
• 2017

Suspension noise from under a passenger car is one of the important factors that impact the perceptual quality for drivers. However, it is difficult to validate this by component level testing in the early stage of development, because suspension noise caused by interaction of the related parts has been found at saleable vehicles late during development or at the manufacturing stage, when many customers have already filed for claims. This study proposed a validation testing under research by the DFSS process that enables reproduction of vehicle level noise by component level testing using a shock absorber with the related parts, such as urethane bumper and top mount. This study also developed a compromised test matrix while analyzing the noise factors through experimental design and analysis of variance to determine what factors can affect noise. Based on this study, we expect that the vehicle level and customer claim can be validated during initial development timing by a more reliable component noise validation test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.2
• /
• pp.62-68
• /
• 2013

The dynamic voltage restorer (DVR) is an effective protection device for wind turbine generators based on doubly-fed induction generator (DFIG) that is operated under unbalanced voltage dip conditions. The compensating voltages of the DVR depend on the voltage dips and on the influence of the zero sequence component. The zero sequence component results in high insulation costs and asymmetry in terminal voltages. This paper proposes the use of a proportional-resonant controller in stationary reference frames for controlling zero sequence components in the DVR to protect the DFIG during unbalanced voltage dips. To enhance the proposed control method, a comparison is carried out between two cases: with and without using the control of a zero sequence component. Simulation results are presented to verify the effectiveness of the proposed control method by using the Psim simulation program.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.85-89
• /
• 2011

Component reliability data were analyzed by using PRinS(Plant Reliability data information System) based on the latest operating experiences of eight KSNPs(Korea Standard Nuclear Power plants), and these new data were applied to the KSNP PSA models. In addition, the existing PSA models were revised for reflecting as-built and as-operated plant conditions. As a result of newly performing PSA in this paper, CDF and LERF were estimated 26.1% and 18.2% lower than the existing values, respectively. It was identified that the risk measures decreased not because of revising the models but because of applying the new component reliability data. The result and the method of this paper could be used when generating plant specific data and performing the living PSA in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.921-924
• /
• 2005

Embodid Community web application program preservation, damage control and resuability uses EJB component that is high breakup object system than existent model 1 web program. Web programs that is in existing hard to exist on course which UI logic is same with business logic and do maintenance and resuability. But, improved resuability of business separating business logic and UI logic by different machine embodying program to use component. Minimizes Teuranjeksyeon and Paeilobeo and embodied in stabler program than existing by using EJB component.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1547-1553
• /
• 2008

This paper presents a method that generates various facial expressions of vector graphic character by using the simplified principle component vector. First, we analyze principle components to the nine facial expression(astonished, delighted, etc.) redefined based on Russell's internal emotion state. From this, we find principle component vector having the biggest effect on the character's facial feature and expression and generate the facial expression by using that. Also we create natural intermediate characters and expressions by interpolating weighting values to character's feature and expression. We can save memory space considerably, and create intermediate expressions with a small computation. Hence the performance of character generation system can be considerably improved in web, mobile service and game that real time control is required.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.83-91
• /
• 2022

Seismic design and analysis of nuclear power plant components are performed based on an decoupled model. However, this decoupled analysis has a limitation in that it generates inaccurate results compared to the coupled analysis because it cannot simulate actual phenomena such as the interaction between structures and components. Thus, this study performed seismic coupled and decoupled analysis on an existing nuclear containment structure and related components, considering the mass and natural frequency ratios. And based on these results, comparative analyses of responses of components were conducted. Consequently, the seismic coupled analysis result generally gave a smaller value than the decoupled analysis result. These results were similar to the analysis results for the simple coupled model, which was an existing study, but the difference in component responses was much more pronounced. Also, this was influenced by the installation location of the component rather than the influence of the input frequency of the input seismic motions. Finally, the difference between the decoupled and coupled seismic analysis occurred in the region where the mass ratio of the components was large, and the natural frequencies were almost similar due to the considerable dynamic interaction between the structure and the component in this realm.