• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.789-790
• /
• 2008

In this paper, we introduce the multi-target-based auto surveillance algorithm. Multi-target-based surveillance system detects intrusion objects in the specified areas. The proposed algorithm can divide into two parts: i) background generation, ii) object extraction. In this paper, one of the optical flow equation methods for estimation of gradient method used to generate the background [2]. In addition, the objects and back- ground video images that are continually entering the differential extraction.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1467-1472
• /
• 2003

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. This fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper focuses on fouling analyses for six heat exchangers of two primary systems in two nuclear power plants; the regenerative heat exchangers of the chemical and volume control system and the component cooling water heat exchangers of the component cooling water system. To analyze the fouling for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. Based on the results of the fouling analyses, the present thermal performances and fouling levels for the six heat exchangers were predicted.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.303-309
• /
• 2015

The construction process and safety management are an important means of the total projects for the decision-making. As an important management tool of cost, resources and risks of the project, the analysis and evaluations are recorded as an important asset of company. Also, it has become a safety device that could reduce risk factors repeatedly by the decision-making methods for the future similar projects. Component-based software, by reusing the useful part, which was prepared without newly developing all that, by building a new software product, the long-term continuous/steady through the provision of a component-based software, by securing a sales base, it should be the development and supply a wide range of applications. In this paper, we propose the construction process control systems for increasing modifiability of process creation and modification for business efficiency in accordance with the diverse trends in the construction process as a low-cost niche through a component-based software supplier to solve these problems.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.65-74
• /
• 2002

The CBD(component based development) method has recently been on the rise as the main current among all fields of developing Information Systems. The developing system by building and integrating of components is encouraged in GIS sphere. Business domain which considerably identifies components occupies GIS shpere rather then any other sphere. Arithmetic function is quite needed in GIS sphere but non-arithmetic functions are also used in GIS sphere as well as in enterprise sphere. Component is characterized by ensuring the reuse of itself. The efficiency of reusing component is promoted as the component is functionally simple and is packed to a minimum. The GIS Component Extraction Method has already been presented in several studies but this study is about the GIS Component Extraction by the Affinity Analysis Method. CBD uses UML on a basis and the core of the UML is consisted of the use case and the class. The purpose of the Affinity Analysis is a study how relate between the use case and the class in a certain business domain and then the results identify the component. The Affinity Analysis is useful not only in GIS but also in every business domain and is considered to be popular as the procedure of this method is not complex at all.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1105-1113
• /
• 1999

객체 지향 소프트웨어의 확장과 더불어 소프트웨어의 재사용성의 중요도가 부각되면서 소프트웨어를 콤포넌트 단위로 구현하는 추세이다. 따라서 콤포넌트 기반의 소프트웨어 개발에서의 통합 테스트가 중요한 이슈로 떠오르고 있다. 그러나 콤포넌트들의 통합 테스트에 대한 연구는 미흡한 상태이다. 본 논문에서는 UML을 기반으로 체계적인 통합 테스트 모형을 제안하고. 나아가 본 논문에서는 "멀티미디어 정보처리 시스템"의 사례를 본 논문의 콤포넌트 통합 테스트 모형에 적용한 결과를 분석하여 기술한다. 콤포넌트 통합 테스트 모형은 UML(Unified Modeling Language)의 순서도(sequence diagram)와 협력도(collaboration diagram)를 이용하여 전체 시스템에서 UML의 사건흐름을 구성하는 콤포넌트들 사이의 인터페이스 영역에 존재하는 오류들을 추출한다. 그리고 UML을 기반으로 통합 테스트를 수행함으로써, 테스트 준비 작업을 줄이고, 기존의 UML 지원 도구들과 연계하여 테스트 자동화 도구의 구현을 앞당길 수 있다. 또한 시스템의 순차적 흐름 뿐 아니라, 동시에 수행되는 흐름에 대한 정보까지 모두 수용하여 테스트함으로써, 콤포넌트 기반의 분산 환경의 특성에 적합하다. Abstract As the object-oriented approach to software development becomes more mature, software development from pre-existing, independently developed components becomes an important aim of software engineering. Therefore, integration testing becomes an important aspect of component-based software development. However, there has been little work done in the area of the component-based integration testing. In this paper, we propose the "component integration test model" which is based on UML. Furthermore, we describe a case study on "Multimedia Information Processing System" conducted to analyse the result from which our model is applied. Our model extracts the faults, which exist in interfaces of components, using sequence diagram and collaboration diagram of UML(Unified Modeling Language). As our model is based on UML, the preparation effort for testing is reduced and its test-tools can be implemented more easily through linking existing UML tool. And our model accepts the information of concurrent flow represented by collaboration diagram as well as sequential flow, so it is more suitable to component-based distributed environment.based distributed environment.

• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.145-163
• /
• 2024

The evaluation of dynamic characteristics of bridges under operational traffic loads is a crucial aspect of bridge structural health monitoring. In the vehicle-bridge interaction (VBI) system, the vibration responses of bridge exhibit time-varying characteristics. To address this issue, an accurate time-frequency analysis method that combines the autoregressive power spectrum based empirical wavelet transform (AR-EWT) and local maximum synchrosqueezing transform (LMSST) is proposed to identify the time-varying instantaneous frequencies (IFs) of the bridge in the VBI system. The AR-EWT method decomposes the vibration response of the bridge into mono-component signals. Then, LMSST is employed to identify the IFs of each mono-component signal. The AR-EWT combined with the LMSST method (AR-EWT+LMSST) can resolve the problem that LMSST cannot effectively identify the multi-component signals with weak amplitude components. The proposed AR-EWT+LMSST method is compared with some advanced time-frequency analysis techniques such as synchrosqueezing transform (SST), synchroextracting transform (SET), and LMSST. The results demonstrate that the proposed AR-EWT+LMSST method can improve the accuracy of identified IFs. The effectiveness and applicability of the proposed method are validated through a multi-component signal, a VBI numerical model with a four-degree-of-freedom half-car, and a VBI model experiment. The effect of vehicle characteristics, vehicle speed, and road surface roughness on the identified IFs of bridge are investigated.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1239-1246
• /
• 2004

The integration and union of regional digital map and vehicle location data in e-Logistics which means virtual service architecture based on the Internet among the logistics companies is indispensable clause in order to satisfy the visibility characteristics. Most conventional vehicle monitoring and controlling systems were constructed with individual and mutual exclusive architecture so that there are required lots of cost for sharing and integrating the information among them. In this paper, we design and implement an component-based open system which represent moving object location information as well as digital map using the GML(Geography Markup Language - international standard encoding based on XML). We also test proposed system on the delivery vehicle scenario in e-Logistics environment, and validate its superior in terms of extensibility and interoperability.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.113-121
• /
• 2000

This paper presents a parallel-structure fuzzy system(PSFS) for prediction of time series data. The PSFS consists of a multiple number of fuzzy systems connected in parallel. Each component fuzzy system in the PSFS predicts the same future data independently based on its past time series data with different embedding dimension and time delay. The component fuzzy systems are characterized by multiple-input singleoutput( MIS0) Sugeno-type fuzzy rules modeled by clustering input-output product space data. The optimal embedding dimension for each component fuzzy system is chosen to have superior prediction performance for a given value of time delay. The PSFS determines the final prediction result by averaging the outputs of all the component fuzzy systems excluding the predicted data with the minimum and the maximum values in order to reduce error accumulation effect.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.96-101
• /
• 1999

Load model is very important to improve accuracy of stability analysis and load flow study in power systems. A power system bus is composed by various loads, and loads have different power consumption due to voltage/frequency changing. Thus the effect of voltage/frequency changing must he considered to load mxleling. In this research, ANN was used to construct component load moddel for more accurate load mxleling. Typical residential load was selected, and characteristics exrerimented on voltage/frequency changing. Acquired data used to construct the component ANN model, and aggregation method of component load model was presented based on component load model and composition rate. Furthennore, it's transfomlation method to the mathematical load model to he used at the traditional power system analysis soft wares was also presented.sented.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.747-752
• /
• 2001

UML is a standard language that models an analysis and design process in the development of an application system or components, CORBA, COM+, EJB and others are the techiniques that are realized reuse of components. After it is distinguished between reusable components and new components on the components development process and is developed, the developing cost of components or application system can be reduced and the components of superior in quality can be created. This paper defines the extended UML notation that needed in modeling of the products created from the development process of components. Also, this paper introduces a modeling of components and UML application method that needed in development of an auction system based on Web.