• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.339-347
• /
• 1996

object-oriented programming is used to develop next-generation telecommu- nications services running on the distributed processing environment. In order to test these services efficiently at the system-level during not only in the development phase but also in the operation phase, we define an embedded monitor service within the infrastructure to monitor the operation of the distributed programs, and describe a system-level test mechanism based on the monitor service. By separating the function of monitor server which monitors operations of objects and collects monitored data and that of tester which makes analysis and decides the sequence of test events, the invasive effect of monitoring can be minimized. At the same time, accurate diagnosis on the system can be achieve by exploiting the test mechanism. The mechanism, as a core component for the implementation of real-time fault-tol-erant systems, is applicable to general-purpose distributeded systems as well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.521-527
• /
• 2011

POWER PC series are common to the Central Processing Unit for Military Single Board Computer. Among them, G4 group, which contains the 74xx series supported by Freescale manufacturer is mainly used in the Military applications. We focus on the Interface between memory and controller. PCB stacking method, component routing, impedance matching and harsh environment for Military spec are the main constraints for implementation. Also, we developed memory as a module for the consideration of Military environments. The overall type of SBC should be designed by the form of 6U VME or 3U VME. Therefore this study suggests the electrically optimum Interface matching, Artwork technology based on the signal cross over and PCB stacking method on the harsh environment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.6
• /
• pp.1463-1475
• /
• 2019

Unlike the past, modern high-tech weapons systems are complex and many components are combined to form a weapons system. In addition, unlike the past, where hardware was the main component, the proportion of software is increasing every year, making the security assurance activities of weapon systems more difficult than in the past. The United States has been working to ensure the security of the weapons systems they develop since the 1960s. The findings were made to US internal standards, updated regularly, and are now being applied as RMF. In Korea, research activities have been conducted since 2010 based on the RMF of the United States. However, actual RMF application cases in the United States cannot be classified and obtained, and there are no official cases in Korea. In this paper, we apply Korean RMF research that has been studied so far to apply to the recently developed real weapon system. Thus, detailed guidelines for applying the RMF are presented.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.619-630
• /
• 2002

The various software engineering techniques have been come out in order to cope with the software crisis since 1980's. The software Engineering has focused on the process of software component development. The process products a development guide for a quality and productive improvement of software. But, most of the methodologies assume that a new system will be constructed and reused in the future. these do not actually support efficiently how we reuse legacy system's resources and construct a new system. In this paper, we present an efficient Reengineering Process for reusing legacy systems, RUP+re, which extends and customizes RUP. Rup+re consists of Reverse Engineering Workflow, Re-Engineering Workflow and forward Engineering Process. We describe RUP+re's workflows with their own detail steps and verify them practically through the case study. So, we provide efficient guidelines to the software Reengineering process construction which reuses the resources of a legacy system.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1231-1238
• /
• 2004

By virtue of the advanced Internet technology, there are lots of research works for e-Logistics which means virtual business activities or service architecture based on the Internet among the logistics companies. Because e-Logistics environment requires more dynamic and global service area, conventional vehicle monitoring and control technologies innate many problems in terms of Integrating, storing and sharing the location data. It needs the development of the moving object technology in order to resolve efficiently the limitations. In this paper, we propose the whole components of the moving object management system which supports the advanced sharing the location information as well as the integration of location data. We are sure the suggested system can be adopted to construct the next generation-logistics vehicle monitoring and control system by reducing the overall cost and time.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.8-17
• /
• 2014

The aims of this research were to evaluate effects of biomass co-firing to pulverized coal power plants and the variation of co-firing ratios on the plant efficiency related to power consumption of auxiliary system and flue gas characteristics such as production and component by process simulation based on the existing pulverized coal power plant. In this study, four kinds of biomass are selected as renewable fuel candidates for co-firing: wood pellet(WP), palm kernel shell(PKS), empty fruit bunch(EFB) and walnut shell(WS). Process simulation for various biomass fuels and co-firing ratios was performed using a commercial software. Gas side including combustion system and flue gas treatment system was considering with combination of water and steam side which contains turbines, condenser, feed water heaters and pumps. As a result, walnut shell might be the most suitable as co-firing fuel among four biomass since when 10% of walnut shell was co-fired with 90% of coal on thermal basis, flue gas production and power consumption of auxiliary systems were the smallest than those of other biomass co-firing while net plant efficiency was relatively higher than those of other biomass co-firing. However, with increasing walnut shell co-firing ratios, boiler efficiency and net plant efficiency were expected to decrease rather than coal combustion without biomass co-firing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.409-416
• /
• 2017

In order that multiple wideband RF transmitters which have mission to deliver essential information to aircraft operate at the same time, RF transmitter has a variable sub-carrier frequency to modulate the signal. In case of exposure to weak environment, Wide-band RF transmitter is designed to check component of transmitter that includes antenna BIT to increase system reliability. Normally, Antenna BIT measure the reflection RF power of antenna to check system condition. However, Antenna BIT has a difference that depends on testing frequency to use the long RF cable which is located between the power amp and the antenna. The periodic phenomenon of the reflected antenna power are theoretically explained about dependence on the RF cable length. Based on presented result, suggested measurement methods is effectively able to be applied to diagnosis system condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1364-1370
• /
• 2014

Power system fault analysis has been based on symmetrical component method, which describes power system elements by positive, negative and zero sequence impedance. Obtaining accurate line impedances as possible are very important for estimating fault current magnitude and setting distance relay accurately. Especially, accurate calculation of zero sequence impedance is important because most of transmission line faults are line-to-ground faults, not balanced three-phase fault. Since KEPCO has started measuring of transmission line impedance at 2005, it has been revealed that the measured and calculated line impedances are well agreed within reasonable accuracy. In case of underground transmission lines, however, large discrepancies in zero sequence impedance were observed occasionally. Since zero sequence impedance is an important input data for distance relay to locate faulted point correctly, it is urgently required to analyze, detect and consider countermeasures to the source of these discrepancies. In this paper, development of pre/post processor to ATP (Alternative Transient Program) version of EMTP (Electro-Magnetic Transient Program) for sequence impedance calculation was described. With the developed processor ATP-cable, effects of ground resistance and ECC (Earth Continuity Conductor) on sequence impedance were analyzed.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.349-355
• /
• 2016

Divinycell, which functions as both insulation and a supporting structure, is generally applied in the NO96-type liquefied natural gas (LNG) insulation system. Polymer-material-based Divinycell, which has a high strength and low weight, has been widely used in the offshore, transportation, wind power generation, and civil engineering fields. In particular, this type of material receives attention as an insulation material because its thermal conductivity can be lowered depending on the ambient temperature. However, it is difficult to obtain research results for Divinycell, even though the component materials of the NO96-type LNG cargo containment system, such as 36% nickel steel (invar steel), plywood, perlite, and glass wool, have been extensively studied and reported. In the present study, temperature and strain-rate dependent compressive tests on Divinycell were performed. Both the quantitative experimental data and elastic recovery are discussed. Finally, the mechanical characteristics of Divinycell were compared to the results of polyurethane foam insulation material.

• Nuclear Engineering and Technology
• /
• v.18 no.2
• /
• pp.78-84
• /
• 1986

An equation of material number density sensitivity coefficient is derived using first-order perturbation theory. The beginning of cycle of Super-Phenix I is taken as the reference system for this study. Effective multiplication factor of the reference system is defined as system response function and fuel enrichment and fuel effective density are chosen for the variation of reference input data since they are described by material number density which is a component of Boltzmann operator. The nuclear computational code system (KAERI-26 group cross section library/1DX/2DB/PERT-V) is employed for this calculation. Sensitivity coefficient of fuel enrichment on effective multiplication factor is 4.576 and sensitivity coefficient of effective fuel density on effective multiplication factor is 0.0756. This work shows that sensitivity methodology is lesser timeconsuming and gives more informations on important design parameters in comparison with the direct iterative calulation through large computer codes.