• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1047-1053
• /
• 2009

The future use of hydrogen as an energy source is expected to increase on account of its environmentally friendliness. In order to enhance the production of hydrogen, Pd ions (0.01, 0.05, 0.1, and 0.5 mol%) were incorporated $TiO_2$ (Pd-$TiO_2$) and used as a photocatalyst. The UV-visible absorbance decreased with increasing level of palladium incorporation without a wavelength shift. Although all the absorption plots showed excitation characteristics, there was an asymmetric tail observed towards a higher wavelength caused by scattering. However, the intensity of the photoluminescence (PL) curves of Pd-$TiO_2$ was smaller, with the smallest case being observed at 0.1 and 0.5 mol% Pd-$TiO_2$, which was attributedto recombination between the excited electrons and holes. Based on these optical characteristics, the evolution of $H_2$ from methanol/water (1:1) photo-splitting over Pd-$TiO_2$ in the liquid system was enhanced, compared with that over pure $TiO_2$. In particular, 2.4 mL of $H_2$ gas was produced after 8 h when 0.5 g of a 1.0 mol% Pd-$TiO_2$ catalyst was used. $H_2$ was stably evolved even after 28 h without catalytic deactivation, and the amount of $H_2$ produced reached 14.5 mL after 28 h. This is in contrast to the case of the Pd 0.1 mol% impregnated $TiO_2$ of $H_2$ evolution of 17.5 mL due to the more decreasedelectron-hole recombination.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.99-100
• /
• 2015

Digital image blur occurs due to various environmental conditions at the time of shooting. Blur produces the low-frequency component in the image. This problem worsens the quality of the digital image. To address this issue, contrast improvement methods has been widely studied. 2D filter to enhance the edges is a simple structure with a fast processing speed. However, the sensitivity of the human visual system is different depending on the surrounding brightness locally. Thus, in this paper, we proposed feature-based contrast enhancement method for the digital image using 2D filter to enhance the edges and JND(Just Noticeable Difference) according to the surrounding brightness. We confirmed the result image of proposed method and identified that the contrast is improved.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.3
• /
• pp.235-243
• /
• 2010

This paper describes a design method of LCL filter for grid-connected three-phase PWM inverter. First, by analyzing the ripple component of phase voltages and currents according to the PWM pattern of grid-connected three-phase inverter, the RMS value of the current ripple can be calculated. Then based on the analysis, the current THD in the inverter-side can be defined. After that by analyzing the dependency between the current THD of the system and the current ripple attenuation, the parameter of LCL filter can be designed. Finally, the described LCL filter design method is verified by showing a good agreement between the target current $THD_g$ and the actual one through the simulation and experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.49-56
• /
• 2017

This paper proposes a method to improve the left right discrimination performance by eliminating the imaginary target based on the frequency features of the beam pattern for bow array. The beamwidth of the imaginary target is wider than that of the real target. If an azimuth axis is considered as a time axis, the real and the imaginary targets can be assumed as high and low frequencies, respectively. To eliminate the imaginary target which has a low frequency component, we design a cut-off frequency of the High Pass Filter (HPF) using the back-lobe imaginary beamwidth. The real target is estimated by eliminating the imaginary target by applying HPF to the entire power of the beamformer output. Computer simulations show that the proposed method can increase the left right discrimination performance above 8 dB on average.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.448-455
• /
• 2018

Glass wool is an eco-friendly materials that is manufactured through a continuous process by processing waste glass. This materials is low cost compared with another materials and has excellent thermal conductivity. For this reason, glass wool is installed as insulation system for LNG carriers and as insulation of building wall as well as various industries. The mechanism of insulation of glass wool is the conduction of the wool itself and convection by space between fibers. Therefore, in order to develop the enhanced thermal conductivity of glass wool is necessary to reduce its own conduction or to insert additional material after manufacturing as well as prevent convection. In this respect, many researchers have been actively studying to decrease thermal conductivity of polyurethane foam using by inserted glass wool or change the chemical component of glass wool. However, many research are aiming reduction of glass wool itself. This study focus on post-processing and inserted different materials; silica-aerogel, kevlar fiber 1mm, 6mm and glass bubble. Experimental results show that the thermal conductivity almost decreases with the addiction of glass bubble and silica aerogel.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.208-211
• /
• 2008

Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.280-286
• /
• 1986

A newmethod of fast mask operators for edge detection is proposed, which is based on the matrix factorization. The output of each component in the multi-directional mask operator is obtained adding every image pixels in the mask area weighting by corresponding mask element. Therefore, it is same as the result of matrix-vector multiplication like one dimensional transform, i, e, , trasnform of an image vector surrounded by mask with a transform matrix consisted of all the elements of eack mask row by row. In this paper, for the Sobel and Prewitt operators, we find the transform matrices, add up the number of operations factoring these matrices and compare the performances of the proposed method and the standard method. As a result, the number of operations with the proposed method, for Sobel and prewitt operators, without any extra storage element, are reduced by 42.85% and 50% of the standard operations, respectively and in case of an image having 100x100 pixels, the proposed Sobel operator with 301 extra storage locations can be computed by 35.93% of the standard method.

• IMMUNE NETWORK
• /
• v.9 no.3
• /
• pp.98-105
• /
• 2009

Background: It has been recently noticed that type 2 diabetes (T2D), one of the most common metabolic diseases, causes a chronic low-grade inflammation and activation of the innate immune system that are closely involved in the pathogenesis of T2D. Cordyceps militaris, a traditional medicinal mushroom, produces a component compound, cordycepin (3'-deoxyadenosine). Cordycepin has been known to have many pharmacological activities including immunological stimulating, anti-cancer, and anti-infection activities. The molecular mechanisms of cordycepin in T2D are not clear. In the present study, we tested the role of cordycepin on the anti-diabetic effect and anti-inflammatory cascades in LPS-stimulated RAW 264.7 cells. Methods: We confirmed the levels of diabetes regulating genes mRNA and protein of cytokines through RT-PCR and western blot analysis and followed by FACS analysis for the surface molecules. Results: Cordycepin inhibited the production of NO and pro-inflammatory cytokines such as IL-$1{\beta}$, IL-6, and TNF-${\alpha}$ in LPS-activated macrophages via suppressing protein expression of pro-inflammatory mediators. T2D regulating genes such as $11{\beta}$-HSD1 and PPAR${\gamma}$ were decreased as well as expression of co-stimulatory molecules such as ICAM-1 and B7-1/-2 were also decreased with the increment of its concentration. In accordance with suppressed pro-inflammatory cytokine production lead to inhibition of diabetic regulating genes in activated macrophages. Cordycepin suppressed NF-${\kappa}B$ activation in LPS-activated macrophages. Conclusion: Based on these observations, cordycepin suppressed T2D regulating genes through the inactivation of NF-${\kappa}B$ dependent inflammatory responses and suggesting that cordycepin will provide potential use as an immunomodulatory agent for treating immunological diseases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.568-574
• /
• 2015

Recently RFID not only is widely utilized in various fields such as inventory management, merchandize logistics, etc., but also, has evolved as an important component of the Internet of Things (IoT). According to increasing the utilization field of RIFD, studies for security and privacy for RFID system have been made diverse. Among them, the ownership transfer protocols for RFID tags have also been proposed in connection with the purchase of products embedded with RFID tag. Recently, Kapoor and Piramuthu proposed a RFID ownership transfer protocol to solve the problems of security weakness of the previous RFID ownership transfer protocols. In this paper, we show that Kapoor-Piramuthu's protocol also has security problems and provide a new protocol to resolve them. Security analysis of newly proposed protocol shows the security concerns are resolved.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.747-754
• /
• 2009

Software product line engineering is an approach to creating core assets by systematically exploits common that can be highly reusableand different characteristics in related system families that is domain. By adapting this approachin object and component paradigm, software productivity is extended. Recently, Software development paradigm is changed to service oriented paradigm which is using services that are core assets. Therefore, to develop service oriented software more flexible, systematic and to enhance business agility about business changes, we need adaptation of product line to creation of services that are core assets. In this paper, we propose an approach to create and specify domain service through combine of product line and service oriented paradigm. Domain service explicitly specifies commonality and variability by domain service common/optional property variability, operation type variability, message type variability. By using this approach, it can support efficient and flexible service oriented development by producing various services through customization of domain service for the purpose.