• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1091-1093
• /
• 2002

In this paper, the load torque observer is designed for speed and torque control of DC motor. Load torque is very sensitive to the variation and disturbance of the input parameters. The proposed system can accurately estimate the instantaneous speed even at the low speed range by using the load torque observer based on the torque component of DC motor. The system becomes robust against disturbances using a feed-forward control of the load torque estimated automatically at the speed observer.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.349-355
• /
• 2010

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This paper leads to separate a in-out data overload of integrated EPCIS event and suggests the method to effectively manage EPCIS repository for exchanging data smoothly. In order to verify a effectiveness, we measure the performance of the system using a simple testing simulation by comparing existing method and suggested method.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.288-294
• /
• 2015

Recently, the module-integrated converter has shown an interest in the photovoltaic generation system. In this system, the high frequency transformer should be compact and efficient. The proposed method is based on the correlation characteristic between the copper and core loss to minimize the loss of transformer. By sizing an effective cross-sectional area and window area of core, the amount of loss is minimized. This paper presents the design and analysis of high frequency transformer by using the 3D finite element model coupled with DC-DC converter circuit for more accurate analysis by considering the nonlinear voltage and current waveforms in converter circuit. The current waveform in each winding is realized by using the ideal DC voltage source and switching component. And, the thermal analysis is performed to satisfy the electrical and thermal design criteria.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.213-218
• /
• 2013

In this paper, when vehicle inspection is made, the check way is recommended based on the intelligent and personalized in the workplace, education, and other space-time according to the current situation. These results increase productivity, reduce costs, and improve performance. So we designed vehicle inspection recommendation system using ontology. Recommendation method is that components connected concept are shown according to weight value. if components are connected with other concept, the components are extended.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.802-806
• /
• 2001

Diesel particulate trap is the most reliable system to reduce the particulate matters from diesel engine. Filter is the core component of DPF and ceramic monolith type is dominantly used, which is expensive and fragile relatively at thermal shock. Porous metal filter, which has superior thermal characteristics and low cost, was tested in order to analyze the regeneration performance by using with ferrocene additive. This filter showed the 72% filtration efficiency, additives itself diminished 48% of PM from engine out emission, and final PM reduction ratio of 89% was achieved by DPF system with D-13 test mode.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.484-486
• /
• 2004

In this paper, the power electronics requirement and the controls of an induction motor for fuel cell electric vehicle system are presented. The power topology is selected based on performance, cost, size, volume, manufacturability, component count and simplicity. Another highlight of the topology is the reduction of battery bank and its control strategy. The proposed approach consists a full-bridge DC/DC converter to boost the fuel cell voltage. The induction motor operated with vector control is driven by a three-phase PWM inverter supplied by the DC-link voltage. The investigation of the electric vehicle performed due to parameter variation of the induction motor has been presented.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.470-472
• /
• 1996

In this paper, we proposed a new speed control algorithm based on the least-order observer theory. The proposed system using the new algorithm can estimate the instantaneous speed accurately even at low speed by using a load torgue observer estimating the torgue component of indirect-vector controlled induction motor. Thus the stable characteristics of speed control are possible at low speed even in the case of using low-resolution rotary encoder. Also, the system becomes robust against disturbance by feedforward control the load torque estimated automatically at the speed observer.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.123-134
• /
• 2004

This paper deals with the feasibility analysis and alternatives for infrared detector development. The purpose of this paper analyze development requirement and feasibility study in both technology and cost. We get raw input data for system engineering process from development and technical expert, and then analyze cost and technology for development feasibility, and alternative study. Infrared Detector is core component of Thermal Imaging System and developed by ADD from 2006 to 2008 year. Technical level is analyzed by TRL(Technical Readiness Level) and AOA(Analysis of Alternative) is done by development and production cost estimate. We use SEER-H tool for cost estimate, that is parametric cost estimate tool based on Knowledge Base. Also this paper presents risk analysis for project management because it is necessary to risk driver management during the infrared detector development. The result of IR Detector feasibility and alternative study will be used in technical and cost analysis. This study can help those who are related to the cost analysis and development feasibility of other weapons

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.415-424
• /
• 2002

In this paper, a robust fuzzy precompensated PID controller using immune algorithm for load frequency control of 2-area power system is proposed. Here, a fuzzy precompensated PID controller is designed as a fuzzy logic based precompensation approach for PID controller. This scheme is easily implemented by adding a fuzzy precompensator to an existing PID controller. We optimize the fuzzy precompensator with an immune algorithm for complementing the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership function and fuzzy rules. Simulation results show that the proposed robust load frequency controller can achieve good performance even in the presence of generation rate constraints.